Equipment Lot: Morso Chopper, Seal Masterpiece 500T-X Dry Mount Press, Fletcher 3100 Cutter & Supplies (Used) Item # UE-042822A (Texas)
Item Is
No Longer
Available
Equipment Lot: Morso Chopper, Seal Masterpiece 500T-X Dry Mount Press, Fletcher 3100 Cutter & Supplies (Used) Item # UE-042822A (Texas)
Equipment Lot: Morso Chopper, Seal Masterpiece 500T-X Dry Mount Press, Fletcher 3100 Cutter & Supplies (Used) Item # UE-042822A (Texas)
Equipment Lot: Morso Chopper, Seal Masterpiece 500T-X Dry Mount Press, Fletcher 3100 Cutter & Supplies (Used) Item # UE-042822A (Texas)
Equipment Lot: Morso Chopper, Seal Masterpiece 500T-X Dry Mount Press, Fletcher 3100 Cutter & Supplies (Used) Item # UE-042822A (Texas)
Equipment Lot: Morso Chopper, Seal Masterpiece 500T-X Dry Mount Press, Fletcher 3100 Cutter & Supplies (Used) Item # UE-042822A (Texas)
Equipment Lot: Morso Chopper, Seal Masterpiece 500T-X Dry Mount Press, Fletcher 3100 Cutter & Supplies (Used) Item # UE-042822A (Texas)

Used

Equipment Lot: Morso Chopper, Seal Masterpiece 500T-X Dry Mount Press, Fletcher 3100 Cutter & Supplies

SKU: UE-042822A
Manufacturer: Equipment Lot
Date listed: April 28, 2022

Picture Framing Equipment Lot: Morso Chopper, Seal Masterpiece 500T-X Dry Mount Press, Fletcher 3000 Cutter & Supplies

 

Available Items in Lot:
  • All of the items in this lot have been (SOLD)

 

Sold Items in Lot:
  • SKU # UE-042822A-1 Morso Chopper
  • SKU # UE-042822A-2 Seal Masterpiece 500T-X Dry Mount Press (SOLD)
  • SKU # UE-042822A-3 Fletcher - Terry 3100 Multi Material Cutter (SOLD)
  • SKU # UE-042822A-4 Fletcher - Terry 2100 Mat Cutter (SOLD)
  • SKU # UE-042822A-5 Taurus 2KSX Pneumatic Vnailer (SOLD)

 

From the Seller: "All equipment in this lot are in good working condition unless otherwise specified below."

 

*Items in this lot can be purchased individually or as a grouping.

GET PRICING

About this Item

Features & Specifications

UE-042822A-1 Morso Chopper
(SOLD)

From the Seller: "Plus Ten Miter Chop, 10" taller than old morsos. Like new, extra blades."

***Manufacturer's Information:

Morso Model F Mitering Machine

Morso Model F mitring machine cuts double mitre at 45° and single mitre up to 90°. Tenon, mortise joints, and a wide variety of angled cuts can also be made.

When using the Morso F, you will have no dust compared to a saw. Also, the waste of your moulding will be minimized as Morso F cuts double mitres very close, (less than one mm waste of moulding.)

The mitre saw cannot do the mitres as close, and therefore the waste by using a saw, will always be minimum one centimetre.

One centimetre of waste does not sound of much, but if a calculation is done of 100 cuts a day, it actually turns out that the waste over a year is 260 meters waste of moulding! That is only with 100 cuts a day!

Morso F leaves the cut surface of the wood perfectly smooth and accurate, requiring no further preparation before joining. The horizontal movement of the knife block is stepwise adjustable. The sliding longitudinal stop and measuring scale ensure accurate repeat work.

The special lever system of the machine ensures a very easy operation. Twin return springs automatically bring the knives back to starting position.

Morso F is delivered with safety guard, waste chute, sliding longitudinal stop, measuring scale, adjustable fences (45° x 90°), and adjustable rebate supports.

Morso F is manually operated with a foot pedal, needs no compressor or electricity and can therefore be operated anywhere.

