Picture Framing Equipment Lot: Morso Chopper, Seal Masterpiece 500T-X Dry Mount Press, Fletcher 3000 Cutter & Supplies

UE-032122B-1 Morso Chopper w/ Measuring Table & Stop

(SOLD)

Includes 2 extra sets of blades

***Manufacturer's Information:

Morso Model F Mitering Machine (Price new is $4,000 USD / about $5,100 CAD)

Morso Model F mitring machine cuts double mitre at 45 degrees and single mitre up to 90 degrees. Tenon, mortise joints, and a wide variety of angled cuts can also be made.

When using the Morso F, you will have no dust compared to a saw. Also, the waste of your moulding will be minimized as Morso F cuts double mitres very close, ( less than one mm waste of moulding ).

The mitre saw cannot do the mitres as close, and therefore the waste by using a saw, will always be minimum one centimetre.

One centimetre of waste does not sound of much, but if a calculation is done of 100 cuts a day, it actually turns out that the waste over a year is 260 meters waste of moulding. ( That is only with 100 cuts a day!)

Morso F leaves the cut surface of the wood perfectly smooth and accurate, requiring no further preparation before joining. The horizontal movement of the knife block is stepwise adjustable. The sliding longitudinal stop and measuring scale ensure accurate repeat work.

The special lever system of the machine ensure a very easy operation. Twin return springs automatically bring the knives back to starting position.

Morso F is delivered with safety guard, waste chute, sliding longitudinal stop, measuring scale, adjustable fences ( 45 degrees & 90 degrees), and adjustable rebate supports.

Morso F is manually operated with a foot pedal - needs no compressor or electricity and can therefore be operated anywhere.

UE-032122B-2 Seal Masterpiece 500T-X Dry Mount Press

***Manufacturer's Information:

Seal Masterpiece 500T-X. It is Seal's largest format mechanical press and used by framing professionals. Applications for this press include mounting, laminating and applying texture to large photos, artwork and posters.

Designed to consistently provide even heat and pressure for creative dry mounting and laminating by framing professionals.

Ideal applications for this press include creative dry mounting, laminating and applying texture to artwork of all shapes and sizes.

Press is simple to operate when you are dry mounting, laminating, or backing prints, photos, posters, maps, charts or any frequently handled item which you would like to protect and preserve. They are durable and allow maximum pressure because of their rugged metal construction.

Working area: 26" x 34" can take work up to any length

Overall Dimensions (LxWxH): 37" x 39" x 12"

Net Weight 210 lb. (125kg)

Shipping Weight 275 lbs

Specifications:
- 26" x 34" Platen Size
- Solid State Thermostat for Accuracy and Electrical Economy.
- Easy Reading Thermostat
- Mount up to 52" x Infinity
- Shipping Weight - 275 lbs.
- Power Requirements - 120 Vac 12 Amps

UE-032122B-3 Cassese CS88 Vnailer / Joiner / Underpinner

***Manufacturer's Information:

The CS88 & CS89 have been the most popular models in the world for over 15 years, and thus their reputation and reliability are proved. Although manufactured to the highest standards, the prices of the CS88 & CS89 remain very competitive.

FEATURES OF THE CS88 & CS89:

Cassese wedges cartridge system
Easy change of wedge size with no need to adjust or change any part on the machine. All Cassese underpinners are able to use the full range of Cassese cartridge wedges in 7 different sizes, available in both
softwood and hardwood.

Adjustable joining angle
It is possible to adjust the joining angle of the fences to correct the gap if the cutting angle is not perfectly at 45 degrees.

Patented self-adjusting fences
Are adaptable to the shape of any moulding profile, to prevent gaps in the top or bottom of the join.

Horizontal rebate clamp
Secures the moulding pieces together to ensure perfect alignment of the mitres while joining.

Quick-Change top clamp
To adjust between softwood and hardwood and different mouldings' shapes.

2 positioning stops
(front and back) allow wedges to be stacked up, even in hardwood.

