Catalog

Equipment Lot: Fletcher Valiani CMC Mat Cutter, Fletcher 3000 Cutter & Supplies (Used) Item # UE-082021A (Nebraska)

SKU: UE-082021A

Equipment Lot: Fletcher Valiani CMC Mat Cutter, Fletcher 3000 Cutter & Supplies

Click Here to Contact Us for Pricing

Available Items in Lot:

    • SKU # UE-082021A-1 Fletcher Valiani Mat Pro 150 CMC Mat Cutter $ 1,750

Sold Items in Lot:

    • SKU # UE-082021A-2 Fletcher – Terry 3000 Multi Material Cutter
    • SKU # UE-082021A-3 Thumbnail Master / Router

From the seller: “All equipment in this lot are in good working condition unless otherwise specified below.”

Machines can be purchased as a lot or individually.  See below for individual item pricing.


UE-082021A-1 Fletcher Valiani Mat Pro 150 CMC Mat Cutter $ 1,750

***From the manufacturer:

Valiani Mat Pro-i 150 Manual Pneumatic Mat Cutter

The MatPro-i is a durable and proven mat cutting machine that delivers exceptional quality, versatility and value. The MatPro pneumatic mat cutter is a unique manual design that incorporates state-of-the-art features, increasing your range, minimizing set-up, improving productivity, and eliminating common problems. With the Mat Pro-i, the pneumatic clamping feature holds the matboard firmly in place and you no longer have to rotate your mat in order to cut your openings. The pneumatic cutting head provides precision and maximum control and smooth blade insertion eliminates hooking and increases accuracy.

Fast and simple installation
This user-friendly machine is quickly and simply installed. Set-up is accomplished with basic tools and no more than an hour is required to be fully operational. You can be an expert in no time at all!

Machine Feautures
An ergonomic grip handle reduces strain on production runs while providing maximum comfort. Use the two buttons located on the grip handle on the left side to lower the head and insert the blade. Adjust blade depth with knob on the cutting head for different mat board thickness and for V-grooves. No need to change blade magazine. Patented magnetic stops ensure smooth straight lines and provide instant offset for repetitive cuts, and allow quick and simple cutting of pre-assembled multi-layer mats. The new measuring scale system allows you to easily cut small to large openings and multi mat openings helping you to increase production. The MatPro end trimmer provides the ability to square and size matboard on one machine. This accessory will cut all matboard and foamboard materials up to an 8-ply thickness. Optional end trimmers are available for both the Mat Pro-i 120 and the Mat Pro-150. The optional oval/circle cutter attachment easily fits either the Mat Pro-i 120 or 150. A compact and portable mat cutting device, the oval/circle cutter is a convenient time saving addition to the Mat Pro-i product.

Pneumatic head

Pneumatic cutting head provides precision and maximum control. Smooth manual rotation of the cutting head can be achieved for corners. The cutting head can be adjusted for a range of materials and thicknesses.

Measuring stops – Mat clamping
Patented rotating measuring stops ensure smooth straight lines and provide instant offset for repetitive cuts and allow quick and simple cutting of pre-assembled multi-layer mats and V-groove.

Pneumatic clamps hold the mat board firmly in place and therefore you will no longer need to rotate them to cut the openings.

Head and cutting blades
The machine is equipped with Valiani standard bevel cutting head. Since 2008 4 Interchangeable Heads are available also for this machine.

The quality and performance of the blade and of the cutting head is essential to any mat board cutting machine. Mat Pro-i blades are produced from the finest steel and sharpened to a precise controlled edge. The blades are inexpensive and will cut from 80 to 120 average openings, depending on the quality and size of the mat. Changing the blade is fast and simple and can be done under a minute.


UE-082021A-2 Fletcher – Terry 3000 Multi Material Cutter $ 750 (Sold)

From the seller “Includes manual.  It appears to need a new glass blade.”

*** From the manufacturer 

Fletcher-Terry 3000 Glass Cutter

The 3000 is the ideal product to make short work of the critical task of preparing your materials for framing. With its simplistic design and user-friendly cutting head, you will see an immediate improvement in accuracy and productivity in the first day of use. Our versatile 3000 unit features a three position cutting turret for glass, acrylics and mat board sizing. Equipped with a patented score and break-out feature, the 3000 unit provides effortless and operator-safe cutting with every use.

60″ (1524mm) vertical cutting capacity.

