Catalog

Equipment Lot: Fletcher AMP Alfamachine VN144 (U400) Joiner, Vacuseal 4468H Press & Seal 210M Press (used) Item # UE-072722D (North Carolina)

SKU: UE-072722D

Equipment Lot: Fletcher AMP Alfamachine VN144 (U400) Joiner, Vacuseal 4468H Press & Seal 210M Press

Click Here to Contact Us for Pricing

Available Items in Lot:

    • SKU # UE-072722D-1 Fletcher AMP Alfamachine VN144 (U400) Joiner
    • SKU # UE-072722D-2 Wizard 9000 CMC Mat Cutter
    • SKU # UE-072722D-3 D&K Expression (Bienfang / Vacuseal) 4468H Dry Mount Press
    • SKU # UE-072722D-4 Seal Masterpiece (D&K Expression) 210M Mechanical Heat Press
    • SKU # UE-072722D-5 Hoffmann X-20 Manual Dovetail Routing Machine
    • SKU # UE-072722D-6 Fletcher – Terry 3000 Multi Material Cutter
    • SKU # UE-072722D-7 Pistorius EMN-14 Double Miter Saw
    • SKU # UE-072722D-8 Laguna Dust Collector
    • SKU # UE-072722D-9 Metal Flat File
    • SKU # UE-072722D-10 Fletcher – Terry F-7100 40″ Miter Saw Table
    • SKU # UE-072722D-11 Fletcher – Terry 2200 Mat Cutter
    • SKU # UE-072722D-12 Morso Chopper
    • SKU # UE-072722D-13 Tensador II T-155 Canvas Stretcher
    • SKU # UE-072722D-14 ITW AMP Fillet Cutter
    • SKU # UE-072722D-15 Mat Board Holder

From the seller “All machines are in good working condition unless otherwise specified below.”

Machines can be purchased as a lot or individually.  See below for individual item pricing.


UE-072722D-1 Fletcher AMP Alfamachine VN144 (U400) Joiner

***Manufacturer’s Information:

(Formerly labeled AMP VN144 )

The U-400 has been designed for ease of operation and is particularly well suited for joining large frames up to 5 ½” (140mm) in width.

Supplied with a tilting floor stand, the machine can be operated from the front or back and has a single stage pneumatic foot pedal that activates the Horizontal Clamp, securing moulding during the joining process.

After the framer sets the two position stops for measuring the max distance between strokes, a dual function hand lever is then used to position and actuate both the Vertical Mould Holding Clamp and the V-Nail driver inserting V-Nails anywhere along the pre-set stroke distance.

A key operating feature for the U-400 allows the operator to quickly change V-Nail mm size using an interchangeable metal magazine channel. Operator easily accesses the interchangeable channel from the rear of the machine to load the appropriate V-Nail size. This feature eliminates the added purchased cost of plastic nail cartridges.

Frame Joining Capabilities:

Moulding Width: 1/4″ up to 5 1/2″

Moulding Height: 1/4″ up to 3 1/4″

Max Distance Between Vnails: 7 7/8″

Pre-set v-nail position stops: Multiple

Vnail Sizes: 5, 7, 10, 12, 15

Vnail Channel Capacity: 220 vnails/channel

Power Requirements: Compressed Air 4NI at 5 Bar
CE Compliant


UE-072722D-2 Wizard 9000 CMC Mat Cutter

***From the manufacturer’s Website:

CMC Model 9000 highlights:

• Cut speed of up to 20 inches per second

• 4 blade cartridges: 45, 45+, 52 & 90 Degree

• Pen Tool, Debossing Cartridge Package, Vinyl Tool Starter Kit & Box Design Kit

• SwitchBlade™ technology for quick and easy snap-in cartridge changes – no tools required!

• FrameShop™ professional mat design software

9000/S STANDARD PACKAGE INCLUDES:

• CMC Model 9000 (Full Size) or 9000S (Space-Saver™)
Full Size Accommodates 40″x60″ matboard
Space-Saver Accommodates 32’x40″ matboard

CMC Fixed Wall Mount

Computer—Lenovo All-In-One / Windows 10 / 8GB RAM

Wizard FrameShop™ Design & Cut Software License

45º Metal Cartridge w/License + 1 Box (100) Premium Blades

45º+ Metal Cartridge w/License + 1 Box (100) Premium Blades

52º Intricate Cut Cartridge w/License + 1 Box (50) Premium Blades

90º Straight Cut Cartridge w/License + 1 Box (50) Premium Blades

PREMIUM PACKAGE also includes:

