Pistorius MN-200 Saw, Jyden Chopper, Smooth Mount 40" Pouch Board Roll Laminator

UE-011221B-1  Fletcher AMP MN-355 Double Miter Saw  $ 9,500

(SOLD)

Includes measuring table & stop

***Manufacturer's Information:

AMP's MN-355 is a Heavy Duty Double Mitre Saw designed to cut 45° mitre joints in Wood, MDF, Plastics and Aluminum Materials. The MN-355 can cut materials up to 6" wide and 4" high. The heavy duty design is achieved using precision machined cast components for saw head, pivot assembly and motor base.

All portions of the saw base are fabricated with a heavy gauge steel and normalized, a metallurgical process to ensure all stress is removed before machining and drilling for saw cutting heads and guide fence.

The cutting process is foot pedal actuated for production output speed, and minimizes reliance on operator for consistent, accurate and repeatable cutting.

The MN-355 Saw System consists of a 1.5Hp motor, and includes:  vertical clamps, 96" manual measuring table and a set of Tenryu Saw Blades.

- Production Capacity – Up to 800 Cuts/Hour
- Single Motion Cycle – (2) Cuts per Cycle
- Machine Weight and Dimensions
- Saw Dimensions: 48"L x 24"W x 54"H / Shipping Container Dimensions: 65" x 45" x 70"
- 96" Manual Measuring Table / Shipping Container Dimensions: 120"L x 12"W x 12"H (saw that appears in photo show the optional programmable gauge and optional infeed table)
- Saw Weight: 850 lbs
- Manual Measuring Table Weight: 235 lbs
- Link for Manual

UE-011221B-2 Morso Foot Operated Chopper  $ 800

(SOLD)

Includes extra set of blades and measuring table

***Manufacturer's Information:

Morso Model F Mitering Machine (Price new is $3,500 USD / about $4,500 CAD)

Morso Model F mitring machine cuts double mitre at 45° and single mitre up to 90°. Tenon, mortise joints, and a wide variety of angled cuts can also be made.

When using the Morso F, you will have no dust compared to a saw. Also, the waste of your moulding will be minimized as Morso F cuts double mitres very close, ( less than one mm waste of moulding ).

The mitre saw cannot do the mitres as close, and therefore the waste by using a saw, will always be minimum one centimetre.

One centimetre of waste does not sound of much, but if a calculation is done of 100 cuts a day, it actually turns out that the waste over a year is 260 meters waste of moulding.... ( That is only with 100 cuts a day...)

Morso F leaves the cut surface of the wood perfectly smooth and accurate, requiring no further preparation before joining. The horizontal movement of the knife block is stepwise adjustable. The sliding longitudinal stop and measuring scale ensure accurate repeat work.

The special lever system of the machine ensure a very easy operation. Twin return springs automatically bring the knives back to starting position.

Morso F is delivered with safety guard, waste chute, sliding longitudinal stop, measuring scale, adjustable fences ( 45° - 90° ), and adjustable rebate supports.
Morso F is manually operated with a foot pedal - needs no compressor or electricity and can therefore be operated anywhere.

Technical data for Morso Model F Mitring Machine:
- Double mitre: 45°
- Single mitre up to: 90°
- Cutting width, max.: 100 mm
- Cutting height, max.: 160 mm
- Square cutting: 65/65 mm
- Measuring scale up to: 1,500 mm
- Net weight: 90 kg

UE-011221B-3 Jyden Chopper  $ 600

(SOLD)

Please note: Foot Pedal needs repair.

***Manufacturer's Information:

Jyden Chopper User Manual

UE-011221B-4 Smooth Mount Pouch Board Roll Laminator  $ 750

(SOLD)

Size: 40"
Model PBLM 40
Includes operation manual.

UE-011221B-5 Pistorius MN-200 Double Miter Saw

(SOLD)

From the Seller: "The saw works but I do not have a way to put power to it. Sold 'As Is'"

Includes measuring table and air stop

***Manufacturer's Information:

…for cutting wood, aluminum, plastics and fiberglass

Specifications:

- Blade Capacity: 12"
- Blade Arbors: 5/8"
- Maximum Cutting Height: 2-5/8"
- Maximum Cutting Width: 3-3/8"
- Motor HP: 1.5 (Each)
- Electrical: 220/440V(Wired 220)/3PH2-5/8"
- Max. height & 3-5/16" max. width cap
- (2) 1.5HP, 230/460V, 3,450RPM Motors
- 12" blade diameter capacity
- 5/8" diameter belt driven saw arbors
- Non-staggered blade movement – not for notching, only approx. 7" of travel is necessary to complete the stroke of the saw blades

Simultaneously cuts a left and right 45 degree miter with each cycle of the machine thus wasting little material. Leaves hands free to hold the material. Easy to regulate the cutting speed. The counterbalanced saw heads return automatically. The saw blades extend beyond the fence line when cycling, cutting completely through the material. Foot pedal operated, actuated by air. Scrap discharges to the bottom of the machine. Air filter, regulator, lubricator, Magnetic push button starters

TigerStop

Push It, Pull It, Position It

TigerStop® is an automated material pusher and stop gauge that will turn your existing machine into a lean manufacturing asset. Take your operations to a whole new level with the product that started it all.

Measuring and setting manual stops takes time, requires a great deal of skill, and even with the best operator you will still get misscut parts requiring costly rework. TigerStop was designed to solve these problems.

Adding a TigerStop means increasing speed and accuracy with a machine that is easy to operate.

Features
- Jog Mode
- Calculator Mode
- Preset Function
- Metric, Decimal and Fraction Inches
- Part List Interface, Downloading Software
- Standard Interconnect Kit (knows when your saw is cycling)
- Four Types of Parts Lists
- Set Point
- Pusher
- Pattern Part List
- Pull List
- Tiger Stop

UE011221B-6 Inmes IM300P Double Miter Saw $3,000

(SOLD)

From the Seller: "We use the saw every day, but they are two hiccups. I imagine an electrician could probably fix the problems. Sometimes the pneumatic sticks. We reset the machine by turning it on and off and that solves the problem, The right blade sometimes doesn't start. If that happens, we turn it off, spins the blade, turn on, and that solves the problem."

Video of Machine in Operation

***Manufacturer's Information:

The IM-300P AL was developed for cutting aluminum profiles with precision. The two saw blades are fixed at 45° angles and vertically move up and down assuring a maximum width 3-3/16" and height 3-316" for high productivity.

Characteristics
- The machine comes with: IM-300P AL, right roller table extension with 2600mm, saw blade, clamping system, pneumatic lubricator device;
- Induction motor (single phase or three phase);
- Front access through panel with easy access for changing the saw blades;
- Simultaneous actions of the saw blades;
- Adjustable speed of blades descent;
- Pivot mechanism with conical bearings on cutting arms;
- Right and left calibrated scale;
- Sliding moulding stop for setting lengths of cuts;
- Powdered painting providing better finishing to the equipment and longer durability.