Fletcher AMP U-400 Semi-Automatic / Pneumatic Underpinner / Joiner / Vnailer
New w/ Factory Warranty
*From the Manufacturer:
AMP U400 Frame Joiner
The U-400 has been designed for ease of operation and is particularly well suited for joining large frames up to 5 ½” (140mm) in width.
Supplied with a tilting floor stand, the machine can be operated from the front or back and has a single stage pneumatic foot pedal that activates the Horizontal Clamp, securing moulding during the joining process.
After the framer sets the two position stops for measuring the max distance between strokes, a dual function hand lever is then used to position and actuate both the Vertical Mould Holding Clamp and the V-Nail driver inserting V-Nails anywhere along the pre-set stroke distance.
A key operating feature for the U-400 allows the operator to quickly change V-Nail mm size using an interchangeable metal magazine channel. Operator easily accesses the interchangeable channel from the rear of the machine to load the appropriate V-Nail size. This feature eliminates the added purchased cost of plastic nail cartridges.
(Formerly labeled AMP VN144 )
- (1) “Multi-Sized” Nail Head, (1) 7mm Channel Magazine, (1) 10mm Channel Magazine, (1) 12mm Channel Magazine, (1) Single Vertical Positive Placement Clamp
- (1) Single Metal Pressure Plate, (1) Magnetic Base for Clamp Assembly, (1) Blue Rubber Pad (SW), (1) Yellow Rubber Pad (MW), (1) Black Rubber Pad (HW)
- (1) Round Pressure Pad – Felt, (1) Front Horizontal Clamp, (1) Adjustable Fence – 2 Knobs, (1) 4mm Allen Wrench, (1) 5mm Allen Wrench, (1) 6mm Allen Wrench
- (1) Magnetic V-Nail Pick-up Tool, (4) Machine base levelers, (1) Fence template 4-6-8 side, (1) Floor Stand, (4) Machine base levelers, (1) Machine Manual
Frame Joining Capabilities:
- Moulding Width: 1/4″ up to 5 1/2″
- Moulding Height: 1/4″ up to 3 1/4″
- Max Distance Between Vnails: 7 7/8″
- Pre-set v-nail position stops: Multiple
- Vnail Sizes: 5, 7, 10, 12, 15
- Vnail Channel Capacity: 220 vnails/channel
- Compressed Air 4NI at 5 Bar
- CE Compliant
Unique Performance Features:
- Handles up to 5 ½ ” (140mm) wide moulding – Unique competitive advantage over other industry frame joiners
- Designed with “interchangeable channel magazines” allowing operator to quickly change V-Nail sizes
- Operator controlled arm for left or right operations – allows framer to accurately position the Nail Head for inserting or stacking V-Nails anywhere along the frame joint
- Uses both a vertical and horizontal clamping method
- Adjustable working table height for operator comfort
- Easy table tilt adjustment
- Join either from back or front of machine
- Length: 23 3/4″ (600mm)
- Width: 15 1/4″ (590mm)
- Height: 53″ (1350mm)
- Weight: 198lbs (90kg)
This item is shipped by freight company. Please request a shipping quote if needed.