Voorwood Model L115B Edge Foiler (used) Item # UGW-18 (TN)
Item Is
No Longer
Available
Voorwood Model L115B Edge Foiler (used) Item # UGW-18 (TN)
Voorwood Model L115B Edge Foiler (used) Item # UGW-18 (TN)
Voorwood Model L115B Edge Foiler (used) Item # UGW-18 (TN)
Voorwood Model L115B Edge Foiler (used) Item # UGW-18 (TN)
Voorwood Model L115B Edge Foiler (used) Item # UGW-18 (TN)
Voorwood Model L115B Edge Foiler (used) Item # UGW-18 (TN)

Used

Voorwood Model L115B Edge Foiler

SKU: UGW-18

Voorwood Model L115B Edge Foiler

Sub lamination - print on MDF / HDF, then run edges through this and put foil.

From the seller: " This used foiler is in Good Working Condition. An item that has been used previously. The item may have some signs of cosmetic wear, but is fully?operational and functions as intended."

Only has 2,204 hours on it

$ 27,500

Customers can pick this machine up in Tennessee or shipped for an additional fee.

 

From the manufacturer:

  • For as long as we can remember Voorwood has been the go to brand for foilers! Whats even better than buying a Voorwood is finding a used L115B with 2,204 hours. Full set of manuals, tooling, and foil per pictures included. Please read below for specifications on this machine.Specifications for ?this? L115B EDGE FOILER:The Voorwood Series L115 Shaper Foiler profiles and sands, then applies transfer-finishing foil to a single edge of your MDF parts in one pass. The L115 is capable of producing over 8,000 lineal feet (2500M) of finished product per shift. Production rates may vary with part size and operational conditions. Stock is transported

    through the machine by a bottom feed chain with special pads that grip the stock securely while it passes the workstations. With digital readouts and MicroPoint tilt at the workstations and digital readout on the eversquare infeed guide, this machine is designed for easy set-up and repeatable tool change between profiles.MAIN FRAME:

    The welded box frame construction provides a rigid structure insuring accurate and repeatable tool positioning. Base weldment is pre-drilled for permanent machine installation.

    TRANSPORTER ASSEMBLY:

    The transporter assembly incorporates a large infeed support area and is equipped with an ever-square infeed guide with digital readout, adjustable feed drive motor and bottom feed chain. Substrate is positioned on infeed plate against the edge guide; when drive motor is activated, bottom feed chain transports the substrate past the shaping, sanding and foiling stations. Bottom feed chain is topped with non-marking polymer pads. An electronically controlled oil pump automatically lubricates transporter chain race assembly.

    ROLLER HOLDDOWN ASSEMBLY:

    The steel plate holddown beam is equipped with a safety switch at the infeed area, anti-intrusion hood and nonmarking polymer rollers. Polymer rollers hold the substrate against the bottom pads while the workpiece is transported past the shaping, sanding and foiling stations. Infeed limit switch deactivates drive motor if substrate is misfed. Digital readout on vertical adjustment handwheel adjusts for substrate thickness.

    OUTBOARD SUPPORT:

    Non-marking outboard rollers support the weight of extra wide substrates as they are transported past the shaping and sanding stations.

    SCORING STATION:

    Top and bottom high speed arbors with climb cut rotation to? cleanly cut through papers, veneers, ect. Accurate digital readouts in/out and up/down adjustments facilitate easy tool change and repeatable settings.SHAPING STATION:

    Shaping station is equipped with precision-balanced drive motor and spindle. The spindle rotates against the direction of feed. Spindle is equipped with double collets and has angular, horizontal and vertical adjustments with accurate and repeatable digital readouts as well as a spindle lock to facilitate tool changes. Each station is equipped with dust hood/safety guard.

    SHAPING STATION:

    Shaping station is equipped with precision-balanced drive motor and spindle. The spindle rotates against the direction of feed. Spindle is equipped with double collets and has angular, horizontal, and vertical adjustments with accurate and repeatable digital readouts as well as a spindle lock to facilitate tool changes. Each station is equipped with dust hood/safety guard.

    SANDING STATIONS:

    Sanding station is equipped with precision-balanced drive motor and spindle. The spindle rotates against the direction of feed. The spindle is equipped with double collets and has angular, horizontal and vertical adjustments with accurate and repeatable digital readouts and is equipped with dust hood/safety guard.

    FOILING STATION:

    Foiling station is equipped with 8-inch diameter foil wheel, non-contact sensor and oven for automatic temperature control. Wheel adjustment positions are by digital readouts and MicroPoint tilt for easy tool changes. The foil unwind has a large capacity with accurate tracking and constant tension adjustments. The adjustable torque rewind is conveniently located for removal of used foil.

    CONTROL AND COMPONENT PANELS:

    Lighted touch screen controls are located on a swing arm for operator convenience. Emergency stop pushbutton controls are located at the infeed and outfeed areas. The function and logic of the machine is controlled by a ?PLC?. Control and component panels conform to ANSI/NFPA 70 and NFPA 79 electrical standards and can meet European Community standards. Machine is pre-wired for installation in customer?s factory.

    DUST COLLECTION:

    Each shaping and sanding station is equipped with a dust hood and hose. Manifold is provided for connection to customer?s dust collection system. The L115 is a production-oriented machine designed for reliability and operator convenience. It is furnished

    ready for hookup with safety enclosure.

***Concerning "Used" Items: Although we strive for accuracy, some specifications are provided to us by the Seller. Cross-check with manufacturer for any difference between the machine being sold and what is stated in the manufacturer's information. Descriptions of condition of the equipment are not warranties. Descriptions are intended only as a courtesy and their accuracy is not guaranteed. Buyer inspection encouraged. There are no warranties or guarantees implied unless otherwise stated. All items are sold "As Is, Where Is, and With All Faults." No guarantee is made as to fitness for a particular purpose, implied or otherwise. Feel free to contact us if you have further questions before purchasing.

GET PRICING

About this Item

Pricing & Shipping

Price: $27,500.00

Interested in the product? Fill out the form or call us at 330-405-9421.

Product is located in Tennessee. Customers can pick the machine up or have it shipped for an additional fee.

  • Do not include +1 country code. If outside of USA, please include phone number in message box.

Can't Find the Equipment You Need?

We're constantly getting new listings. Let us know what you're looking for and we'll notify you when the equipment is available.