Picture Framing Equipment Lot: Mitre Mite VN2+1 Vnailer, Morso Chopper & Thumbnailer

Machine and supplies can be purchased separately.
Equipment that you need to start a production picture framing business. Great for an additional location or new business venture!
From the seller: "All equipment in this lot are in good working condition unless specified differently."
Seller cannot pack. Pick up only.

Machines can be purchased individually. See below for pricing.

UE-061121E-1   ITW AMP Mitre Mite VN2+1 Joiner (Fletcher U300) / Vnailer / Underpinner  $ 800 USD
Includes some vnails

Manufacturer's Information:
ITW AMP Mitre Mite VN2+1 (Fletcher U300) Joiner / Vnailer / Underpinner
The Mitre-Mite VN 2+1 is a bench top frame assembly machine and our most popular model with the Custom Framer. It is compact and well constructed, built for many years of trouble free operation. With this machine, the Framer sets the front and back stops for V-Nail insertion. The frame is then moved across the nail head and V-Nails can be driven or stacked anywhere along the frame joint. Other features include a pneumatic load / feed system to eliminate jams, "soft clamp" pneumatics for damage free joints, and a "quick change" hold down to fit most profiles.
Specifications:
Machine Size: Width/12" , Length/19" , Height/14" , Weight/75lbs
Power Source: Pneumatic
Framing Capability: Frame Width 3/8" to 5" / Frame Height 1/4" to 5 1/4"
Miter Mite V-Nail sizes: 3,5,7,10,12,15 mm

UE-061121E-2 Morso Chopper $ 800 USD
From the seller: "Does not come with any additional blades. Just the set on the machine."

From the manufacturer:
Morso Model F Mitering Machine (Price new is $4,000 USD / about $5,100 CAD)
Morso Model F mitring machine cuts double mitre at 45° and single mitre up to 90°. Tenon, mortise joints, and a wide variety of angled cuts can also be made.
When using the Morso F, you will have no dust compared to a saw. Also, the waste of your moulding will be minimized as Morso F cuts double mitres very close, ( less than one mm waste of moulding ).
The mitre saw cannot do the mitres as close, and therefore the waste by using a saw, will always be minimum one centimetre.
One centimetre of waste does not sound of much, but if a calculation is done of 100 cuts a day, it actually turns out that the waste over a year is 260 meters waste of moulding…. ( That is only with 100 cuts a day…)
Morso F leaves the cut surface of the wood perfectly smooth and accurate, requiring no further preparation before joining. The horizontal movement of the knife block is stepwise adjustable. The sliding longitudinal stop and measuring scale ensure accurate repeat work.
The special lever system of the machine ensure a very easy operation. Twin return springs automatically bring the knives back to starting position.
Morso F is delivered with safety guard, waste chute, sliding longitudinal stop, measuring scale, adjustable fences ( 45° – 90° ), and adjustable rebate supports.
Morso F is manually operated with a foot pedal – needs no compressor or electricity and can therefore be operated anywhere.

Technical data for Morso Model F Mitring Machine
Double mitre: 45°
Single mitre up to: 90°
Cutting width, max.: 100 mm
Cutting height, max.: 160 mm
Square cutting: 65/65 mm
Measuring scale up to: 1,500 mm
Net weight: 90 kg

UE-061121E-3 C&H Thumbnail Master Router / Joiner $ 500 USD
Includes a supply of inserts
C&H Thumbnail Master Router / Joiner

From The Manufacturer
CH Thumbnailer Model: TN1000M

Used for joining mitered moulding like picture frames

Includes the following inserts: 3/8" (100 count bag), 5/8" (100 count bag), 15/16" (100 count bag)

Includes: Set of motor wrenches

Includes: Router bit

Price   $1,290 + shipping

Description:
The C&H Thumbnail Master is a popular thumbnail router with framing businesses, large and small. It is very versatile and easy to use. The Thumbnail Master joiner provides routing of thumbnail channels at 6 depth capabilities, all easily set on an easy-to-read dial. It can do thumbnailing of mouldings up to 1 7/8" deep and has a changeable clamping height which can hold mouldings from 1/2" to 3 3/4" tall. It has an easy grip guide handle and ratcheted bit handle for simple adjustment of the routing bit.

The Thumbnail Master Frame Joining System utilizes the strongest, most durable and dependable inserts in three sizes. These inserts are tapered, drawing the face of the moulding together when joined with glue. This allows for depths of up to 1 7/8"

Features include:

• New shadowbox capabilities
• Easy-grip handle
• Improved, stop system with 6 depth capabilities on one easy-to-read dial
• Clamping height of up to 3 ¾"for increased versatility
• Ratchet handle for easy bit adjustment
• Height adjustment handle
• Specifications:

Mount: Tabletop
Weight: 26 lbs. (UPS shippable)
Joining Inserts: 3 sizes: 3/8", 5/8", and 15/16"
Moulding widths: ½" – 3 ¾"
Power Requirements: 4 amp, 115v
Vacuum: Built-in provision/hook-up
Accessories: Bit (Steel or carbide)