Picture Framing Equipment Lot / Framing Business (used) Item # UE-03212020A (Idaho)

SKU: UE-03212020A

Picture Framing Equipment Lot / Framing Business

Machine and supplies can be purchased separately. 

Equipment that you need to start a production picture framing business.  Great for an additional location or new business venture!

From the seller: “All equipment in this lot are in good working condition unless specified differently.”

Lot Price & Business Price: Call

Machines can be purchased individually. See below for pricing:

UE-032120A-1 CTD D45AX14 Double Mitre Saw  $ 6,000  
UE-032120A-2 CTD D45AX14 Double Mitre Saw  $ 6,000

Blades Size: 14″

Each Saw Includes: Dust Collector,  Pneumatic Holddowns, Infeed, Outfeed Measuring table, and Air Stop as shown in listing photos.

*** Manufacturer’s Information:

CTD D45AX14 Frame & Notching Saw

The CTD 400 Series Cut Off Saws are designed for heavy duty production cutting of aluminum, wood, plastics and steel. These rugged, heavy duty machines offer years of precision cutting.

Specifications:  Fixed Head Double Mitre Saw , Blade Capacity: 14″, 2 H.P. 1 or 3 phase, Magnetic Starter, 3450 RPM, Cutting Capacity: 14″: 4″ X 2.5″ or 2″X6

  • Blade Capacity: 5/8″ 16mm with 2-1/4″ 57mm saw collars.

Arbor:  1″ 25mm with 5″ 127mm saw collars.

Spindle & Pivot: Both mounted on pre-loaded and sealed ball bearings.

Iron Castings:  Saw arm, pivot brackets and table are precision machined and ground with milled slots in table to guide pivot brackets and fences.

Motor & Voltages:  1-1/2 H.P. single phase 115/230 Volt and 3 phase 230/460 Volt, Totally Enclosed Fan Cooled Motors, 60 Hz, 3450 RPM with Dual Magnetic Starter. Consult factory for amerage load of motors.

Table Height: 34-1/2″ 88cm from floor.

Air Pressure: 75 PSI 5.4 kg/cm2 with Air Filter/Regulator/ Lubricator; includes Auto Drain.

Floor Stand:  Close coupled heavy gage steel stand completely enclosed with 6″ dust outlet. 1200 CFM required.

Blade Wear & Angular Adjustments:  Each saw head has adjustments for blade variation. Allows for precision alignment of blades to minimize scrap. Saw heads are adjustable up to 3°, always assuring perfect mitres.

Length of Stroke Adjustment: The D45AX is unique in that the stroke of the machine and the position of the blade above the work can be adjusted to use only the stroke needed to cut a particular moulding or extrusion. Saw heads reverse immediately, thereby saving wasted time and motion.

Production Rate: The D45AX is capable of cycling at one second intervals. However, actual production rates vary with the type and width of material to be cut.

Size:  Standard machine, without tables or gages; Weight 550 lbs. 250kg; 46″ 117cm Wide x 22″ 56cm front to back x 51-1/2″ 131cm High.

Crated Size: 45″ 114cm Wide x 28 -1/2″ 72cm front to back x 60″ 152cm High.

Actuation: Pneumatic foot valve with cover.

Air Consumption: 1.0 CF per 10 strokes at 75 PSI .043 cubic meters per minute at 5.4 kg/cm2.

UE-032120A-3 ITW AMP Mitre-Mite  Vn4+MP Vnailer  $ 5,500
(Fletcher AMP U500, Alfamacchine U500)
Programmable Joiner / Underpinner
Includes a supply of nails

***Manufacturer’s Information:

Fletcher U500 (formerly called: ITW AMP VN4MP)

