Brevetti AUT-2012 Vnailer

Includes several coils / rolls of corrugated nails
From the seller: "In good working order."
Serial #: 160K
Model: AUT 2012
Year: 2000
Manufacturer's Information

Brevetti AUT 2112
(Please note is for the newer generation model 2112. Contact manufacturer for differences between the 2 models)

Ideal for small to medium production, the PRISMA CE utilizes a unique horizontal cutting stroke which reduces the vibration transmitted to the operator and produces a smoother and more consistent miter.
Features:

• Electro-pneumatic back nailer for the assembly of any shape and kind of frames either square, hexagonal, octagonal and dodecagonal (12 sided).
• The machine automatically glues, presses, and staples.
• The machine is supplied (3) versions (to be specified at the time of order).
• For stapling in "soft woods" the VC coil staples are used, and for hard wood and man made wood such as MDF you would use the "NR" coils.
• The three stapling units are interchangeable on the same machine. (Eliminating the need to purchase (3) different machines).
• The staples are available in different sizes, according to the height of the mouldings.
• It is possible to insert staples automatically in up to 10 different pre-set positions along the base of the moulding, to stack up to 4 staples in each position and to store the different working programs.
• The PLC operator control panel is easy to use in selecting or modifying the working program and to check all machine functions.
• The machine is capable of joining mouldings from 10 mm in width and 6 mm in height up to 120 mm in width and 65 mm in height.
• Equipped with automatic gluer for Hot Melt or Cold Glue.
• Specifications:

• Maximum Width:  65 mm (2 1/2")
• Minimum Width:  (3/8")
• Maximum Height:   65 mm (2 1/2")
• Minimum Height:  6 mm  (1/4")
• Hold Downs:  Two (2)
• Staple Types:  NR, VR, VM, VC
• Operation:  Pneumatic  (foot pedal)
• Air Requirement:   6 Bar (90 psi)
• Electrical Requirements:
• 220 V, 60 cy, 1 Ph.

Dimensions and Weight:

• 48" L   32" W  60" H
• 425 lbs.Automatic gluer for hot melt glue and for vinyl glue

  • loader for staples type PV or NP (depending on your needs, interchangeable)
  • automatic device to set staples up to 10 different positions (adjustable)
  • working cycle completely automatic
  • selectors to set from 1 to 4 staples (one behind the other) in each preset position
  • automatic horizontal clamp
  • adjustable fence
  • fence to be set at  45° - 30° - 22,5° - 15°
  • safety shield
  • air-oil filter
  • adjustable glue blade stroke
  • rotating cylinder and glue blade to facilitate cleaning

• Programmable Pneumatic Frame Joiner w/ Automatic Gluer