Choice of Floor Stand, Retractable or Fixed Wall Mount

Computer Stand

Pen Tool Cartridge w/ License

Debossing Cartridge Package (3 Tip Sizes) w/ License

Box Design & Cutting Kit (Perforation Tool) w/ License
Vinyl Cutting Tool Kit w/ License

CutArt™ Volume 1 Library w/ License


UE-072722D-3 D&K Expression (Bienfang / Vacuseal) 4468H Dry Mount Press

***From the manufacturer:

The Expression® line of vacuum presses from D&K offers guaranteed quality results every time for mounting, laminating, and texturing projects. Vacuum presses allow users to simultaneously process multiple pieces of artwork with varying sizes and thicknesses. The 4468H Vacuum Press is the preferred choice for framing professionals with user-friendly touch pad controls with six factory-installed programs for processing common applications. The 4468H Vacuum Press also includes an Expression® cutting mat that allows you to use the top of the press as a working surface.

Features:

Touch-pad controls.

Easy to read digital display.

Programmable system controller with six preset programs.

End-of-cycle signal.

Space-saving work surface.

Maintenance-free vacuum pump.

Features:

Working Capacity: 44” x 68” x 1”

Dimensions: 72.25” x 56.5” x 6.5”

Net Weight: 205 lbs.

Shipping Weight: 720 lbs.

Power: 230V AC, 15 Amps

Electrical Requirements: 4-wire, single phase NEMA L14-20 plug

Pressure: 13 psi

Floor Stand: Optional – 41 lbs.


UE-072722D-4 Seal Masterpiece (D&K Expression) 210M Mechanical Heat Press

***From the manufacturer:

The Expression® line of vacuum presses from D&K offers guaranteed quality results every time for mounting, laminating, and texturing projects. Vacuum presses allow users to simultaneously process multiple pieces of artwork with varying sizes and thicknesses. The 4468H Vacuum Press is the preferred choice for framing professionals with user-friendly touch pad controls with six factory-installed programs for processing common applications. The 4468H Vacuum Press also includes an Expression® cutting mat that allows you to use the top of the press as a working surface.

Features:

Touch-pad controls.

Easy to read digital display.

Programmable system controller with six preset programs.

End-of-cycle signal.

Space-saving work surface.

Maintenance-free vacuum pump.

Features:

Working Capacity: 44” x 68” x 1”

Dimensions: 72.25” x 56.5” x 6.5”

Net Weight: 205 lbs.

Shipping Weight: 720 lbs.

Power: 230V AC, 15 Amps

Electrical Requirements: 4-wire, single phase NEMA L14-20 plug

Pressure: 13 psi

Floor Stand: Optional – 41 lbs.


UE-072722D-5 Hoffmann X-20 Manual Dovetail Routing Machine

***From the manufacturer:

Overview:
Entry level, manually operated dovetail routing machine to rout a single dovetail keyway with each machining cycle.
For Dovetail Key sizes W-0, W-1, W-2 and W-3

Hoffmann X20 manual dovetail routing machine

Highlights:
The X20 manual dovetail routing machine is a light weight, more portable model with an open base design. This machine does not require a compressed air supply.
This machine is slightly larger than the X18 model, with increased routing height and a table-top mounted on three sided enclosed base.

Operation:
The keyway location is adjusted by positioning the guided center fence plate on the machine table; the keyway length (routing height) is adjusted by setting a height-stop rod to the desired setting.

Routing height adjustment road with scale

Pulling the main lever downward starts the machining cycle:
> Padded hold-down plate secures work-piece and motor is switched on
> Continued pulling advances the router head until pre-set height is reached
> Releasing the lever returns the motor to its home position and shuts off motor
> Padded hold-down plate releases work-piece

Routing parts for a miter joint

With the operator controlling the speed of all machine movements, output is greatly depended on material flow, handling and operator performance.

The supplied router bit is solid tungsten carbide, made to exacting specifications. Depending on the routing depth and the material to be routed, the useable cutter life is approx. 10,000 strokes, often times even more. Every machine is shipped with a tool kit and set-up jig, which allows a router bit change in only minutes.

Standard Features:
Hoffmann Dovetail Routing Machine, model X20, ready for operation, W-2 solid carbide router bit installed, standard 45 degree center fence plate and square stop, toolkit and manual.

