Equipment Lot: SCMI Sigma 65 Beam Saw, Brevetti Maxi Miter Saw, Orca 1 Laminator (used) Item # UE-060920C (North Carolina)

SKU: UE-060920C

Equipment Lot: SCMI Sigma 65 Beam Saw, Brevetti Maxi Miter Saw, Orca 1 Laminator

Click Here to Contact Us for Pricing

Available Items in Lot:

  • SKU # UE-060920C-1 SCMI Sigma 65 Horizontal Beam CNC Panel Saw
  • SKU # UE-060920C-3 GBC Pro Tech Orca I Wide Format Laminator

Sold Items in Lot:

  • SKU # UE-060920C-2 Brevetti Prisma Maxi Miter Saw

From the seller “All machines are in good working order unless otherwise specified below. “

Machines can be purchased as a lot or individually.  See below for individual item pricing.

UE-060920C-1 SCMI Sigma 65 Horizontal Beam CNC Panel Saw  Call for pricing
From the seller: ” This used SCM SIGMA 65 BEAM SAW was manufactured in April 2001. Saw was used 1 hour a day.  Runs like new. Service / condition wise, it is equivalent to a 2011 / Replaced controller / PLC & PLC Card 2014.All parts are factory authorized and purchased through SCM parts. A new carriage drive chain was installed about 2 years ago.
Includes:  3 sets of blades.  4,000 lb Front Lift / Load  Table.  KUFU Seco 10Hp 4 x 60 gallon bags dust collector / collection system. Kufu motor have been recently serviced and had bearings replaced. Lift table has 4000 lbs lift capacity
*** From the manufacturer:

SCMI SIGMA 65 Horizontal Beam CNC Panel Saw.

TECHNICAL SPECIFICATIONS Main motor 10hp Cut length 10’ 6” Cut height 2.25” 230 – 440 v 60 hz 3 5ft. air tables / one with fixed fence. 6 gripper clamps that are adjustable 2 carriage feed speeds Full rear protection wall. THK guides on rise and fall of blades Side alignment “Cutty” on board optimization software 3 sets of blades

UE-060920C-2 Brevetti Prisma Maxi Miter Saw  SOLD
Includes an extra set of blades
From the seller “Last used 6-9-20. Saw is in good working order”
Manufactured in 2003
Power: Single Phase, 220V

***From the Manufacturer

Brevetti Prisma Maxi

The PRISMA MAXI is a slightly larger version of the PRISMA CE. It provides greater flexibility by accommodating larger moldings while offering the same precise quality cuts. It also utilizes design and technology to reduce vibrations felt by the operator through its unique horizontal cutting stroke.


Functional, attractive double blade miter saw well suited to low to medium volume custom frame shop whose market demands larger moldings for its frames
Cuts molding up to 7″ wide by 3 1/4″ high
Right and left moulding support arms with attached measure marks
Sliding stop to facilitate multiple accurate, equal length cuts
Mechanical clamps to hold molding secure during cutting stroke to help maintain smooth and accurate cuts in the moulding and reduce waste
Includes two high quality 275 mm, 80 tooth blades from Tenryu, manufacturer of industrial saw blades for 100 years. (100 tooth blades optional)

(2) 275mm (10-13/16″) saw blades/ bore 32mm(1-1/4″)/ 80 tooth (100 tooth available)
(2) 1.5HP 220V/60Hz single phase motors
(2) 52 1/2″ molding support arms
(2) mechanical hold down clamps for moulding
78 3/4″ measuring scale
Cuts molding up to 7″ wide by 3 1/4″ high
Right sliding stop for repeatable cuts
Blade Rotation speed – 3200 RPM
Dimensions – 48″ (w) x 27 9/16″ (d) x 44 1/16″ (h)
Weight 363 lbs.

UE-060920C-3  GBC Pro Tech Orca I Wide Format Laminator  $ Call for pricing
From the seller: “Rollers are in excellent condition. Laminator is in good working order”
Includes an spare heating element

*** From a manufacturer / distributor

GBC Pro-Tech ORCA I is a powerful machine that is designed to mount, laminate and encapsulate.


Model Number: ORCA I

Electrical: 220-240 VAC, 50/60 Hz, 55A, single phase 3 wire

Laminating Rolls: 61″ (155 cm) roll face with high release surface, upper and lower rolls internally heated

Laminating Opening: 1.5″ (3.8 cm) maximum opening

Laminating Material: Uses heat activated and pressure-sensitive materials. 0 – 55″ (0 – 140 cm) wide on a 3″ (7.6 cm) ID core, 10″ (25.4 cm) maximum diameter

Laminating Speeds: 0 to 14 fmp (0 to 4.3 mpm) with variable speed, reversible action, start and stop controlled either through the instrument panel or with the footswitch

Encapsulating Features: Pull rolls and cooling fans for uniform flat cooling

Safety Features:

Photoelectric eyes prevent laminating roll movement if objects are in the nip area

All electrical and moving mechanical parts are located in bolted cabinets

2 emergency stop buttons

2 emergency kick cables

Standard Features: Outfeed Slitters

These items can be picked up in North Carolina or shipped for an additional fee.

***  It is the buyer’s responsibility to check with manufacturer for any difference between the machine being sold and what is stated in the manufacturer’s website.  Although we strive for accurate information, all equipment is sold “As Is”. 
Catalog Item #


Condition of Item

All used items are sold “As Is”. There are no implied warranties or guarantees. Statement of condition is provided to us by the seller. Although we strive to obtain the best information from the seller, AIM is not responsible for inaccuracies provided to us by seller. It is the responsibility of the buyer to inspect machinery; crosscheck with seller or manufacturer regarding descriptions and specifications that appear in this listing.

Date of Initial Listing

June 9, 2020


North Carolina




There are no reviews yet.

Be the first to review “Equipment Lot: SCMI Sigma 65 Beam Saw, Brevetti Maxi Miter Saw, Orca 1 Laminator (used) Item # UE-060920C (North Carolina)”

Your email address will not be published.