Used
Picture Framing Equipment Lot: Morso Chopper / Choppers
SKU: UE-070921A
Date listed: July 9, 2021
Picture Framing Equipment Lot: Morso Chopper / Choppers
Available Items in Lot:
- All of the items in this lot have been (SOLD)
Sold Items in Lot:
- SKU # UE-070921A-1 Morso F Chopper $ 800 Reduced!!! (SOLD)
- SKU # UE-070921A-2 Morso F Chopper $300 Reduced!!! (SOLD)
From the Seller: "All equipment in this lot are in good working condition unless otherwise specified below."
*Items in this lot can be purchased individually or as a grouping.
About this Item
Features & Specifications
UE-070921A-1 Morso F Chopper $ 800 Reduced!!!
(SOLD)
Includes measuring table and an extra set of blades
***Manufacturer's Information:
Morso Model F Mitering Machine
Morso Model F mitring machine cuts double mitre at 45 degrees and single mitre up to 90 degrees. Tenon, mortise joints, and a wide variety of angled cuts can also be made. When using the Morso F, you will have no dust compared to a saw. Also, the waste of your moulding will be minimized as Morso F cuts double mitres very close, ( less than one mm waste of moulding ). The mitre saw cannot do the mitres as close, and therefore the waste by using a saw, will always be minimum one centimetre. One centimetre of waste does not sound of much, but if a calculation is done of 100 cuts a day, it actually turns out that the waste over a year is 260 meters waste of moulding. ( That is only with 100 cuts a day) Morso F leaves the cut surface of the wood perfectly smooth and accurate, requiring no further preparation before joining. The horizontal movement of the knife block is stepwise adjustable. The sliding longitudinal stop and measuring scale ensure accurate repeat work. The special lever system of the machine ensure a very easy operation. Twin return springs automatically bring the knives back to starting position. Morso F is delivered with safety guard, waste chute, sliding longitudinal stop, measuring scale, adjustable fences ( 45 degrees & 90 degrees), and adjustable rebate supports. Morso F is manually operated with a foot pedal - needs no compressor or electricity and can therefore be operated anywhere.
Technical data for Morso Model F Mitring Machine:
- Double mitre: 45 degrees
- Single mitre: up to 90 degrees
- Cutting width: max. 100 mm
- Cutting height: max. 160 mm
- Square cutting: 65/65 mm
- Measuring scale: up to 1,500 mm
- Net weight: 90 kg
UE-070921A-2 Morso F Chopper $300 Reduced!!!
(SOLD)
Does NOT include measuring table
***Manufacturer's Information:
Morso Model F Mitering Machine
Morso Model F mitring machine cuts double mitre at 45 degrees and single mitre up to 90 degrees. Tenon, mortise joints, and a wide variety of angled cuts can also be made. When using the Morso F, you will have no dust compared to a saw. Also, the waste of your moulding will be minimized as Morso F cuts double mitres very close, ( less than one mm waste of moulding ). The mitre saw cannot do the mitres as close, and therefore the waste by using a saw, will always be minimum one centimetre. One centimetre of waste does not sound of much, but if a calculation is done of 100 cuts a day, it actually turns out that the waste over a year is 260 meters waste of moulding. ( That is only with 100 cuts a day) Morso F leaves the cut surface of the wood perfectly smooth and accurate, requiring no further preparation before joining. The horizontal movement of the knife block is stepwise adjustable. The sliding longitudinal stop and measuring scale ensure accurate repeat work. The special lever system of the machine ensure a very easy operation. Twin return springs automatically bring the knives back to starting position. Morso F is delivered with safety guard, waste chute, sliding longitudinal stop, measuring scale, adjustable fences ( 45 degrees & 90 degrees), and adjustable rebate supports. Morso F is manually operated with a foot pedal - needs no compressor or electricity and can therefore be operated anywhere.
Technical data for Morso Model F Mitring Machine:
- Double mitre: 45 degrees
- Single mitre: up to 90 degrees
- Cutting width: max. 100 mm
- Cutting height: max. 160 mm
- Square cutting: 65/65 mm
- Measuring scale: up to 1,500 mm
- Net weight: 90 kg
***Concerning "Used" Items: Although we strive for accuracy, some specifications are provided to us by the Seller. Cross-check with manufacturer for any difference between the machine being sold and what is stated in the manufacturer's information. Descriptions of condition of the equipment are not warranties. Descriptions are intended only as a courtesy and their accuracy is not guaranteed. Buyer inspection encouraged. There are no warranties or guarantees implied unless otherwise stated. All items are sold "As Is, Where Is, and With All Faults." No guarantee is made as to fitness for a particular purpose, implied or otherwise. Feel free to contact us if you have further questions before purchasing.
Pricing & Shipping
Price: $1,000.00
Interested in the product? Fill out the form or call us at 330-405-9421.
Product is located in Florida. Customers can pick the machine up or have it shipped for an additional fee.
Can't Find the Equipment You Need?
We're constantly getting new listings. Let us know what you're looking for and we'll notify you when the equipment is available.
Turn Your Old Equipment Into Cash
No longer need your equipment? We can help.