Manufacturer’s Information:

The Fletcher 3000® Wall Machine has a proven track record of success in frame shops worldwide. With its innovative and patented cutting process, the 3000 provides effortless cutting of the materials that matter to you most. The 3000 has quickly become the standard in picture framing for sizing of matboard, foamboard,glass and plastics; all with equal accuracy and consistency.

Patented glass cutting turret has a ramping feature that allows the lifting of turret device on top edge of glass resulting in a cleaner edge break.

Wall mounted or free-standing

Substrate Cutting Capabilities:

Glass:   Up to 1/4″ (6 mm)

Mirror:  Up to 1/4″ (6 mm)

Acrylic:  Up to 1/4″ (6 mm)

Matboard:  4, 8, 12 ply

Foamboard:  Up to  1/4″ (6 mm)

Technical Specifications:

Vertical Cutting Capacity: 60″ (1.52m)

Cutting Head: Rides on high tensile strength steel, hard chrome plated and polished, resulting in smoother gliding action for consistent cutting head performance and longevity.

Vertical Bars: Rails do not bend or flex during the cutting process for straight, accurate cutting over the entire substrate height.

Material Clamping System: Patented lever-type clamping system that secures in place substrate heights up to 60″ (152cm) to prevent buckling and shifting of material during the cutting process.

Machine Dimensions:

Height: 72″ (183 cm)

Width: 80″ (203 cm)

Depth: 11.64″ (30 cm)

Weight:  70 lbs. / 32 kg

Cut Capacity: 60″ (152 cm)

Needed Wall Space: 36.38 sq. ft.

Shipping Weight: 110 lbs./ 49 kg


UE-082021A-3 Thumbnail Master / Router $ 450 (Sold)

*** Info from the Manufacturer

CH Thumbnailer Model: TN1000M

Used for joining mitered moulding like picture frames

Includes the following inserts: 3/8″ (100 count bag), 5/8″ (100 count bag), 15/16″ (100 count bag)

Includes: Set of motor wrenches

Includes: Router bit

Description:

The C&H Thumbnail Master is a popular thumbnail router with framing businesses, large and small. It is very versatile and easy to use. The Thumbnail Master joiner provides routing of thumbnail channels at 6 depth capabilities, all easily set on an easy-to-read dial. It can do thumbnailing of mouldings up to 1 7/8″ deep and has a changeable clamping height which can hold mouldings from 1/2″ to 3 3/4″ tall. It has an easy grip guide handle and ratcheted bit handle for simple adjustment of the routing bit.

The Thumbnail Master Frame Joining System utilizes the strongest, most durable and dependable inserts in three sizes. These inserts are tapered, drawing the face of the moulding together when joined with glue. This allows for depths of up to 1 7/8”

Features include:

New shadowbox capabilities

Easy-grip handle

Improved, stop system with 6 depth capabilities on one easy-to-read dial

Clamping height of up to 3 ¾”for increased versatility

Ratchet handle for easy bit adjustment

Height adjustment handle

Specifications:

Mount: Tabletop
Weight: 26 lbs. (UPS shippable)
Joining Inserts: 3 sizes: 3/8”, 5/8”, and 15/16”
Moulding widths: ½” – 3 ¾”
Power Requirements: 4 amp, 115v
Vacuum: Built-in provision/hook-up
Accessories: Bit (Steel or carbide)
Air requirement: None


UE-082021A-4  Quick-Shield Shrink Wrap Machine $ 250

Model # SS-40SS

Emerald Film Systems

Portable Shrink Wrap System

Comes with a holder for the shrink wrap rolls and one partial roll of shrink wrap.


Customers can pick up this machine in Nebraska or shipped for an additional fee.

 

***  It is the buyer’s responsibility to check with manufacturer for any difference between the machine being sold and what is stated in the manufacturer’s website.  Although we strive for accurate information, all equipment is sold “As Is”. 

Catalog Item #

UE-082021A

Condition of Item

Used
All used items are sold “As Is”. There are no implied warranties or guarantees. Statement of condition is provided to us by the seller. Although we strive to obtain the best information from the seller, AIM is not responsible for inaccuracies provided to us by seller. It is the responsibility of the buyer to inspect machinery; crosscheck with seller or manufacturer regarding descriptions and specifications that appear in this listing.

Date of Initial Listing

August 20, 2021

Location

Nebraska

Reviews

There are no reviews yet.

Be the first to review “Equipment Lot: Fletcher Valiani CMC Mat Cutter, Fletcher 3000 Cutter & Supplies (Used) Item # UE-082021A (Nebraska)”

Your email address will not be published.