Equipment Lot: Fletcher ITW AMP U500 / VN4MP Programmable Vnailer / Joiner, Fletcher - Terry 3000 Multi Material Cutter, Panel Saw, Crown Forklift, Quickcorner Picture Frame Corner Protector Maker Machine, Yale Pallet Jack, Atlas Copco Air Compressor, Atlas Copco GX5 Air Compressor, Thumbnailer Router, Framing Vises, CTD D45 Double Miter Saw, Pistorius EMN-14 Double Miter Saw, Universal AW-180 / DY103 Double Miter Saw, Bulk Lot Moulding: ROMA, OMEGA, UNIVERSAL / ARQUATI, DECOR, Pistorius MN-300 Double Miter Saw, Guardian Floor Scale w/ Transcell Model TI-500E Indicator

UE-122321A-1 Fletcher ITW AMP U500 / VN4MP Programmable Vnailer / Joiner

(SOLD)

***From the Manufacturer:

Our U-500 is recommended for high-volume production facilities that require the primary use of a single sized V-Nail for frame joining. The U-500 has the same user-friendly, touch screen interface as our U-600 Underpinner. The only difference between the two models being the U-500 has single channel capacity compared to a multi-channel with the U-600 unit.
With data storage of 5,000 different frame profiles, the operator can easily recall any frame profile alphabetically, numerically or by using the bar code reading option.
The U-500 is equipped with both a horizontal and vertical clamping mechanism to securely hold the moulding during the V-Nail insertion process.
The Fletcher AMP U 500 / VN4 MP has been designed for production shops which need to change over frequently. Its memory program technology is" state of the art" allowing profile data for up to 1,400 frames to be entered or downloaded from PC. Once this information is stored, the operator then brings up the next frame to be produced or scans with the optional bar code reader. This machine will automatically adjust and production can restart immediately! V-Nails can be driven or stacked in up to 10 positions per corner. This machine is very fast and easily drives all types of wood, plastic and MDF. Other features include a pneumatic load / feed system to eliminate jams and clamping fixtures to fit most profiles including a double hydraulic hold down for wider shaped frames.

Unique Performance Features:
- User friendly touch-screen P.C. operation with data storage for 5,000 frame profiles
- Integrates Bar Code Scanner option for production efficiency
- Equipped with a vertical, double hydraulic pressure clamp
- Features a three knob adjustment fence for compensating moulding cuts
- Join either from front or back of machine
- Easy table tilt adjustment
- Machine handles all types of wood, plastics, and MDF materials

Frame Joining Capabilities:

- Moulding Width (min to max): 1/4" up to 4 1/2" (6-105 mm)
- Moulding Height (min to max): 1/4" up to 3 1/4" (6-80 mm)
- Max Distance Between V-Nails (stroke): 5 3/4" (145 mm)
- Pre-set V-Nail Position Stops: Multiple
- V-Nail Sizes: 5mm, 7mm, 10mm, 12mm, 15mm (SW-HW-HDF)
- V-Nail Channel Capacity: 220 V-Nails/channel

UE-122321A-2 Fletcher - Terry 3000 Multi Material Cutter

(SOLD)

***From the Manufacturer:

The Fletcher 3000® Wall Machine has a proven track record of success in frame shops worldwide. With its innovative and patented cutting process, the 3000 provides effortless cutting of the materials that matter to you most. The 3000 has quickly become the standard in picture framing for sizing of matboard, foamboard, glass and plastics; all with equal accuracy and consistency.
Patented glass cutting turret has a ramping feature that allows the lifting of turret device on top edge of glass resulting in a cleaner edge break.
Wall mounted or free-standing

Substrate Cutting Capabilities:

- Glass:   Up to 1/4" (6 mm)
- Mirror:  Up to 1/4" (6 mm)
- Acrylic:  Up to 1/4" (6 mm)
- Matboard:  4, 8, 12 ply
- Foamboard:  Up to  1/4" (6 mm)

Technical Specifications:

- Vertical Cutting Capacity: 48"
- Cutting Head: Rides on high tensile strength steel, hard chrome plated and polished, resulting in smoother gliding action for consistent cutting head performance and longevity.
- Vertical Bars: Rails do not bend or flex during the cutting process for straight, accurate cutting over the entire substrate height.
- Material Clamping System: Patented lever-type clamping system that secures in place substrate heights up to 48" to prevent buckling and shifting of material during the cutting process.

UE-122321A-3 Panel Saw

UE-122321A-4 Crown Forklift

(SOLD)

UE-122321A-5 Quickcorner Picture Frame Corner Protector Maker Machine

This machine makes the cardboard corner protectors used to protect picture frames
Manufacturer: Quickcorner, inc. Corona, CA

UE-122321A-6 Yale Pallet Jack

UE-122321A-7 Atlas Copco Air Compressor

UE-122321A-8 Atlas Copco GX5 Air Compressor

(SOLD)

UE-122321A-9 Thumbnailer Router

(SOLD)

UE-122321A-10 Framing Vises

(SOLD)

There are four vises available.

