Hoffmann MU-2P Dovetail Routing Machine

Hoffmann MU-2P Dovetail Routing Machine

From the seller " Hoffman Router is in good working order. "

$ 2,750

This machine can be picked up in Pennsylvania or have it shipped for additional fee.

From the Manufacturer:

The Hoffmann MU2-P bench-top routing machine is equipped

with a high speed router motor, located at the center of the machine. The

supplied 45 degree fence plate, which is guided in a keyway in the machine

table, is used to accurately position the material on the table. The location of

the dovetail slot for the Hoffmann Dovetail Key is adjusted by simply moving

this fence plate. Once set, the plate is locked in place and the routing

sequence can begin. The machine is equipped with a pneumatic pedal that starts the routing

process. Upon depressing the foot pedal, the routing sequence is initiated:

*pneumatic clamp secures workpiece on machine table

*router head advances until the pre-set height position is reached

*router head returns to base position

*pneumatic clamp releases work piece

Output is approx. 16 routing strokes per minute, which translates into 2 completely processed rectangular frames. These numbers include material handling, but obviously depend on routing depth, feed speed, material flow and operator performance as well. Flow control valves on the main pneumatic cylinder allow the operator to adjust the upward and downward feed rate independently, depending on the material being processed. On its backside, the large heavy-duty cast aluminum machine base has a 1 3/4" diameter dust collection port to connect a shop vacuum for dust free operation.The supplied outer bit is solid tungsten carbide, made to exacting specifications. Depending on the routing depth and the material to be routed, the useable cutter life is approx. 10,000 strokes. Every machine is shipped with a tool kit and set-up jig, which allows a router, bit change in only minutes. Diamond tooling is also available.

Features

* Air regulator

* Air filter

* Oil lubricator assembly

* W-2 carbide router bit

* Standard 45 degree fence plate and square top installed