For high volume production pre-programmed sequences of operation,

Holds approx 2000 frame profiles in memory with 3000 frame memory, memory expansion optional, bar code option, one touch recall, operator programmable, joins all woods, MDF, and plastic, designed for ease of use, particularly well suited for the custom frame shop, compact and well constructed for years of trouble free operation, quiet and powerful, comes on compact base which can be set on or notched into work station and has 3 operating positions, two stage foot pedal allows user to see quality of join before nailing, nail head remains stationary while moulding moves, stacks up to 10 position per corner, has a pneumatic load/feed system to eliminate jams, drives at 110 psi, adjusts to join almost any profile from 1/4 inch to 5 1/4 inches high, and from to 3/8 inch to 5 inches wide, air and electronically operated, basic machine is 29 inches wide x 25 inches long x 55 inches high, FEATURES: recalls at the touch of a button, optional bar code reader, computer electronic controls with manual back-up. fast and easy nailing position set up, double hydraulic hold down clamps available, multi angle adjustable back fence with tilt adjustment for 4, 6 or 8 sided frames, accommodates 5 nail height sizes, built in reserve air tanks for consistent operating pressure, comes with large assortment of special hold down clamps for almost any profile.

UE-032120A-4 Gunnar 601RS  CMC Mat Cutter  $ 19,000

Computerized Mat Cutter

Used by Picture Framers to Cut Matboard

Size: 40 x 60″

Includes: Computer, Monitor, and Software

Installation and training available: Call for pricing

*** From the manufacturer:

The Gunnar 601-RS CMC is the “Next Generation ” in computerised mat cutting. The Gunnar 601-RS computerised mat cutter is the proven and tested winner when it comes to reliability and efficiency in framing businesses around the globe.

This computerized cutter does outstanding clean cuts at a fast pace. Multi-cuts, double mats, angel, round anything is possible. Software saves past projects for easy and simple recall. Makes quick work of big orders. Very adjustable for foam board to hard museum mat board.

Key Features

Extremely simple operation
Adjustable cutting table angle
Cuts the hardest museum mat board up to 3.5 mm
Central control unit with pressure gauge, start and emergency-stop button
Double cutting head for 45 degree and 90 degree cutting
45 degree head auto adjustable for two mat thickness
COE Mode to operate two working areas simultaneously
Blade change in a matter of seconds without tools
Modular design for simple service
Ideal for continuous operation
Finger clamp system for cuts to the edge of the mat board


  • Swiss precision – The Gunnar 601’s Swiss design and engineering leads the market in superior reliability and accuracy. The Gunnar 601-RS is unmatched in features. 
  • Two cutting heads – With the double cutting head, multiple production mats can be cut “edge to edge” with a straight cut, saving time, wastage and with a professional square edge. 
  • Cuts to the edge – The Gunnar 601’s unique button clamping system allows you to cut to the extreme edge of the matboard, with no wastage.

 40” x 60” table size – You can confidently cut mats in oversized matboard.

 Cuts foamboard – Cut foamboard up to 5mm thick for backings, with a perfectly square edge.

 Split clamping zones – Double your production with “left-right” split clamping operation, with two separate cutting zones utilized by a single operator.

 Automatic blade depth – With the ability to cut combined v-grooves and openings in one step, there is no need for adjustment or blade change when cutting these mats. This feature also allows you to cut mass produced double mats in the one step.

 Fast – With a cutting speed of 1000mm/second, the Gunnar 601-RS is faster than any other competitor CMC sold in Australia.

 Adjustable table angle – No gravity related problems with off-cuts slipping down and interrupting subsequent cuts.

Non-warp – Non-warp honeycomb aluminum base board.

 Tool-free blade change – Easily change the blade in a matter of seconds.

 Designed by framers for framing – Intuitive design and operation, which is easy to understand for anyone with a picture framing background.

 New generation microstepper motors – The drive system is accurate to 0.02mm per step.


 No start-finish marks – Only Gunnar guarantees absolutely no start finish marks in circles and ovals.

 No hooking – Only Gunnar guarantees no hooking or curved cuts, regardless of the thickness, brand or density of your matboard.

Computerised Mat Board Processing Equipment

UE-032120A-5a  Drytac / Tullis Russell HGP 360 Hot / Cold Glass Vacuum Press   $ 3,000

UE-032120A-5b  Drytac / Tullis Russell HGP 360 Hot / Cold Glass Vacuum Press   $ 3,000

Includes: pump & stand, as well as supply of  mounting material as shown in the photo.

