Picture Framing Equipment Lot: Eclipse Mat Cutter, CTD Saw, Mitre Mite Vnailer & Supplies

From the seller: "I was the owner operator of my shop. All the equipment is well maintained and in good working order. "

Lot Price: $ Call for Pricing
Machines can be purchased individually. See below for pricing.

UE-101520G-2 CTD D45 Double Miter Saw$ 1,995

From the manufacturer:
CTD D45 Fixed 45 Degree Frame Saw
The D45 is popular world wide because of its unique features, low cost and precision. Engineered for higher production, this double mitre saw makes two 45 degrees mitres at one time, saving time and materials. D45's are used by thousands in the decorative arts trade throughout world.
Designed to cut Aluminum, Wood, plastics, composites, aluminum extrusions, plastic extrusions, non-ferrous metals.
Blade Capacity: 10" OD (254mm) ,12'' OD, 14'' OD
Spindle & Pivot: Both mounted on pre-loaded and sealed ball bearings.
Arbor: 5/8 (16mm) with 2-1/4 (57mm) saw collars.
Iron Castings: Saw arm, pivot brackets and table are precision machined and ground with milled slots in table to guide pivot brackets and fences.
Motors & Voltages: 1-1/2 H.P., 3450 RPM with Dual Magnetic Starter.
Table Height: 34-1/2 (88cm) from floor.
Floor Stand: Close coupled heavy gage steel stand completely enclosed with 6 dust outlet. 1200 CFM required.

• Length of stroke adjustment: The D45AX is unique in that the stroke of the machine and the position of the blade above the work can be adjusted to use only the stroke needed to cut a particular moulding or extrusion. Saw heads reverse immediately, on release of the foot valve, thereby saving wasted time and motion.
• Production Rate: The D45AX is capable of cycling at one second intervals. However, actual production rates vary with the type and width of material to be cut.
• Size: Standard machine, without tables or gages; weight 550 lbs. 46'' wide x 22'' front to back x 51-1/2'' high.
• Actuation: Pneumatic foot valve with cover
• Air Pressure: 75 PSI with Air Filter/Regulator/Lubricator; includes Auto Drain.
• Air Consumption: 1.0 CF per 10 strokes at 75 PSI.

UE-101520G-5 Challenge Diamond  34" Paper Cutter
Size: 34"

UE-101520G-6 C&H Advantage Pro 48" Mat Cutter $ 350
From the Manufacturer:

C+H M48 PRO Mat Cutter

The C+H Advantage Pro Mat Cutter is a precision high-quality mat cutter. A self-adjusting margin guide and production stops reduce overcuts and increase efficiency in picture framing.

Product features

• Bowed bar and rod assembly, allowing for uniform pressure along mats when cutting.
• Sturdy, warp-resistant baseboard.
• Adjustable, pivoting mounted assembly.
• Mat guide and slide plate to control the width.
• High build quality for long service life and consistent performance.

We offer three models of the C+H Advantage Pro Cutter – each of which includes the following blades:

• (10) #1200 Blades
• (10) #1500 Blades
• (10) #1200SE Blades
• (5) #1991 Utility Blades

Overall Length: 54 ½"
Overall Width: 15 3/8"
Board Capacity: 49 ½"
Cutting Capacity: 48"

UE-101520G-7 ITW AMP Fillet Cutter $ 150 each
There are 2 cutters available.

UE-101520G-8 Pneumatic Point Drivers $ 200 for the set
Includes boxes of points
2 Available

UE-101520G-9  Dahle 45" Professional Guillotine Paper Cutter $250

UE-101520G-10 ITW AMP Miter Disc Sander$ 350
 
From the manufacturer:

Fletcher ITW AMP / Alphamacchine Miter / Mitre Mitre-Mite  Disc Sander

A precision sanding tool for the Custom Framer.  With this tool, you can accurately true a corner by simply rotating the 12" sanding disc against the miter cut.  This allows for perfect corners when joining and therefore a quality frame every time.

Our Disc Sander is the perfect tool to "true up" rough cuts, angle corrections, and length variances on moulding corners. It ensures perfect alignment with every joined corner.

Simply rotate the 12-inch sanding disc manually against the miter cut, creating perfect corners.  The Disc Sander comes with a 45-degree template for accurate setting, three sanding disks, a cleaning stick, and a set of Allen wrenches.

The base of the Disc Sander includes mounting holes that allows the unit to be secured to any work table for added rigidity.