Technical data

Power Supply 120 volts – 4.4 Amps
Motor 530 Watt motor
Motor speed 29,000 rpm at idle
Collet size 1/4”
Motor carriage guides 16mm diameter guide rods, precision ground
Operation manual– dual action design
Max. height routing 3” – 76mm / moulding 4” – 101mm
Installed router bit W-2, solid carbide
Available router bits W-0, W-1, W-2 and W-3
Dimensions W/D/H 23 5/8” x 21 1/4” x 30 1/4”
Weight 42 lbs.


UE-072722D-6 Fletcher – Terry 3000 Multi Material Cutter

***From the manufacturer:

The 3000 is the ideal product to make short work of the critical task of preparing your materials for framing. With its simplistic design and user-friendly cutting head, you will see an immediate improvement in accuracy and productivity in the first day of use. Our versatile 3000 unit features a three position cutting turret for glass, acrylics and mat board sizing. Equipped with a patented score and break-out feature, the 3000 unit provides effortless and operator-safe cutting with every use.

Available in 48″ (1219mm) or 60″ (1524mm) vertical cutting capacity.

Manufacturer’s Information:

The Fletcher 3000® Wall Machine has a proven track record of success in frame shops worldwide. With its innovative and patented cutting process, the 3000 provides effortless cutting of the materials that matter to you most. The 3000 has quickly become the standard in picture framing for sizing of matboard, foamboard, glass and plastics; all with equal accuracy and consistency.

Patented glass cutting turret has a ramping feature that allows the lifting of turret device on top edge of glass resulting in a cleaner edge break.

Wall mounted or free-standing

Substrate Cutting Capabilities:

Glass:   Up to 1/4″ (6 mm)

Mirror:  Up to 1/4″ (6 mm)

Acrylic:  Up to 1/4″ (6 mm)

Matboard:  4, 8, 12 ply

Foamboard:  Up to  1/4″ (6 mm)

Technical Specifications:

Vertical Cutting Capacity: 48″

Cutting Head: Rides on high tensile strength steel, hard chrome plated and polished, resulting in smoother gliding action for consistent cutting head performance and longevity.

Vertical Bars: Rails do not bend or flex during the cutting process for straight, accurate cutting over the entire substrate height.

Material Clamping System: Patented lever-type clamping system that secures in place substrate heights up to 48″ to prevent buckling and shifting of material during the cutting process.


UE-072722D-7 Pistorius EMN-14 Double Miter Saw

Serial # 0277344

*** From the Manufacturer & the web

Pistorius EMN14 SaW

Specifications:

Blade Capacity: 14″

Maximum Cutting Height: 5″

Maximum Cutting Width: 6″

Motor HP (2): 2

Electrical: 230/460V(Wired 230)/3PH

Dust Outlet (2): 4″

Variable Speed Pneumatic Feed Down for Saw Blades,

Foot Pedal

(2) 14″ Blades

Side Scrap Discharge Chute

Safety Guards

Approx. Shipping Weight: 1750 Lbs.

Approx. Shipping Dimensions: 48″ L x 48″ W x 59″ H


UE-072722D-8 Laguna Dust Collector

Model CFLU:1

Serial # 01633078

1.5 HP

Voltage 110V / 220V

Phase 1

60 Hz


UE-072722D-9 Metal Flat File


UE-072722D-10 Fletcher – Terry F-7100 40″ Miter Saw Table


UE-072722D-11 Fletcher – Terry 2200 Mat Cutter

*** From the manufacturer

Fletcher-Terry 2200 Mat Cutter

Professional level mat or mount board cutter for creating bevels and producing V-Grooves as decorative features and finishes in matboard up to 4-ply. Features a dual cutting feature for matboard specialty cutting or a 90° cutting feature for sizing matboard or cutting of foamboard up to 1/2” (13mm). Available machine sizes, 48” (1.2m) or 60” (1.5m).

Besides being used at many global custom frame shops, the 2200 is a great investment and business expansion tool for sign companies, photo studios, boutique shops, quick printers, and arts & crafts shops.

Our Fletcher 2200 mat cutter provides specialty cutting for creating bevels and producing v-grooves in mat board used for picture framing and art / graphics retail matting.

Available in 48″or 60″ cutting capacity.

Product Description

Performance Features:

Manual mat cutting for sizing cuts, cutting bevels and producing v-grooves.

Cuts 4-ply mat board.

Straight line cutting of foam board up to 1/2″ (13 mm).

Maximum material cutting thickness: 1/2″ (13mm), 90 degrees cut only.

Available machine sizes: 48″ (1.2m) and 60″ (1.5m).