*** Manufacturer’s Information

Drytac HGP360- Hot Press™ Glass Top Vacuum Press (Heated) with pump (Replacement cost: $7,995)

Does mounting, matting, laminate, canvas transfers, encapsulate large and small format graphics, etc. A highly adaptable machine that is ideal when the job size varies or when many different types of finishing jobs are required. The design requires no special set up for different jobs, making them the tool of choice when different sizes or different type of finishing requirements are needed. The see-through tempered glass heating technology provides accurate temperature control over the entire heating area and also provides a high degree of user confidence as the mounting job can be viewed throughout the process. Includes automatic electronic timer with a manual override and vacuum adjustment capability.

Overall Size:  HGP560 –  46″ deep x 70″ wide x 38″ tall  (1194mm x 1800mm)

Diaphragm Working Area:  HGP360 –  42.5″ x 66.5 “ (1080mm x 1689mm)

Time to Vacuum: HGP360 30 sec.

Time to Temp: HGP360 – 12 min.

Voltage:  220V Single Phase; 50/60Hz

Wattage: HGP360 – 4.2 kW

Current: HGP360 – 18 Amp.

Weight Net / Shipping: HGP360 – 111 Kg (244 lbs.) / 145 Kg (320 lbs.)

UE-032120A-6   Fletcher 3000 60″ Multi Material Cutter  $ 750

UE-032120A-7   Fletcher 3000 60″ Multi Material Cutter  $ 750


***From the manufacturer:

The 3000 is the ideal product to make short work of the critical task of preparing your materials for framing. With its simplistic design and user-friendly cutting head, you will see an immediate improvement in accuracy and productivity in the first day of use. Our versatile 3000 unit features a three position cutting turret for glass, acrylics and mat board sizing. Equipped with a patented score and break-out feature, the 3000 unit provides effortless and operator-safe cutting with every use.

Available in 48″ (1219mm) or 60″ (1524mm) vertical cutting capacity.

Manufacturer’s Information:

The Fletcher 3000® Wall Machine has a proven track record of success in frame shops worldwide. With its innovative and patented cutting process, the 3000 provides effortless cutting of the materials that matter to you most. The 3000 has quickly become the standard in picture framing for sizing of matboard, foamboard,glass and plastics; all with equal accuracy and consistency.

Patented glass cutting turret has a ramping feature that allows the lifting of turret device on top edge of glass resulting in a cleaner edge break.

Wall mounted or free-standing

Substrate Cutting Capabilities:

Glass: Up to 1/4″ (6 mm)

Mirror: Up to 1/4″ (6 mm)

Acrylic: Up to 1/4″ (6 mm)

Matboard: 4, 8, 12 ply

Foamboard: Up to 1/4″ (6 mm)

Technical Specifications:

Vertical Cutting Capacity: 60″ (1.52m)

Cutting Head: Rides on high tensile strength steel, hard chrome plated and polished, resulting in smoother gliding action for consistent cutting head performance and longevity.

Vertical Bars: Rails do not bend or flex during the cutting process for straight, accurate cutting over the entire substrate height.

Material Clamping System: Patented lever-type clamping system that secures in place substrate heights up to 60″ (152cm) to prevent buckling and shifting of material during the cutting process.

Machine Dimensions:

Height: 72″ (183 cm)

Width: 80″ (203 cm)

Depth: 11.64″ (30 cm)

Weight: 70 lbs. / 32 kg

Cut Capacity: 60″ (152 cm)

Needed Wall Space: 36.38 sq. ft.

Shipping Weight: 110 lbs./ 49 kg

UE-032120A-8   Safety Speed Vertical Panel Saw  $ 750

***From the manufacturer& web:


Featuring a heavy duty worm drive motor, additional steel frame supports, aluminum wheels and double bearings, this machine will deliver an accuracy of 1/64″. The 6400 can handle 64″ wide sheets while the 6800 can cut sheets up to 74″ without blinking an eye.

Standard Equipment

  • 3 Hp worm driven heavy-duty saw motor.
  • 10 ft. welded steel frame.
  • Chrome-plated 1 3/4″ guide tubes.
  • 8 Nylatron roller bearing systems.
  • Adjustable vertical and horizontal rulers.
  • Quick change from vertical to horizontal cutting.
  • Thin material pressure guard.
  • Solid aluminum material rollers.
  • Enclosed counterweight system.
  • Integrated dust collection bonnet.
  • Extended warranty.
  • TUV certified to UL/CSA standards.