UE-122321A-11 CTD D45 Double Miter Saw $1,500

(SOLD)

***From the Manufacturer:

CTD D45X Frame & Notching Saw
4" wide x 2.375" high cutting capacity
12" Diameter saw blade capacity with 5/8" diameter saw arbor
(2) 1-1/2 HP Belted Motor Drive Saw motors
(2) Pneumatic horizontal clamps
Keyed fences, adjustable front to rear
Air cylinder with adjustments for speed, stroke length, and position of blade above work
Foot pedal control

CTD Model D45AX fixed 45 degree double mitre cut off saw
10" blade compacity
1.5 H.P 3 Phase 230 Volt TEFC Motors
Standard Machine Includes:
Foot Valve Actuation; FR Unit with Auto Drain
Dual Magnetic Starter; 6" Dust Collector Outlet
Disconnect Switch and Blade Guard interlocks switch
Verticle 3" stroke clamps
Vision Gauge 6" x 6′ Long Assy – right w/ Support Table
5′ Extended Table work support – Left
CTD 10" at 80 tooth x 5/8" arbor carbide blades

UE-122321A-12 Pistorius EMN-14 Double Miter Saw $3,000

Includes Measuring table & Air Stop
Blade size: 14"

***From the Manufacturer:

Pistorius EMN14 Saw

Specifications:

- Blade Capacity: 14"
- Maximum Cutting Height: 5"
- Maximum Cutting Width: 6"
- Motor HP (2): 2
- Electrical: 230/460V(Wired 230)/3PH
- Dust Outlet (2): 4"
- Variable Speed Pneumatic Feed Down for Saw Blades,
- Foot Pedal
- (2) 14" Blades
- Side Scrap Discharge Chute
- Safety Guards
- Approx. Shipping Weight: 1750 Lbs.
- Approx. Shipping Dimensions: 48" L x 48" W x 59" H

UE-122321A-13 Fletcher ITW AMP U500 / VN4MP Programmable Vnailer / Joiner

(SOLD)

From the Seller: "This VN4MP was just recently serviced an in good working order"

***From the Manufacturer:

Our U-500 is recommended for high-volume production facilities that require the primary use of a single sized V-Nail for frame joining. The U-500 has the same user-friendly, touch screen interface as our U-600 Underpinner. The only difference between the two models being the U-500 has single channel capacity compared to a multi-channel with the U-600 unit.
With data storage of 5,000 different frame profiles, the operator can easily recall any frame profile alphabetically, numerically or by using the bar code reading option.
The U-500 is equipped with both a horizontal and vertical clamping mechanism to securely hold the moulding during the V-Nail insertion process.
The Fletcher AMP U 500 / VN4 MP has been designed for production shops which need to change over frequently. Its memory program technology is" state of the art" allowing profile data for up to 1,400 frames to be entered or downloaded from PC. Once this information is stored, the operator then brings up the next frame to be produced or scans with the optional bar code reader. This machine will automatically adjust and production can restart immediately! V-Nails can be driven or stacked in up to 10 positions per corner. This machine is very fast and easily drives all types of wood, plastic and MDF. Other features include a pneumatic load / feed system to eliminate jams and clamping fixtures to fit most profiles including a double hydraulic hold down for wider shaped frames.

Unique Performance Features:
- User friendly touch-screen P.C. operation with data storage for 5,000 frame profiles
- Integrates Bar Code Scanner option for production efficiency
- Equipped with a vertical, double hydraulic pressure clamp
- Features a three knob adjustment fence for compensating moulding cuts
- Join either from front or back of machine
- Easy table tilt adjustment
- Machine handles all types of wood, plastics, and MDF materials

Frame Joining Capabilities:

- Moulding Width (min to max): 1/4" up to 4 1/2" (6-105 mm)
- Moulding Height (min to max): 1/4" up to 3 1/4" (6-80 mm)
- Max Distance Between V-Nails (stroke): 5 3/4" (145 mm)
- Pre-set V-Nail Position Stops: Multiple
- V-Nail Sizes: 5mm, 7mm, 10mm, 12mm, 15mm (SW-HW-HDF)
- V-Nail Channel Capacity: 220 V-Nails/channel

UE-122321A-14 Universal AW-180 / DY103 Double Miter Saw

(SOLD)

***From the Manufacturer:

Standard Features and Specifications:

- 14" blades, 1" spindles with 1-1/2 hp., 220-volt single-phase motors and vertical clamps as standard equipment.
- Dual air cylinders mean the blades can be lowered individually or together.
- Cuts profiles 3-1/2" high x 6-1/2" wide depending on the shape. A large blade and center pivot means wide cuts.
- Cycle speed should be one to two seconds per cycle. Actual production rates vary based on moulding width and hardness.
- External dust collector system is standard equipment.

UE-122321A-15 Bulk Lot Moulding: ROMA, OMEGA, UNIVERSAL / ARQUATI, DECOR

Inventory List Appears in Photos

UE-122321A-16 Pistorius MN-300 Double Miter Saw

(SOLD)

From the Seller: "In good working order"

Power: 3 PH / 460 V
Includes in-feed table, measuring table, and air stop.

***From the Manufacturer:

- (2) 1.5 HP motors, 208-230/460V 3 Phase
- 2-5/8" max height and 4" max width capacity
- 14" blade diameter
- 5/8" diameter belt driven saw arbors
- Foot pedal operated, actuated by air
- Air filter, regulator, lubricator
- Magnetic push button starters
- Weight: 700 lbs.

UE-122321A-17 Guardian Floor Scale w/ Transcell Model TI-500E Indicator $500

Size 5 x 5'
Industrial Floor Scale System
Capacity 5000 lbs.