Equipment Lot: GAPP Stretch Master Production Canvas Stretcher & Fletcher AMP U400 Frame Joiner

Machine and supplies can be purchased separately.
Equipment that you need to start a production picture framing business. Great for an additional location or new business venture!
From the seller: "All equipment in this lot are in good working condition unless specified differently. "

UE-121120E-3 CTD D20R Double Miter Saw $ $1,500 (Sold)
Manufacturer's Information:
Standard Features and Specifications:

• Blade Capacity: 12 " OD (305mm); saw blades not included.
• Spindle & Pivot: Both mounted on pre-loaded and sealed bearings; uses our time tested 200R Series saw head; saw arm, pivot brackets and table are precision machined and ground steel plate and iron.
• Arbor: 1 " (25.4mm) with 2-1/2 " (64mm) saw collars; 3700 RPM of spindle.
• Motors & Voltages: 1 H.P. single phase, 115 Volt, Totally Enclosed Fan Cooled Motors with toggle switch and plug; each motor draws 15 amps at 115 Volt; completely enclosed 2-belt drive; 230 Volt with Dual Magnetic Starter available.
• Floor Stand: Close coupled heavy gage steel floor stand with removable dust and scrap drawer; Rabbet Measuring System included.
• Actuation: Manual hand operation of independent saw heads.
• Size & Weight: 46 " (117cm) Wide x 22 " (56cm) front to back x 56 " (142cm) High "; Weight 300 lbs. (136 kg).
• Production Rate: Up to five frames per minute; actual production rates vary with the type and width of material to be cut.
• Dust Collection & Scrap: The D20R is provided with a dust and scrap drawer; most of the dust and chips will fall into this drawer; empty as needed; 4 " (102mm) dust outlet available; 600 CFM required.
• Cutting Capacity: 3 " (76.2mm) High x 5-3/4 " (146mm) Wide on non-ferrous metals, wood, and plastic sections

UE-121120E-4 Jett DC1100C Dust Collector $ 250 (Sold)

UE-121120E-1 GAPP Stretch Master Production Canvas Stretcher $ 6,000  (SOLD)
From the manufacturer: 
GAPP Stretch Master Production
The Stretch Master Production is a machine designed to cater for companies that have a need for producing high volumes at a high rate of speed with less effort by the operator. It is the only machine on the market that can stretch two sides at once.
Under the right production setup, it has the capacity to complete a stretched canvas in 30 seconds.  It is a very strong, robust machine allowing for high rate of use. It is available in sizes from 1m – 1.6m (39 "-60 "). 
Sizes Available:39.37 " (1m)  , 62.99 " (1.6m)  , 62.99 " (1.6m) with pneumatic brake option

UE-121120E-2 Fletcher AMP U400 Frame Joiner $ 3,500 (Sold)
From the manufacturer:
(Formerly labeled AMP VN144 / Newer generation to VN4 )
The U-400 has been designed for ease of operation and is particularly well suited for joining large frames up to 5 ½ " (140mm) in width.
Supplied with a tilting floor stand, the machine can be operated from the front or back and has a single stage pneumatic foot pedal that activates the Horizontal Clamp, securing moulding during the joining process.
After the framer sets the two position stops for measuring the max distance between strokes, a dual function hand lever is then used to position and actuate both the Vertical Mould Holding Clamp and the V-Nail driver inserting V-Nails anywhere along the pre-set stroke distance.
A key operating feature for the U-400 allows the operator to quickly change V-Nail mm size using an interchangeable metal magazine channel. Operator easily accesses the interchangeable channel from the rear of the machine to load the appropriate V-Nail size. This feature eliminates the added purchased cost of plastic nail cartridges.

Frame Joining Capabilities:
Moulding Width: 1/4 " up to 5 1/2 "
Moulding Height: 1/4 " up to 3 1/4 "
Max Distance Between Vnails: 7 7/8 "
Pre-set v-nail position stops: Multiple
Vnail Sizes: 5, 7, 10, 12, 15
Vnail Channel Capacity: 220 vnails/channel
Power Requirements: Compressed Air 4NI at 5 Bar
CE Compliant