  • Max. Crosscut:  74″/1850mm
  • Max. Rip Cut:  Unlimited
  • Max. Cut Thickness:  1-3/4″/45mm
  • Cut Accuracy, Straight and Square:  1/64″/.4mm
  • Saw Blade Diameter:  8″/210mm
  • Motor:  13 amp, 120V
  • Frame Length:  120″/3050mm
  • Shipping Weight:  660lbs
  • Shipping Dimensions:  124″ x 17″ x 98″


UE-032120A-10  Potdevin W36 Rotary Press  $ 3,500

Size: 36″

Includes stand


***From the manufacturer:

Excellent for high-speed laminating of glued materials, flexible or rigid, up to a half inch in thickness. Uses include chipboard to chipboard, litho labels to chipboard or corrugated boxes. Adjustable pressure.

UE-032120A-11 Jyden Foot Chopper $ 700

Includes in-feed &  measuring table & stop as shown in the photo

Manufactured in Denmark

*** From the manufacturer & web:

mitring machine cuts double mitre at 45°

When using the chopper you will have no dust compared to a saw. Also, the waste of your moulding will be minimized. The mitre saw cannot do the mitres as close

Chopper  leaves the cut surface of the wood perfectly smooth and accurate, requiring no further preparation before joining. The horizontal movement of the knife block is stepwise adjustable. The sliding longitudinal stop and measuring scale ensure accurate repeat work.

Return springs automatically bring the knives back to starting position.

  • UE-032120A-13     HP Latex 365 64″ Wide Format Printer   $8,000    

From the seller: “It is only about a year old. Has had light use.”

*** Manufacturer’s Information & from Web:

List $13,995

The HP 360 Latex Printer will print indoor and outdoor high quality prints on a range of media types including textiles. Control the HP360 using its 8 inch touchscreen control panel and monitor print jobs remotely with HP mobile app. High-quality, durable prints provide scratch resistance comparable to hard-solvent inks.


  • Print indoor and outdoor prints
  • Print on a range of media types
  • Upto 64 inch printouts
  • High quality
  • Print Speed: 334 ft2 /hr
  • Automatic take up reel
  • 8 inch touchscreen control panel
  • 6 ink cartridges

Print on traditional signage substrates and beyond – up to 64” – including textiles. Enjoy efficient, automated double-sided banner printing, and produce consistent, repeatable image quality with high-efficiency curing, 6 colors, and 1200 dpi. In additional, you will be able to reach new new indoor spaces that solvent can’t, like healthcare as water-based HP Latex Ink prints are odorless.

Enjoy high speeds of 334 ft²/hr high-speed outdoor quality with HP OMAS, HP Latex Optimizer. Reach production speeds and avoid wait time – prints come out completely dry and ready to finish and deliver. Reduce time between jobs with continuous printing.

With HP Latex Technologies, you can produce traditional signage jobs and explore new revenue streams with an extensive range of application offerings. This includes outdoor and event banners; point of purchase posters; vehicle graphics; backlits; textiles; decoration applications; and much more.

Deliver more high-quality applications same-day, in widths up to 64” all while keeping costs low. The HP Latex 300 Printer and water-based HP Latex Inks ensure rich blacks and glossy results—and all prints emerge dry, odor-free, and ready to use.

  • UE-032120A-14     Cannon imagePROGRAFF iPF8400 Wide Format Printer   $2,000 
  • *** Manufacturer’s Information:

Professional Photo & Fine Art

List $7,995

Built for ultra high quality imaging and exceptional performance, the imagePROGRAF iPF8400 44″ large format printer is equipped with an array of professional features. An incredibly large color spectrum is produced by the 12-Color LUCIA EX pigment ink set, which also provides better scratch resistance and smoother gradations. The new Multi-sensor included with this printer provides improved color density detection and allows for a full calibration to be completed within 15 minutes, with the ability to use non-Canon branded media. A new Color Calibration Management System allows for color calibration targets to be created using the iPF6450 with optional spectrophotometer and shared across all new iPFX400 12-color printers, and the included software allows for all printers on the network to be monitored from one central location. In highest print mode, the order of ink application and layering is optimized to maintain the highest print quality with fewer passes, making this mode twice as fast compared to previous models. The iPF8400 is also equipped with a large 250GB hard drive, geared to increase productivity in high volume printing and streamlined workflows, while allowing for faster processing of large files as well as the ability to reprint jobs directly from the printer.

