Framing Equipment & Supplies: Hardware, Fletcher 3100, Morso Chopper
Lot Price Price: $ 300 (for what is left)
Available Items in Lot:
- SKU # UE-060820A-3 Framing Hardware and Picture Frames
Sold Items in Lot:
- SKU # UE-060820A-1 Morso Chopper
- SKU # UE-060820A-2 Fletcher – Terry 3100 Glass Cutter
From the seller “All machines are in good working order unless otherwise specified below. “
Machines can be purchased as a lot or individually. See below for individual item pricing.
*** From the manufacturer:
Morso Model F Mitering Machine (Price new is $3,500 USD / about $4,500 CAD)
Morso Model F mitring machine cuts double mitre at 45° and single mitre up to 90°. Tenon, mortise joints, and a wide variety of angled cuts can also be made.
When using the Morso F, you will have no dust compared to a saw. Also, the waste of your moulding will be minimized as Morso F cuts double mitres very close, ( less than one mm waste of moulding ).
The mitre saw cannot do the mitres as close, and therefore the waste by using a saw, will always be minimum one centimetre.
One centimetre of waste does not sound of much, but if a calculation is done of 100 cuts a day, it actually turns out that the waste over a year is 260 meters waste of moulding…. ( That is only with 100 cuts a day…)
Morso F leaves the cut surface of the wood perfectly smooth and accurate, requiring no further preparation before joining. The horizontal movement of the knife block is stepwise adjustable. The sliding longitudinal stop and measuring scale ensure accurate repeat work.
The special lever system of the machine ensure a very easy operation. Twin return springs automatically bring the knives back to starting position.
Morso F is delivered with safety guard, waste chute, sliding longitudinal stop, measuring scale, adjustable fences ( 45° – 90° ), and adjustable rebate supports.
Morso F is manually operated with a foot pedal – needs no compressor or electricity and can therefore be operated anywhere.
|Technical data for|
Morso Model F Mitring Machine
|Single mitre up to||90°|
|Cutting width, max.||100 mm|
|Cutting height, max.||160 mm|
|Square cutting||65/65 mm|
|Measuring scale up to||1,500 mm|
|Net weight||90 kg|
*** From the manufacturer
Fletcher 3100 Multi-Material Cutter will cut hardboard, Gator board, foam board, and mat board, and will score glass and plastic. Our versatile 3100 Multi-Material Cutter features a spring-loaded cutting assembly with an interchangeable pillar post allowing you the convenience of quickly switching from one material to another.
Wall-mounted machine available in 63″ cutting capacity
Cuts matboard and foamboard and up to 1/2″ (12.7mm) thick
Cuts hardboard (MDF) up to 3/32″ (2.4mm)
Scores glass and plastic up to 1/4″ (6.35mm)
Fletcher 3100 Multi-Material Cutter will cut hardboard, Gator board, foam board, and mat board, and will score glass and plastic.
Interchangeable Cutting Head Technology
Cuts clean, debris-free, no secondary processing
Optional laser sight line for accurate cutting
Mounts on wall or free-standing
Cuts wide range of substrates
Substrate Cutting Capabilities:
Glass Up to 1/4” (6mm)
Plastics & Acrylics Up to 1/4” (6mm)
Aluminum Sheets Up to .040”
MDF Up to 3/32” (2.4mm)
ACM Up to .078” (2mm)
Gator Board Up to 1/2” (13mm)
Vertical Cutting Capacity: 63″ (1.6m)
Cutting Head: Rides on high tensile strength steel, hard chrome plated and polished, resulting in smoother gliding action for consistent cutting head performance and longevity.
Vertical Bars: Rails do not bend or flex during the cutting process for straight, accurate cutting over the entire substrate height.
Material Clamping System: Patented lever-type clamping system that secures in place substrate heights up to 60″ (152cm) to prevent buckling and shifting of material during the cutting process.