Unique triangular design table
Makes it easy to adapt to the corner of a workbench, which assists in supporting the frame while joining.

CS 88 Foot operated

Mobile foot pedal
The pedal position can be easily changed between the back or the front of the machine, and can also be set up for either left or right foot operation.

Unique pulley and cable drive system
Multiplies the force applied on the foot pedal more than 3 times, thus making it easy for the operator to drive wedges into the hardest timbers.

CS 89 Air operated

Pneumatic double-stage pedal
Permits the operator to clamp the mouldings and visually check the join before inserting the wedge.

No pressure adjustment required

When changing between softwood and hardwood.

Mouldings:
- Width 5mm-95mm
- Height 7mm-85mm
- Smallest internal frame size 70mm x 70mm

Dimensions:
- Length 450mm
- Width 600mm
- Height 1090mm
- Weight 25 Kg 31 kg
- Air supply nil 6 bars using
- 3 litres / cycle

UE-032122B-4 Fletcher - Terry 3000 Multi Material Cutter

(SOLD)

***Manufacturer's Information:

The 3000 is the ideal product to make short work of the critical task of preparing your materials for framing. With its simplistic design and user-friendly cutting head, you will see an immediate improvement in accuracy and productivity in the first day of use. Our versatile 3000 unit features a three position cutting turret for glass, acrylics and mat board sizing. Equipped with a patented score and break-out feature, the 3000 unit provides effortless and operator-safe cutting with every use.

Available in 48" (1219mm) or 60" (1524mm) vertical cutting capacity.

The Fletcher 3000 Wall Machine has a proven track record of success in frame shops worldwide. With its innovative and patented cutting process, the 3000 provides effortless cutting of the materials that matter to you most. The 3000 has quickly become the standard in picture framing for sizing of matboard, foamboard, glass and plastics; all with equal accuracy and consistency.

Patented glass cutting turret has a ramping feature that allows the lifting of turret device on top edge of glass resulting in a cleaner edge break.

Wall mounted or free-standing

Substrate Cutting Capabilities:
- Glass: Up to 1/4" (6 mm)
- Mirror: Up to 1/4" (6 mm)
- Acrylic: Up to 1/4" (6 mm)
- Matboard: 4, 8, 12 ply
- Foamboard: Up to 1/4" (6 mm)

Technical Specifications:
- Vertical Cutting Capacity: 48"
- Cutting Head: Rides on high tensile strength steel, hard chrome plated and polished, resulting in smoother gliding action for consistent cutting head performance and longevity.
- Vertical Bars: Rails do not bend or flex during the cutting process for straight, accurate cutting over the entire substrate height.
- Material Clamping System: Patented lever-type clamping system that secures in place substrate heights up to 48" to prevent buckling and shifting of material during the cutting process.

UE-032122B-5 Fletcher - Terry 2100 60" Mat Cutter

(SOLD)

***Manufacturer's Information:

Fletcher-Terry 2200 Mat Cutter

Professional level mat or mount board cutter for creating bevels and producing V-Grooves as decorative features and finishes in matboard up to 4-ply. Features a dual cutting feature for matboard specialty cutting or a 90 degree cutting feature for sizing matboard or cutting of foamboard up to 1/2" (13mm). Available machine sizes, 48" (1.2m) or 60" (1.5m).

Besides being used at many global custom frame shops, the 2200 is a great investment and business expansion tool for sign companies, photo studios, boutique shops, quick printers, and arts & crafts shops.

Our Fletcher 2200 mat cutter provides specialty cutting for creating bevels and producing v-grooves in mat board used for picture framing and art / graphics retail matting.

Available in 48" or 60" cutting capacity.

Performance Features:
- Manual mat cutting for sizing cuts, cutting bevels and producing v-grooves.
- Cuts 4-ply mat board.
- Straight line cutting of foam board up to 1/2" (13 mm).
- Maximum material cutting thickness: 1/2" (13mm), 90 degrees cut only.
- Available machine sizes: 48" (1.2m) and 60" (1.5m).