  • UE-032120A-15     Model 64C 64″ Wide Format Cold Roll Laminator   $2,000 

UE-032120A-16  Picture Frame Moulding Lot   $ Call for price  

Total lot: 378,000 + Linear Feet

Wood : Moldurarte – Manufactured in Brazil

Polystyrene (Poly) – TS Moulding (This is a denser poly. Holds as much as wood)

Link: Moulding Inventory Sheet per SKU #



UE-032120A-9 Potdevin NTZ36 Cold Gluer  $ 5,500  (Sold)

Size: 36″

Includes stand


*** From the manufacturer:

The Potdevin NTZ Gluer saves time and energy. Uniformly coats smooth or uneven materials up to half inch thick with water-based glues, latex and resins. Use with paper, cardboard, leather, plastic, foam, wood, fabric, rubber. Used with cold glues only.


UE-032120A-12     Tensador II T-155 Canvas Stretching Machine    $1,500  (Sold)

Used by framers and artist to gallery stretch art canvases

Size: 60″

Includes: Pneumatic Staple Gun, Staples as shown in photo.

*** Manufacturer’s Information:

Tensador II T-155G+  (Replacement price: $3,525)

Tensador II G+ is a simple effective devise that insures proper and uniform tension of canvas. Tensador II G+ is designed to stretch canvas from 8″ x 8″ through 60″ x 60″.  Pneumatic air filter controller and foot activated safety pedal assures safe and reliable operation.

Stretching canvas has never been so quick and easy. Tensador II G+ is designed for stretching giclee canvas, canvas transfers and oil paintings. The, unique clamping mechanism firmly grips canvas without harmful piercing.

The unique gallery wrap on the Tensador II G+ provides access to the back side of the stretcher bar. This operation requires a staple gun with a long nose to reach the back side of the bar. Gallery wrap or stapling on the back side of the stretcher requires 1 ½” for canvas past the back side of the stretcher bar to staple on the side 3/8” is required. . The Tensador II G+ can accommodate most any commercial stretcher bar size from ½” – 2 ½” thick.

The Tensador II G+ solves the wide range of finishing requirements, square or tapered corners or supported or open backs.

The canvas image is visible during stretching operation assuring accurate location of image and reduced reject or re-makes.

A small footprint of Tensador II G+ easily adapts to current plant finishing areas and conserved table space for final finishing.

Minimal adjustments are required for canvas size changes resulting in higher production when stretching multiple size images or bar sizes. Greater machine versatility and low operator training cost.

Pneumatic operation is reliable and requires no electrical needs. Tensador II G+ uses plant or dedicated air systems. Silent air systems are available. Built in the USA, you always have direct conversation with the manufacture, to address any operation or parts concerns. Sold throughout the world and shipped by UPS or Fedex for quick economical delivery.

These items can be picked up in Idaho or shipped for an additional fee.
***  It is the buyer’s responsibility to check with manufacturer for any difference between the machine being sold and what is stated in the manufacturer’s website.  Although we strive for accurate information, all equipment is sold “As Is”. 
Catalog Item #


Condition of Item

All used items are sold “As Is”. There are no implied warranties or guarantees. Statement of condition is provided to us by the seller. Although we strive to obtain the best information from the seller, AIM is not responsible for inaccuracies provided to us by seller. It is the responsibility of the buyer to inspect machinery; crosscheck with seller or manufacturer regarding descriptions and specifications that appear in this listing.

Date of Initial Listing

March 21, 2020


, Western USA




There are no reviews yet.

Be the first to review “Picture Framing Equipment Lot / Framing Business (used) Item # UE-03212020A (Idaho)”

Your email address will not be published. Required fields are marked *