Equipment Lot: Pistorius MN200 Double Miter Saw & ITW AMP VN4+E2 Programmable Frame Joiner

From the seller: "Machines were run about a year ago, they are in operable condition."

Sold Items in Lot:

• SKU # UE-011420A-1 Pistorius MN200 Double Miter Saw
• SKU # UE-011420A-2 ITW AMP VN4+E2 Programmable Frame Joiner

UE-011420A-1 Pistorius MN200 Double Miter Saw $3,800 (Sold)
From the Manufacturer & the web

Pistorius Model MN-200…for cutting wood, aluminum, plastics and fiberglass
Specifications: Blade Capacity: 12"Blade Arbors: 5/8"Maximum Cutting Height: 2-5/8"Maximum Cutting Width: 3-3/8"Motor HP: 1.5(Each)Electrical: 220/440V(Wired 220)/3PH2-5/8" Max. height & 3-5/16" max. width cap, (2) 1.5HP, 230/460V, 3,450RPM Motors, 12" blade diameter capacity, 5/8" diameter belt driven saw arbors, Non-staggered blade movement – not for notching, only approx. 7" of travel is necessary to complete the stroke of the saw blades, Simultaneously cuts a left and right 45 degree miter with each cycle of the machine thus wasting little material. Leaves hands free to hold the material. Easy to regulate the cutting speed. The counterbalanced saw heads return automatically. The saw blades extend beyond the fence line when cycling, cutting completely through the material. Foot pedal operated, actuated by air. Scrap discharges to the bottom of the machine.  Air filter, regulator, lubricator, Magnetic push button starters

Specifications:
Blade Capacity: 12"   ,
Blade Arbors: 5/8"Maximum
Cutting Height: 2-5/8"Maximum Cutting Width: 3-3/8"
Motor HP: 1.5(Each)
Electrical: 220/440V (Wired 220)/3PH

UE-011420A-2 ITW AMP VN4+E2 Programmable Frame Joiner $ 1,500 (Sold)
Miter Mite VN4 Electronic / 2 Position Automatic V-Nail Machine
From the seller "The machine was just pulled from Service less than 30 days ago. I can plug it in and run parts immediately. The machine is a older machine that run's, but it is "high mileage". The standard setup for this machine works, it may need a additional adjustment from time to time."
There are 2 pedals for this machine. The first pedal is for the computer side to set up position and number of nails per position. The second pedal is for manual use without the computer.
Manufacturer's Information:

ITW AMP VN4E3 / Minigraph 4E3 VNail Joiner Owners Operating Manual

Mitre-Mite VN4E-3L Joiner
The Mitre-Mite VN4E-3L has been designed to last many years in a high production environment. It has a reinforced nail driver for trouble free cycling plus heavy duty air cylinders for extended periods of production with very little maintenance. Also, this machine has a reserve air tank which keeps system pressure at the desired levels when driving the hardwoods and MDF. The VN4E-3L is fast and comes equipped with a computer which electronically controls where v-nails are driven along the frame joint. V-Nails can be driven or stacked in up to 3 positions per corner. Other features include a pneumatic load / feed system to eliminate jams, clamping fixtures to fit most profiles, and a long stroke nail driver for assembling larger frames.Specifications:
Machine Size: Width 32" / Length 25" / Height 55" / Weight 275 lbs
Power Source: Electronic / Pneumatic
Framing Capability: Frame Width 3/8" to 6 1/2" /  Frame Height 1/4" to 5 1/2" Tilt. Angle fence for custom fit. 4 / 6 / 8 sided frames. Drives 2 nails per corner in less than half a second.
Nail Sizes: 3, 5, 7, 10, 12, 15 mm
Optional Accessories: Metal Extension wings, wood support table

Also see: Alphamachine Minigraf VN4E2 Programmable V-nailer