The Disc Sander weights 40 lbs. (18 kg) and measures 12" x 12" x 4" (305mm x 305mm x 102mm) table-top foot print.

It is an indispensable shop tool and provides a higher level of quality and craftsmanship in your finished product.

 
UE-101520G-1 Eclipse 4060 Pro CMC Mat Cutter $ 4,500 (Sold)
Includes: Computer, Monitor, Keyboard, Mouse
From the seller " The Eclipse is a 4060 pro, maintained and serviced by 'THE CMC DOCTOR.' and has the latest software/computer upgrades."
*** From the Manufacturer:

Below is information for the Eclipse Pro from Manufacturer's website:

Complete mat cutting solution includes:
• Mat Designer software
• Solid Steel Construction
• Modular Design
• Mat Clamping System
• Brushless Servo Motors

Hardware Features
• Durable steel design
• Independent cylinder air clamp system
• Cut speed of 20 inches per second (ips)
• Cuts any type of matboard including 8-ply, 6-ply, paper, rag, suede, linen, color core, metallic matboard

Software Features
•Nesting enables you to layout and cut multiple mat designs on one sheet of matboard. Nest mat designs inside the openings of larger designs to reduce waste.
• Design complex, multiple layer and multiple opening designs from the front or back
• Place v-grooves around any opening
• Cut any mat design as a reverse bevel
• Easy layout with one-click alignment
• Create custom designs
• Adjust reveals to any width

 
UE-101520G-3 ITW AMP VN42 Frame Joiner $ 1,200 (Sold)
Includes: Heads and extra boxes of vnails as shown
From manufacturer's website:

The Mitre-Mite VN 42 has been designed for ease of operation and is particularly well suited for assembling larger frames. This machine comes with a height adjustable base and has a convenient tilt / roll feature which allows for easy movement around the shop. it can be operated from the front or back and has a dual stage foot pedal which allows the Framer to see if the corner is properly aligned before nailing. After the Framer sets the stops, the hand lever is then used to position the nail head for driving or stacking V-Nails anywhere along the frame joint.

Specifications:

MACHINE SIZE:

Width 14"

Length 19"

Height 33" to 43"

Weight 150 lbs.

POWER SOURCE: Pneumatic

FRAMING CAPABILITY:

Frame Width 3/8" to 5 1/2"

Frame Height 1/4" to 41/2"

Tilt/Angle fence for custom fit

4 , 6, or 8 sided frames.

V-NAIL SIZES: 3, 5, 7, 10, 12, 15 mm

OPTIONAL ACCESSORIES:

Wood support table

Metal extension wings

 
UE-101520G-4 Fletcher - Terry 3100 Multi Material Cutter $ 850 (Sold)
***Manufacturer's Information:

Fletcher 3100 Multi-Material Cutter will cut hardboard, Gator board, foam board, and mat board, and will score glass and plastic. Our versatile 3100 Multi-Material Cutter features a spring-loaded cutting assembly with an interchangeable pillar post allowing you the convenience of quickly switching from one material to another.

Wall-mounted machine available in 63" cutting capacity

Cuts matboard and foamboard and up to 1/2" (12.7mm) thick

Cuts hardboard (MDF) up to 3/32" (2.4mm)

Scores glass and plastic up to 1/4" (6.35mm)

Fletcher 3100 Multi-Material Cutter will cut hardboard, Gator board, foam board, and mat board, and will score glass and plastic.

Interchangeable Cutting Head Technology

Cuts clean, debris-free, no secondary processing

Optional laser sight line for accurate cutting

Mounts on wall or free-standing

Cuts wide range of substrates

Substrate Cutting Capabilities:

Glass Up to 1/4" (6mm)
Plastics & Acrylics Up to 1/4" (6mm)
Aluminum Sheets Up to .040"
MDF Up to 3/32" (2.4mm)
ACM Up to .078" (2mm)
Gator Board Up to 1/2" (13mm)

Technical Specifications:

Vertical Cutting Capacity: 63" (1.6m)

Cutting Head: Rides on high tensile strength steel, hard chrome plated and polished, resulting in smoother gliding action for consistent cutting head performance and longevity.

Vertical Bars: Rails do not bend or flex during the cutting process for straight, accurate cutting over the entire substrate height.

Material Clamping System: Patented lever-type clamping system that secures in place substrate heights up to 60" (152cm) to prevent buckling and shifting of material during the cutting process.