Catalog

Picture Framing Equipment Lot: Vacuseal 4468H Press, Morso Chopper, Fletcher 3000 Cutter & Supplies (Used) Item # UE-062921C (Tennessee)

SKU: UE-062921C

Picture Framing Equipment Lot: Vacuseal 4468H Press, Morso Chopper, Fletcher 3000 Cutter & Supplies

From the seller: “All equipment in this lot are in good working condition unless otherwise specified below.”

Machines can be purchased individually.  See below for pricing.

UE-062921C-2  Morso DK8900 F Chopper
From the seller: “Comes with an extra set of blades and both sets were recently professionally sharpened. Owner’s manual included.” 

*** From the manufacturer:

Morso Model F Mitering Machine (Price new is $4,000 USD / about $5,100 CAD)

Morso Model F mitring machine cuts double mitre at 45° and single mitre up to 90°. Tenon, mortise joints, and a wide variety of angled cuts can also be made.

When using the Morso F, you will have no dust compared to a saw. Also, the waste of your moulding will be minimized as Morso F cuts double mitres very close, ( less than one mm waste of moulding ).

The mitre saw cannot do the mitres as close, and therefore the waste by using a saw, will always be minimum one centimetre.

One centimetre of waste does not sound of much, but if a calculation is done of 100 cuts a day, it actually turns out that the waste over a year is 260 meters waste of moulding…. ( That is only with 100 cuts a day…)

Morso F leaves the cut surface of the wood perfectly smooth and accurate, requiring no further preparation before joining. The horizontal movement of the knife block is stepwise adjustable. The sliding longitudinal stop and measuring scale ensure accurate repeat work.

The special lever system of the machine ensure a very easy operation. Twin return springs automatically bring the knives back to starting position.

Morso F is delivered with safety guard, waste chute, sliding longitudinal stop, measuring scale, adjustable fences ( 45° – 90° ), and adjustable rebate supports.

Morso F is manually operated with a foot pedal – needs no compressor or electricity and can therefore be operated anywhere.

Technical data for
Morso Model F Mitring Machine
Double mitre45°
Single mitre up to90°
Cutting width, max.100 mm
Cutting height, max.160 mm
Square cutting65/65 mm
Measuring scale up to1,500 mm
Net weight90 kg
UE-062921C-3  Fletcher – Terry 3000 60″ Multi Material Cutter 

***From the manufacturer:

The 3000 is the ideal product to make short work of the critical task of preparing your materials for framing. With its simplistic design and user-friendly cutting head, you will see an immediate improvement in accuracy and productivity in the first day of use. Our versatile 3000 unit features a three position cutting turret for glass, acrylics and mat board sizing. Equipped with a patented score and break-out feature, the 3000 unit provides effortless and operator-safe cutting with every use.

Available in 48″ (1219mm) or 60″ (1524mm) vertical cutting capacity.

Manufacturer’s Information:

The Fletcher 3000® Wall Machine has a proven track record of success in frame shops worldwide. With its innovative and patented cutting process, the 3000 provides effortless cutting of the materials that matter to you most. The 3000 has quickly become the standard in picture framing for sizing of matboard, foamboard, glass and plastics; all with equal accuracy and consistency.

Patented glass cutting turret has a ramping feature that allows the lifting of turret device on top edge of glass resulting in a cleaner edge break.

Wall mounted or free-standing

Substrate Cutting Capabilities:

Glass: Up to 1/4″ (6 mm)

Mirror: Up to 1/4″ (6 mm)

Acrylic: Up to 1/4″ (6 mm)

Matboard: 4, 8, 12 ply

Foamboard: Up to 1/4″ (6 mm)

Technical Specifications:

Vertical Cutting Capacity: 48″

Cutting Head: Rides on high tensile strength steel, hard chrome plated and polished, resulting in smoother gliding action for consistent cutting head performance and longevity.

Vertical Bars: Rails do not bend or flex during the cutting process for straight, accurate cutting over the entire substrate height.

Material Clamping System: Patented lever-type clamping system that secures in place substrate heights up to 48″ to prevent buckling and shifting of material during the cutting process.

UE-062921C-4  Cassese CS89 Joiner / Vnailer / Underpinner
***Manufacturer’s Information:

The CS88 & CS89 have been the most popular models in the world for over 15 years, and thus their reputation and reliability are proved. Although manufactured to the highest standards, the prices of the CS88 & CS89 remain very competitive.

