Equipment Lot: Hoffmann MU2P Router, Hoffmann MORSO Beaded Face-frame Notching Machine, & Holz-Her 1265S Supercut Heavy Duty Vertical Panel Saw

UE-010322B-1 Hoffmann MU2 Bench Top Dovetail Routing Machine

(SOLD)

***Manufacturer's Information:

Hoffmann MU2 Bench-Top Routing Machine

Manufacturer's video: HERE

The Hoffmann MU2-P bench-top routing machine is equipped with a high speed router motor, located at the center of the machine. The supplied 45 degree fence plate, which is guided in a keyway in the machine
table, is used to accurately position the material on the table. The location of the dovetail slot for the Hoffmann Dovetail Key is adjusted by simply moving this fence plate. Once set, the plate is locked in place and the routing sequence can begin. The machine is equipped with a pneumatic pedal that starts the routing process. Upon depressing the foot pedal, the routing sequence is initiated:

- pneumatic clamp secures workpiece on machine table
- router head advances until the pre-set height position is reached
- router head returns to base position
- pneumatic clamp releases work piece

Output is approx. 16 routing strokes per minute, which translates into 2 completely processed rectangular frames. These numbers include material handling, but obviously depend on routing depth, feed speed, material flow and operator performance as well. Flow control valves on the main pneumatic cylinder allow the operator to adjust the upward and downward feed rate independently, depending on the material being processed. On its backside, the large heavy-duty cast aluminum machine base has a 1 3/4" diameter dust collection port to connect a shop vacuum for dust free operation.The supplied outer bit is solid tungsten carbide, made to exacting specifications. Depending on the routing depth and the material to be routed, the useable cutter life is approx. 10,000 strokes. Every machine is shipped with a tool kit and set-up jig, which allows a router, bit change in only minutes. Diamond tooling is also available.

Features
- Air regulator
- Air filter
- Oil lubricator assembly
- W-2 carbide router bit
- Standard 45 degree fence plate and square top installed

UE-010322B-2 Hoffmann MORSO Beaded Face-frame Notching Machine

Brand: Hoffmann
Model: NFX 71950
Year Manufactured: 1999

From the Seller: "Very good working condition."

***Manufacturer's Information:

The MORSO NFL notching machine is a heavy-duty, foot pedal operated notching machine for the production of beaded face-frames, French-mitered cabinet doors as well as muntin and mullion joints. This manual model will accept moulding up to 2 3/4" wide, allowing the operator to process many types of standard face frame moulding, except wider bottom and top rails.
The machine features a heavy-duty steel frame with cast iron tabletop. The vertical travel of the cutting head, which is also made of cast-iron, can be adjusted depending on work-piece thickness, assuring comfortable operation.
Factory-fitted cast-iron extensions tables for left and right side are included and so is a full set of MORSO U-channel fences and flip-stop (optional DGS 1000 fence system is a popular upgrade).

MORSO NFL Standard Features:

MORSO NFL series foot operated notching machines for beaded face-frames include:

- safety guard
- scrap chute
- four short-arm flip-stops and two long-arm flip-stops
- left and right hand side cast iron table extensions
- left and right hand side aluminum fence rails
- one set of original MORSO side knives, factory ground and honed
- one 3/4" wide nose knife and one 1" wide nose knife, factory ground and honed
- detailed instructions incl. parts diagrams

UE-010322B-3 Holz-Her 1265S Supercut Heavy Duty Vertical Panel Saw

Brand: Holz-Her
Year Manufactured: 1999

From the Seller "Good condition. HOLZ-HER 1265S Vertical Panel Saw with SUPERCUT With scoring, 75" x 169" cap., 4 HP motor, 2" depth of cut, 220 mm (8-5/8") dia. saw blade @ 6,640 RPM; saw head rotates 90° for rip or crosscutting; automatically moving back grid w/interlocks. Year 1999, 230 VOLT, 3-PHASE."