*** From the manufacturer & web:

Pistorius Model MN-200

…for cutting wood, aluminum, plastics and fiberglass

Specifications:Blade Capacity: 12″Blade Arbors: 5/8″Maximum Cutting Height: 2-5/8″Maximum Cutting Width: 3-3/8″Motor HP: 1.5(Each)Electrical: 220/440V(Wired 220)/3PH2-5/8″ Max. height & 3-5/16″ max. width cap, (2) 1.5HP, 230/460V, 3,450RPM Motors, 12″ blade diameter capacity, 5/8″ diameter belt driven saw arbors, Non-staggered blade movement – not for notching, only approx. 7″ of travel is necessary to complete the stroke of the saw blades, Simultaneously cuts a left and right 45 degree miter with each cycle of the machine thus wasting little material. Leaves hands free to hold the material. Easy to regulate the cutting speed. The counterbalanced saw heads return automatically. The saw blades extend beyond the fence line when cycling, cutting completely through the material. Foot pedal operated, actuated by air. Scrap discharges to the bottom of the machine. Air filter, regulator, lubricator, Magnetic push button starters.

AGFS-16b  Pistorius MN200 Double Mitre Saw (green blade cover) : $1,500

***Manufacturer’s & Other General Descriptions from the web:

Pistorius Model MN-200 (MN 200) for wood, aluminum, plastics and fiberglass

2-5/8″ Max. height & 3-5/16″ max. width capacity

2 x 1.5HP, 230/460V, 3,450RPM Motors,

12″ blade diameter capacity,

5/8″ diameter belt driven saw arbors,

Non-staggered blade movement (not for notching), only approx. 7″ of travel is necessary to complete the stroke of the saw blades, Simultaneously cuts a left and right 45 degree miter with each cycle of the machine thus wasting little material. Leaves hands free to hold the material. Easy to regulate the cutting speed. The counterbalanced saw heads return automatically. The saw blades extend beyond the fence line when cycling, cutting completely through the material.

Foot pedal operated, actuated by air.

Scrap discharges to the bottom of the machine.

Air filter, regulator, lubricator, Magnetic push button starters

***Manufacturer’s Information:

The Mitre-Mite VN 42 has been designed for ease of operation and is particularly well suited for assembling larger frames. This machine comes with a height adjustable base and has a convenient tilt / roll feature which allows for easy movement around the shop. it can be operated from the front or back and has a dual stage foot pedal which allows the framer to see if the corner is properly aligned before nailing. After the framer sets the stops, the hand lever is then used to position the nail head for driving or stacking V-Nails’ any where along the frame joint.

MACHINE SIZE: Width 14″ / Length 19″ / Height 33 to 43″” / Weight 150 lbs

Power Source: Pneumatic

FRAMING CAPABILITY: Frame Width 3/8″ to 6 1/2″ / Frame Height 1/4″ to 4 1/2″

NAIL SIZES: 3, 5, 7, 10, 12, 15 mm

OPTIONAL ACCESSORIES: Wood Support Table, Metal extension wings,

***From the manufacturer:The 3000 is the ideal product to make short work of the critical task of preparing your materials for framing. With its simplistic design and user-friendly cutting head, you will see an immediate improvement in accuracy and productivity in the first day of use. Our versatile 3000 unit features a three position cutting turret for glass, acrylics and mat board sizing. Equipped with a patented score and break-out feature, the 3000 unit provides effortless and operator-safe cutting with every use.

Available in 48″ (1219mm) or 60″ (1524mm) vertical cutting capacity.

Manufacturer’s Information:

The Fletcher 3000® Wall Machine has a proven track record of success in frame shops worldwide. With its innovative and patented cutting process, the 3000 provides effortless cutting of the materials that matter to you most. The 3000 has quickly become the standard in picture framing for sizing of matboard, foamboard,glass and plastics; all with equal accuracy and consistency.

Patented glass cutting turret has a ramping feature that allows the lifting of turret device on top edge of glass resulting in a cleaner edge break.

Wall mounted or free-standing

Substrate Cutting Capabilities:

Glass:   Up to 1/4″ (6 mm)

Mirror:  Up to 1/4″ (6 mm)

Acrylic:  Up to 1/4″ (6 mm)

Matboard:  4, 8, 12 ply

Foamboard:  Up to  1/4″ (6 mm)

Technical Specifications:

Vertical Cutting Capacity: 60″ (1.52m)

Cutting Head: Rides on high tensile strength steel, hard chrome plated and polished, resulting in smoother gliding action for consistent cutting head performance and longevity.

Vertical Bars: Rails do not bend or flex during the cutting process for straight, accurate cutting over the entire substrate height.

Material Clamping System: Patented lever-type clamping system that secures in place substrate heights up to 60″ (152cm) to prevent buckling and shifting of material during the cutting process.

Machine Dimensions:

Height: 72″ (183 cm)

Width: 80″ (203 cm)

Depth: 11.64″ (30 cm)

Weight:  70 lbs. / 32 kg

Cut Capacity: 60″ (152 cm)

Needed Wall Space: 36.38 sq. ft.

Shipping Weight: 110 lbs./ 49 kg

AGFS-16f   Canvas Stretcher  $ Call for Pricing