Picture Framing Equipment Lot: Morso Chopper, C&H Oval Mat & Glass Cutter / Circle Cutter, Assorted Hardware, Assorted Matboard, Assorted Wood Moulding, Miter Saw Hand Cutter, & Ingento Paper Cutter

AGFS-79a Morso Chopper $ 800

(SOLD)

With measuring table & stop

Machine Includes: A set of new blades / knives

***Manufacturer's Information:

Morso Model F Mitering Machine

Morso Model F mitring machine cuts double mitre at 45° and single mitre up to 90°. Tenon, mortise joints, and a wide variety of angled cuts can also be made.

When using the Morso F, you will have no dust compared to a saw. Also, the waste of your moulding will be minimized as Morso F cuts double mitres very close, (less than one mm waste of moulding.)

The mitre saw cannot do the mitres as close, and therefore the waste by using a saw, will always be minimum one centimetre.

One centimetre of waste does not sound of much, but if a calculation is done of 100 cuts a day, it actually turns out that the waste over a year is 260 meters waste of moulding! That is only with 100 cuts a day!

Morso F leaves the cut surface of the wood perfectly smooth and accurate, requiring no further preparation before joining. The horizontal movement of the knife block is stepwise adjustable. The sliding longitudinal stop and measuring scale ensure accurate repeat work.

The special lever system of the machine ensures a very easy operation. Twin return springs automatically bring the knives back to starting position.

Morso F is delivered with safety guard, waste chute, sliding longitudinal stop, measuring scale, adjustable fences (45° x 90°), and adjustable rebate supports.

Morso F is manually operated with a foot pedal, needs no compressor or electricity and can therefore be operated anywhere.

Technical data for Morso Model F Mitring Machine
- Double mitre: 45°
- Single mitre: up to 90°
- Cutting width, max.:100 mm
- Cutting height, max.: 160 mm
- Square cutting: 65/65 mm
- Measuring scale up to: 1,500 mm
- Net weight: 90 kg

AGFS-79b C&H Oval Mat & Glass Cutter / Circle Cutter $ 350

Oval Master Circle mat cutter, glass and acrylic all-in-one cutter. This cutter is used for cutting oval and round glass pieces.

Bainbridge Model: 789A

Machine Includes: tools as shown

C&H Oval Cutter User Manual

AGFS-79c Assorted Hardware $ 50

AGFS-79d Assorted Matboard $ 600

Crescent Carboard & Bainbridge mat board (Quantity: 200)

AGFS-79e Assorted Wood Moulding $ 300

(SOLD)

AGFS-79f Miter Saw Hand Cutter $ 10

AGFS-79h Ingento Paper Cutter $ 150

This used Ingento cutter is about 30 x 38"

***Manufacturer's Information:

Swingline ClassicCut Ingento Guillotine Trimmers

Swingline Model 1182

Trim and cut paper with accurate, smooth precision using this Swingline 1182 ClassicCut Ingento 36" 15 sheet guillotine paper trimmer. It's the perfect tool for offices, schools, health care facilities, or marketing and publishing agencies where a sturdy, well-built paper trimmer is essential. Made from solid maple, its sturdy design also adds a classic touch to your workspace. This guillotine can cut up to 15" sheets at one time, with a 36" maximum cutting length.

Overall Dimensions:
- Width: 37"
- Depth: 51 1/4"
- Height: 7 5/8"