Picture Framing Equipment Lot: Wizard 8000 CMC Mat Cutter and Mitre Mite VN42 Vnailer

UE-021920A-1 CTD D45X Double Miter Saw $ 1,795 (Reflects New Price drop!!!)

(SOLD)

Includes: Measuring Table, and Dust Collector

***Manufacturer's Information:

Manufacturer's Website: http://ctdsaw.com - Instruction manual can also be found here:

CTD D45AX Fixed 45 Degree Frame Saw

The D45 is popular world wide because of its unique features, low cost and precision. Engineered for higher production, this double mitre saw makes two 45 degrees mitres at one time, saving time and materials. D45's are used by thousands in the decorative arts trade throughout world.

Designed to cut Aluminum, Wood, plastics, composites, aluminum extrusions, plastic extrusions, non-ferrous metals.

Blade Capacity: 12'' OD

Spindle & Pivot: Both mounted on pre-loaded and sealed ball bearings.

Arbor: 5/8 (16mm) with 2-1/4 (57mm) saw collars.

Iron Castings: Saw arm, pivot brackets and table are precision machined and ground with milled slots in table to guide pivot brackets and fences.

Motors & Voltages: 1-1/2 H.P., 3450 RPM with Dual Magnetic Starter.

Table Height: 34-1/2 (88cm) from floor.

Floor Stand: Close coupled heavy gage steel stand completely enclosed with 6 dust outlet. 1200 CFM required.

Length of stroke adjustment: The D45AX is unique in that the stroke of the machine and the position of the blade above the work can be adjusted to use only the stroke needed to cut a particular moulding or extrusion. Saw heads reverse immediately, on release of the foot valve, thereby saving wasted time and motion.

Production Rate: The D45AX is capable of cycling at one second intervals. However, actual production rates vary with the type and width of material to be cut.

Size: Standard machine, without tables or gages; weight 550 lbs. 46'' wide x 22'' front to back x 51-1/2'' high.

Actuation: Pneumatic foot valve with cover

Air Pressure: 75 PSI with Air Filter/Regulator/Lubricator; includes Auto Drain.

Air Consumption: 1.0 CF per 10 strokes at 75 PSI.

UE-021920A-2 Wizard 8000 CMC Mat Cutter $ 2,000

Includes Stand & Computer, Monitor, and Software (contact Wizard any licensing fees to re-register machine)
Does not include controller / control box

***Manufacturer's Information:

An economical and efficient mat cutting solution that allows custom framing businesses to cut more and cut faster.

Some of the features our CMC Model 8000 offers:
- Cut speed of 7.5 inches per second
- 45 degree standard bevel cartridge
- Optional debossing package with three cartridge options for pressing subtle designs into mats: thin, medium and wide
- MatDesigner software

UE-021920A-3 Mitre Mite VN42 Vnailer $1,500

(SOLD)

Link to Video of Machine in Operation - Mitre Mite VN42 Vnailer

From the Seller (2-20-23): "Just invested $600 into refurbishing machine. It is now in good working order. This is the work I had done on the
machine:
- Replace drive cylinder
- Drive cylinder gasket kit
- Vertical cylinder gasket kit
- New pressure regulator
- Replace pneumatic hoses and fittings
- Replace 3 pneumatic control valves
I have over $700 in material and labor getting the machine up to speed. I do need to disclose that I was having intermittent problems getting the machine to drive the nails. After discussing with my repair guy, I am relatively certain that the problem is due to using off brand v-nails. I have a bunch of v-nails that are designed for a South Korean underpinner that I have and they appear to be a little off and sometimes the VN 42 misses driving them. Technician is available for any questions regarding joiner."

***Manufacturer's Information:

The Mitre-Mite VN 42 has been designed for ease of operation and is particularly well suited for assembling larger frames. This machine comes with a height adjustable base and has a convenient tilt / roll feature which allows for easy movement around the shop. it can be operated from the front or back and has a dual stage foot pedal which allows the framer to see if the corner is properly aligned before nailing. After the framer sets the stops, the hand lever is then used to position the nail head for driving or stacking V-Nails any where along the frame joint.

Machine Size: Width 14" / Length 19" / Height 33 to 43" / Weight 150 lbs
Power Source: Pneumatic
Framing Capability: Frame Width 3/8" to 6 1/2" / Frame Height 1/4" to 4 1/2"
Nail Sizes: 3, 5, 7, 10, 12, 15 mm
Optional Accessories: Wood Support Table, Metal extension wings

UE-021920A-4 PPFE 1000 Pneumatic Vnailer $ 750

(NO LONGER AVAILABLE)

Model: 1000

***Manufacturer's Information:

PPFE 1000 Pneumatic Underpinner, (formerly FS 1000) by Professional Picture Frame Equipment

The Professional Picture Frame Equipment 1000 underpinner is simple to use and very affordable. This powerful underpinner is for the framer that wants to make just a few frames a day..or the framer that wants a fast production machine.

UE-021920A-5 Fletcher Terry 2100 48" Mat Cutter $ 600

(SOLD)

Includes: Squaring Arm & Production Stops

***Manufacturer's Information:

Fletcher-Terry 2200 Mat Cutter

Professional level mat or mount board cutter for creating bevels and producing V-Grooves as decorative features and finishes in matboard up to 4-ply. Features a dual cutting feature for matboard specialty cutting or a 90 degree cutting feature for sizing matboard or cutting of foamboard up to 1/2" (13mm). Available machine sizes, 48" (1.2m) or 60" (1.5m).

Besides being used at many global custom frame shops, the 2200 is a great investment and business expansion tool for sign companies, photo studios, boutique shops, quick printers, and arts & crafts shops.

Our Fletcher 2200 mat cutter provides specialty cutting for creating bevels and producing v-grooves in mat board used for picture framing and art / graphics retail matting.

Performance Features:

- Manual mat cutting for sizing cuts, cutting bevels and producing v-grooves.
- Cuts 4-ply mat board.
- Straight line cutting of foam board up to 1/2" (13 mm).
- Maximum material cutting thickness: 1/2" (13mm), 90 degrees cut only.
- Available machine sizes: 48" (1.2m) and 60" (1.5m).
- Used by picture framers & artist

UE-021920A-6 C&H Thumbnail Master Router / Joiner TN1000M $ 500

(SOLD)

Model: TN1000M
Includes 6 bags of thumbail inserts that appears in the photo!

***Manufacturer's Information:

CH Thumbnailer Model: TN1000M

Used for joining mitered moulding like picture frames

Includes the following inserts: 3/8" (100 count bag), 5/8" (100 count bag), 15/16" (100 count bag)

Includes: Set of motor wrenches

Includes: Router bit

Description:

The C&H Thumbnail Master is a popular thumbnail router with framing businesses, large and small. It is very versatile and easy to use. The Thumbnail Master joiner provides routing of thumbnail channels at 6 depth capabilities, all easily set on an easy-to-read dial. It can do thumbnailing of mouldings up to 1 7/8" deep and has a changeable clamping height which can hold mouldings from 1/2" to 3 3/4" tall. It has an easy grip guide handle and ratcheted bit handle for simple adjustment of the routing bit.

UE-021920A-7 Husky Air Compressor

(SOLD)

UE-021920A-8 Assorted Moulding $ 2,500

(NO LONGER AVAILABLE)

Assorted Omega Mouding
Estimated 20,000 Linear Feet