Catalog

Picture Framing Equipment Lot (used) Item # UE-031020E (New York)

$375.00

SKU: UE-031020E

Picture Framing Equipment Lot

Lot Price: $  375  (For what is left – Vnailer)

Available Items in Lot:

  • SKU # UE-031020E-3 Pistorius Manual Vnailer / Joiner / Underpinner

Sold Items in Lot:

  • SKU # UE-031020E-1 Vacuseal 5298H Dry Mount Press
  • SKU # UE-031020E-2 Morso Chopper
  • SKU # UE-031020E-4 Neschen International K 1250 Cold Laminator

From the seller “All machines are in good working order unless otherwise specified below. “

Machines can be purchased as a lot or individually.  See below for individual item pricing.


UE-031020E-1 Vacuseal 5298H Dry Mount Press  $ 3,500 (Sold)

Includes foam overlay, most of a roll of mounting tissue, and most of a roll of release paper.
From the seller: “Last used about 6 months ago, this press does need a new heating element in its left third, but everything else functions as it should.”
(Note: Heating element is available for purchase from this catalog. Item # NFE-299a   Replacement Heater  $601.45)
*** Manufacturer’s Info:

The Seal 5298H Vacuum Dry Mount Press is another leap forward for the Seal/Bienfang company. As the leading company for photo finishing and mounting, Seal has produced a dry mount press that also pre-dries your board, thereby saving time. This press can handle big jobs and handles multiple pieces at the same time.

Bienfang Vacuum Presses are designed to automatically control the four main variables of mounting: moisture, pressure temperature and time. This assures consistent results. There are two simple ways to operate the Vacuum Press: by setting each control individually or by using convenient programmed settings. Some settings are preset at the factory but you can also set your own programs for procedures you conduct repeatedly.

Platen temperature is maintained at +/- 2° F of the set temperature.

Touch-pad controls assure consistency and are user friendly

Easy-read digital displays

Programmable System Controller with 6 factory-installed programs for temperature and dwell time

End-of-cycle signal

Sturdy Dura-Box alloy frame provides a tight vacuum seal and extra durability

Space-saving work surface

Maintenance-free vacuum

Built-in floor stand


UE-031020E-2 Morso Chopper  $ 800 (Sold)
Includes measuring deluxe measuring scale / table & stop, and an extra set of blades
Serial # 60106

*** From the manufacturer:

Morso Model F Mitering Machine (Price new is $3,500 USD / about $4,500 CAD)

Morso Model F mitring machine cuts double mitre at 45° and single mitre up to 90°. Tenon, mortise joints, and a wide variety of angled cuts can also be made.

When using the Morso F, you will have no dust compared to a saw. Also, the waste of your moulding will be minimized as Morso F cuts double mitres very close, ( less than one mm waste of moulding ).

The mitre saw cannot do the mitres as close, and therefore the waste by using a saw, will always be minimum one centimetre.

One centimetre of waste does not sound of much, but if a calculation is done of 100 cuts a day, it actually turns out that the waste over a year is 260 meters waste of moulding…. ( That is only with 100 cuts a day…)

Morso F leaves the cut surface of the wood perfectly smooth and accurate, requiring no further preparation before joining. The horizontal movement of the knife block is stepwise adjustable. The sliding longitudinal stop and measuring scale ensure accurate repeat work.

The special lever system of the machine ensure a very easy operation. Twin return springs automatically bring the knives back to starting position.

Morso F is delivered with safety guard, waste chute, sliding longitudinal stop, measuring scale, adjustable fences ( 45° – 90° ), and adjustable rebate supports.

Morso F is manually operated with a foot pedal – needs no compressor or electricity and can therefore be operated anywhere.

Technical data for
Morso Model F Mitring Machine
Double mitre 45°
Single mitre up to 90°
Cutting width, max. 100 mm
Cutting height, max. 160 mm
Square cutting 65/65 mm
Measuring scale up to 1,500 mm
Net weight 90 kg


UE-031020E-3 Pistorius Manual Vnailer / Joiner / Underpinner  $ 375

Pistorius Model VNM

Includes a supply of vnails.


UE-031020E-4 Neschen International K 1250 Cold Laminator  $ 600 (Sold)

Size: 60” x 51”x 35”

Includes about a third of a roll of laminating paper

From the seller ” It is in good working order. Last used 9 months ago. It can roll on both sides so you can double laminate things too. “


These items can be picked up in New York or shipped for an additional fee.


***  It is the buyer’s responsibility to check with manufacturer for any difference between the machine being sold and what is stated in the manufacturer’s website.  Although we strive for accurate information, all equipment is sold “As Is”. 
Catalog Item #

UE-031020E

Condition of Item

Used
All used items are sold “As Is”. There are no implied warranties or guarantees. Statement of condition is provided to us by the seller. Although we strive to obtain the best information from the seller, AIM is not responsible for inaccuracies provided to us by seller. It is the responsibility of the buyer to inspect machinery; crosscheck with seller or manufacturer regarding descriptions and specifications that appear in this listing.

Date of Initial Listing

March 10, 2020

Location

New York

Reviews

There are no reviews yet.

Be the first to review “Picture Framing Equipment Lot (used) Item # UE-031020E (New York)”

Your email address will not be published.