FEATURES OF THE CS88 & CS89 :
• Cassese wedges cartridge system
Easy change of wedge size with no need to adjust or change any part
on the machine. All Cassese underpinners are able to use the full range
of Cassese cartridge wedges in 7 different sizes, available in both
softwood and hardwood.
•Adjustable joining angle
It is possible to adjust the joining angle of the fences to correct the gap
if the cutting angle is not perfectly at 45°.
• Patented self-adjusting fences
Are adaptable to the shape of any moulding profile, to prevent gaps in
the top or bottom of the join.
• Horizontal rebate clamp
Secures the moulding pieces together to ensure perfect alignment of the
mitres while joining.
• Quick-Change top clamp
To adjust between softwood and hardwood and different mouldings’
shapes.
• 2 positioning stops
(front and back) allow wedges to be stacked up, even in hardwood.
• Unique triangular design table
Makes it easy to adapt to the corner of a workbench, which assists in
supporting the frame while joining.
• CS 88 Foot operated
Mobile foot pedal
The pedal position can be easily changed between the back or the front
of the machine, and can also be set up for either left or right foot
operation.
Unique pulley and cable drive system
Multiplies the force applied on the foot pedal more than 3 times, thus
making it easy for the operator to drive wedges into the hardest timbers.
• CS 89 Air operated :
Pneumatic double-stage pedal
Permits the operator to clamp the mouldings and visually check the join
before inserting the wedge.
No pressure adjustment required
When changing between softwood and hardwood.

Mouldings
Width 5mm-95mm
Height 7mm-85mm
Smallest internal frame size 70mm x 70mm
Dimensions
Length 450mm
Width 600mm
Height 1090mm
Weight 25 Kg 31 kg
Air supply nil 6 bars using
3 litres / cycle

 

UE-062921C-5  Hansen Chopper Blades
UE-062921C-6 Framer’s Work Tables
There are two tables available.
UE-062921C-1  Vacuseal 4468H Dry Mount Press  $3,500 Sold
Includes stand with birch shelving and owner’s manual.
Approximate size – 6’4”L x 4’4”W x 3’H

*** Manufacturer’s Information:

Vacuum Press is the preferred choice of professionals. The Vacuum Press offers a space-saving work surface and the option of processing several pieces of varying size and thickness simultaneously. Complete with digital display and touch pad controls, it is guaranteed to provide years of service with its durable framework and built-to-last construction.

Includes value supply package

Price does not include stand

Expression® Vacuum Presses
The Expression® Vacuum Press is the preferred choice of professionals. The Vacuum Press offers a space-saving work surface and the option of processing several pieces of varying size and thickness simultaneously. Complete with digital display and touch pad controls, it is guaranteed to provide years of service with its durable framework and built-to-last construction. Owning a D&K Expression® Press includes D&K Technical Support for all of your application and equipment needs.
Applications:
Cold mounting
Laminating
Heat mounting
Appling texture
Pre-Drying Materials
Operational Features:
Eliminates pre-drying steps
Available in three sizes (3648H, 4468H, 5298H)
Dura-Box alloy frame with tight vacuum seal
Space-saving work surface
Maintenance-free vacuum pump
Programmable system controller with factory-installed programs for temperature and dwell time
Easy-read digital display
Touch-pad controls
End-of-cycle signal

Customers can pick these items up in Tennessee or have them shipped for an additional fee.
  • *** Although we strive for accuracy, some specifications are provided to us by seller. It is a good idea to double check specifications by manufacturing company for possible errors of information. Check with manufacturer for any difference between the machine being sold and what is stated in the manufacturer’s website.  Feel free to call us if you have further questions before purchasing.

Catalog Item #

UE-062921C

Condition of Item

Used
All used items are sold “As Is”. There are no implied warranties or guarantees. Statement of condition is provided to us by the seller. Although we strive to obtain the best information from the seller, AIM is not responsible for inaccuracies provided to us by seller. It is the responsibility of the buyer to inspect machinery; crosscheck with seller or manufacturer regarding descriptions and specifications that appear in this listing.

Date of Initial Listing

June 29, 2021

Location

Tennessee

Reviews

There are no reviews yet.

Be the first to review “Picture Framing Equipment Lot: Vacuseal 4468H Press, Morso Chopper, Fletcher 3000 Cutter & Supplies (Used) Item # UE-062921C (Tennessee)”

Your email address will not be published. Required fields are marked *