Used
Equipment Lot: SCMI 5 Head Moulder & Weinig U17A 7 Head Feed Through Moulder w/ Hopper Feed
SKU: UE-062921E
Manufacturer: Equipment Lot
Date listed: June 29, 2021
Equipment Lot: SCMI 5 Head Moulder & Weinig U17A 7 Head Feed Through Moulder w/ Hopper Feed
Available Items in Lot:
- SKU # UE-062921E-1 SCMI 5 Head Moulder $9,500
Sold Items in Lot:
- SKU # UE-062921E-2 Weinig U17A 7 Head Feed Through Moulder w/ Hopper Feed (SOLD)
From the Seller: "All equipment in this lot are in good working condition unless otherwise specified below."
*Items in this lot can be purchased individually or as a grouping.
About this Item
Features & Specifications
UE-062921E-1 SCMI 5 Head Moulder $9,500
Model: P170
Serial: AA-160284
Hours: 42230
Electric: 480 Volt, 170 AMP, 60HZ
Working Capacity: 6-3/4" x 4-3/4"
Head Sequence:
1. Bottom Groover/Surface Planer - 8.9HP (6.6kw)
2. Right Side - 8.9HP( 6.6kw)
3. Left Side - 8.9HP (6.6kw)
4. Top - 17.5HP (13kw)
5. Universal - 12HP (9kw)
- 5 Spindles: 1-1/2" diameter with cutter-head speed of 6,000 RPM
- Feed: Chainless feed drive motor - 2.4HP (1.8kw) 18 to 118 RPM
- Motorized raise-and-lower of overhead feed beam: Lift unit motor 0.87HP (.65kw)
- Equipped with 67" in-feed table
- Cutter-heads for planing (comes with extra heads)
- The machine is complete with wheels and accessories kit
Dimensions:
- Length: 174"
- Width: 65"
- Height: 67"
- Weight: 8,000lbs
(Note on feed box- Replace 3rd feed shaft 65847 hours)
UE-062921E-2 Weinig U17A 7 Head Feed Through Moulder w/ Hopper Feed $15,000
(SOLD)
Serial: 6972
Year: 1981
Electric: The machine itself is dual voltage 230/460 so are all the motors. The label from the factory says it was wired 230 voltage but the control transfer is physically wired for 460 so the machine has been converted to 460. The overloads on it confirms that, so does the delta configuration on the motors.
Working Capacity: 6-3/4" x 4-3/4"
Head Sequence:
1. Bottom Groover/Surface Planer - 5HP (4kw)
2. 1st Right Side - 5HP( 4kw)
3. 2st Right Side - 7HP( 5.5kw)
4. Left Side - 10HP (7.5kw)
5. Top - 10HP (7.5kw)
6. Bottom - 7HP (5.5kw)
7. Universal - 5HP (4kw)
- 7 Spindles: 1-1/2" diameter with cutter-head speed of 6,000 RPM
- Feed: Chainless feed drive motor - 5HP (4kw) 18 to 118 RPM
- Motorized raise-and-lower of overhead feed beam: Lift unit motor 0.5HP (.37kw)
- Equipped with 78" in-feed table with manual table lubrication pump
- Device for processing short pieces
- No. 15 Cutter-heads for planing (comes with extra heads)
- The machine is complete with wheels and accessories kit
- Space rings for shaft
Dimensions:
- Length: 190"
- Width: 62"
- Height: 60"
- Weight: 10,000lbs
***Concerning "Used" Items: Although we strive for accuracy, some specifications are provided to us by the Seller. Cross-check with manufacturer for any difference between the machine being sold and what is stated in the manufacturer's information. Descriptions of condition of the equipment are not warranties. Descriptions are intended only as a courtesy and their accuracy is not guaranteed. Buyer inspection encouraged. There are no warranties or guarantees implied unless otherwise stated. All items are sold "As Is, Where Is, and With All Faults." No guarantee is made as to fitness for a particular purpose, implied or otherwise. Feel free to contact us if you have further questions before purchasing.
Pricing & Shipping
Interested in the product? Fill out the form or call us at 330-405-9421 for pricing and other information.
Product is located in Texas. Customers can pick the machine up or have it shipped for an additional fee.
Can't Find the Equipment You Need?
We're constantly getting new listings. Let us know what you're looking for and we'll notify you when the equipment is available.
Turn Your Old Equipment Into Cash
No longer need your equipment? We can help.