Cantek JDT65 Manual Dovetailer Machine

From the seller: "Purchased new in January 2021. Used less than 10 hours. Manufacturer's warranty still applies."
Size: 16"

From the Manufacturer

Ideal for drawer production and furniture parts which require high quality dovetail joints.
Max. workpiece size 59" x 16 ½"
Workpieces are clamped by air clamps.
Enclosed-type stand.
Equipped with an indication bar for indicating cutting position.
Tenon width can be micro-metrically adjusted in 2 mm.
Tenon and mortise depth are conveniently adjusted according to the thickness of workpiece.
Equipped with one four-sided template providing four types of pitches between dovetails.
Standard pitch 1", 1 ½", 2" and 2 ½" (Other sizes available on request)
The spindle accommodates 12 mm T.C.T. cutter bit.
Solid Carbide Single Flute Dovetail Bit (CANJDT75-JTCTG1T001) included (1 Only).

Product Details
Manufacturer CANTEK AMERICA, INC.
Part Number CANJDT65
Manufacturer's Part JDT65 (1PH)
Weight 539.000 lbs
Sold in Multiples of 1
Priced By Each
Number of Spindles 1
Maximum Work Piece Size (In.) 59" X 16.5"
Minimum Dovetail Height (In.) .71"
Maximum Side Thickness (In.) .28"
Minimum Front Thickness (In.) .28"
Center to Center Dovetail Spacing (In.) 1", 1.5", 2", 2.5" standard
Motor Power (HP) 1HP
Maximum Front Thickness (In.) 2.36"
Motor Voltage (V.) 230/1/60
Maximum Dovetail Height (In.) .71"
Number of Dovetail Center Lines 4
Minimum Work Piece Size (L x W)(In.) 7.9" X 2.4"
Spindle Speed (RPM) 18500 RPM
Motor Phase Single Phase
Minimum Side Thickness (In.) .28"
Dust Port Outside Diameter (In.) Front 2.5", Rear 4"
Motor Current (Amps) 8
Table Height From Floor (In.) 46.5"