Hoffmann CB-M Manual Bench-Top Routing Machine

New w/ Factory Warranty

***From the Manufacturer:

CB-M is a professional level, bench-top end coping machine for precise end trimming of applied window and door mullions.

The machine is designed to produce an exact counter-profile on the ends of applied mullions when manufacturing Georgian-style windows, cabinet doors and furniture.

Speed control allows for optimum adjustment depending on router bit design and mullion profiles as well as wood species.

Lateral left and right movement of router motors is accomplished by manually moving the hand levers; built-in springs assure automatic return to center position.

End stops incorporated in machine design eliminate chance of router bits being "pulled through" mullion ends to avoid tear-out

Motors are independently adjusted for proper height position; set-screws with lock-nuts aid in fine adjustment of correct motor setting.

Mullion end-stop is equipped with fine-adjustment knob to adjust depth of cope cut.

Pneumatic hold-down clamp with short-stroke cylinder assures secure holding of workpiece during routing operation.

Customer to source tooling from own supplier to match their specific mullions profiles.

Sample Router Bit Design - suggested shear angle "X" is 5 degrees to reduce chance of tear-out

Operation:

The center guides on machine table are adjusted depending on mullion width for a snug fit.

Once the mullion is placed on machine, the pneumatic hold-down clamp is activated with front mounted switch.

The router carriage is moved sideways from one side until the center, then from the other side to complete the coping cut.

Hold-down clamp is released and finished mullion is removed.

SKU: NFE-351 -S1001000 CB-M