Italpresse PL/9 SPECIAL Feed Through Panel/Board Composer Press
From the seller: “This used machine is in good working condition.”
Made In Italy
Assembled Dimensions: 236 x 158 x 89 inches
Assembled Weight: 15435 lbs.
ITALPRESSE PL/9 SPECIAL Feed Through Panel/Board Composer Press:
This is the model with the platen operating in a down stroke pressure cycle; platen dimension of 2,500 mm x 1,300 mm (98.5″ x 51″).
This press takes parts that have adhesive applied to the edge which are then set up on the composition table (Infeed ) as a panel ready to be pushed into the press to receive edge pressure and down pressure with heat to cure the adhesive. The platens are both thermal oil heated. There is a powered horizontal bar that pushes the panels into the press and this same bar pushes the parts out once completed.
— (6) Hydraulic down stroke cylinders of 120 mm (4.7″) for top pressure & (5) hydraulic back-to-front horizontal stroke cylinders of 120 mm (4.7″) for continuous production of panels.
— (5) Hydraulic side pressure cylinders of 120 mm (4.7″) for panel dimension control.
— Total pressure of 90 tons; heating platens, thermo oil heated.
This machine can be picked up in Canada or have it shipped for additional fee.
UE-051421C – 14819