UE-072722D-12 Morso Chopper

*** From the manufacturer:

Morso Model F Mitering Machine (Price new is $4,000 USD / about $5,100 CAD)

Morso Model F mitring machine cuts double mitre at 45° and single mitre up to 90°. Tenon, mortise joints, and a wide variety of angled cuts can also be made.

When using the Morso F, you will have no dust compared to a saw. Also, the waste of your moulding will be minimized as Morso F cuts double mitres very close, ( less than one mm waste of moulding ).

The mitre saw cannot do the mitres as close, and therefore the waste by using a saw, will always be minimum one centimetre.

One centimetre of waste does not sound of much, but if a calculation is done of 100 cuts a day, it actually turns out that the waste over a year is 260 meters waste of moulding…. ( That is only with 100 cuts a day…)

Morso F leaves the cut surface of the wood perfectly smooth and accurate, requiring no further preparation before joining. The horizontal movement of the knife block is stepwise adjustable. The sliding longitudinal stop and measuring scale ensure accurate repeat work.

The special lever system of the machine ensure a very easy operation. Twin return springs automatically bring the knives back to starting position.

Morso F is delivered with safety guard, waste chute, sliding longitudinal stop, measuring scale, adjustable fences ( 45° – 90° ), and adjustable rebate supports.

Morso F is manually operated with a foot pedal – needs no compressor or electricity and can therefore be operated anywhere.

Technical data for
Morso Model F Mitring Machine
Double mitre 45°
Single mitre up to 90°
Cutting width, max. 100 mm
Cutting height, max. 160 mm
Square cutting 65/65 mm
Measuring scale up to 1,500 mm
Net weight 90 kg


UE-072722D-13 Tensador II T-155 Canvas Stretcher

*** Manufacturer’s Information:

Tensador II T-155G+  (Replacement price: $3,525)

Tensador II G+ is a simple effective devise that insures proper and uniform tension of canvas. Tensador II G+ is designed to stretch canvas from 8″ x 8″ through 60″ x 60″.  Pneumatic air filter controller and foot activated safety pedal assures safe and reliable operation.

Stretching canvas has never been so quick and easy. Tensador II G+ is designed for stretching giclee canvas, canvas transfers and oil paintings. The, unique clamping mechanism firmly grips canvas without harmful piercing.

The unique gallery wrap on the Tensador II G+ provides access to the back side of the stretcher bar. This operation requires a staple gun with a long nose to reach the back side of the bar. Gallery wrap or stapling on the back side of the stretcher requires 1 ½” for canvas past the back side of the stretcher bar to staple on the side 3/8” is required. . The Tensador II G+ can accommodate most any commercial stretcher bar size from ½” – 2 ½” thick.

The Tensador II G+ solves the wide range of finishing requirements, square or tapered corners or supported or open backs.

The canvas image is visible during stretching operation assuring accurate location of image and reduced reject or re-makes.

A small footprint of Tensador II G+ easily adapts to current plant finishing areas and conserved table space for final finishing.

Minimal adjustments are required for canvas size changes resulting in higher production when stretching multiple size images or bar sizes. Greater machine versatility and low operator training cost.

Pneumatic operation is reliable and requires no electrical needs. Tensador II G+ uses plant or dedicated air systems. Silent air systems are available. Built in the USA, you always have direct conversation with the manufacture, to address any operation or parts concerns. Sold throughout the world and shipped by UPS or Fedex for quick economical delivery.


UE-072722D-14 ITW AMP Filler Cutter


UE-072722D-15 Mat Board Holder


Customers can pick these items up in North Carolina or have them shipped for an additional fee.


*** Although we strive for accuracy, some specifications are provided to us by seller. It is a good idea to double check specifications by manufacturing company for possible errors of information. Check with manufacturer for any difference between the machine being sold and what is stated in the manufacturer’s website.  Feel free to call us if you have further questions before purchasing.
Catalog Item #

UE-072722D

Condition of Item

Used
All used items are sold “As Is”. There are no implied warranties or guarantees. Statement of condition is provided to us by the seller. Although we strive to obtain the best information from the seller, AIM is not responsible for inaccuracies provided to us by seller. It is the responsibility of the buyer to inspect machinery; crosscheck with seller or manufacturer regarding descriptions and specifications that appear in this listing.

Date of Initial Listing

July 27, 2022

Location

North Carolina

Reviews

There are no reviews yet.

Be the first to review “Equipment Lot: Fletcher AMP Alfamachine VN144 (U400) Joiner, Vacuseal 4468H Press & Seal 210M Press (used) Item # UE-072722D (North Carolina)”

Your email address will not be published.