Technical data for Morso Model F Mitring Machine
- Double mitre: 45°
- Single mitre: up to 90°
- Cutting width, max.:100 mm
- Cutting height, max.: 160 mm
- Square cutting: 65/65 mm
- Measuring scale up to: 1,500 mm
- Net weight: 90 kg


UE-042822A-2 Seal Masterpiece 500T-X Dry Mount Press
(SOLD)

***From the Manufacturer & Web:

Seal Masterpiece 500T-X. It is Seal's largest format mechanical press and used by framing professionals. Applications for this press include mounting, laminating and applying texture to large photos, artwork and posters.

Designed to consistently provide even heat and pressure for creative dry mounting and laminating by framing professionals.

Ideal applications for this press include creative dry mounting, laminating and applying texture to artwork of all shapes and sizes.

Press is simple to operate when you are dry mounting, laminating, or backing prints, photos, posters, maps, charts or any frequently handled item which you would like to protect and preserve. They are durable and allow maximum pressure because of their rugged metal construction.

Working area: 26" x 34" can take work up to any length

Overall Dimensions (LxWxH): 37" x 39" x 12"

Net Weight 210 lb. (125kg)

Shipping Weight 275 lbs

Specifications

- 26" x 34" Platen Size
- Solid State Thermostat for Accuracy and Electrical Economy.
- Easy Reading Thermostat
- Mount up to 52" x Infinity
- Shipping Weight - 275 lbs.
- Power Requirements - 120 Vac 12 Amps


UE-042822A-3 Fletcher - Terry 3100 Multi Material Cutter
(SOLD)

***Manufacturer's Information:

The Fletcher 3100 Multi-Material Cutter is a versatile Wall Cutter designed with an interchangeable cutting head platform that uses multiple cutting blades, scoring tips and cutting wheel holders for cutting and scoring a large variety of materials. Handles material sheets up to 63"" high (1.6m) and features an acrylic breakout function. Mounts on wall or freestanding installation.

Multi-Material Cutting Capabilities:
- Glass Up to 1/4" (6mm)
- PVC Up to 1/4" (6mm)
- Plastics & Acrylics Up to 1/4" (6mm)
- Aluminum Sheets Up to .040"
- MDF Up to 3/32" (2.4mm)
- ACM Up to .078" (2mm)
- Gator Board Up to 1/2" (13mm)

Unique Performance Features:
- Interchangeable Cutting Head Technology
- Cuts clean, debris-free, no secondary processing
- Mounts on wall or free-standing
- Cuts wide range of substrates

Tech Specs & Dimensions:
- Vertical Cutting Capacity: 63" (1.6m)
- Cutting Head: Rides on high tensile strength steel, hard chrome plated and polished, resulting in smoother gliding action for consistent cutting head performance and longevity.
- Vertical Bars: Rails do not bend or flex during the cutting process for straight, accurate cutting over the entire substrate height.
- Material Clamping System: Patented lever-type clamping system that secures in place substrate heights up to 60" (152cm) to prevent buckling and shifting of material during
the cutting process.

Wall Mounting Specs & Dimensions:
- Height: 78" (241cm)
- Width: 80" (203cm)
- Depth: 17" (43 cm)
- Weight: 90 lbs (41kg)
- Wall Space: 42.6 sq. ft. (3.96sqm)
- Cut Capacity: 63" (160cm)
- Shipping Weight: 100 lbs. (45kg)


UE-042822A-4 Fletcher - Terry 2100 Mat Cutter
(SOLD)

***Manufacturer's Information:

Fletcher-Terry 2200 Mat Cutter

The Fletcher 2200 Mat Cutter is a professional level mat or mount board cutter for creating bevels and producing V-Grooves as decorative features and finishes in matboard up to 4-ply. Features a dual cutting feature for matboard specialty cutting or a 90° cutting feature for sizing matboard or cutting of foamboard up to 1/2" (13mm). Available machine sizes, 48" (1.2m) or 60" (1.5m).

Besides being used at many global custom frame shops, the 2200 is a great investment and business expansion tool for sign companies, photo studios, boutique shops, quick printers, and arts & crafts shops.

Performance Features:

- Cuts 8-ply mat, gator, and form board
- Maximum Material Cutting Thickness: 1/2" (13mm)
- Three different blades are available: .012", .015" and 90 degree blade
- Sight Gage on the cutting head provides precise control of over/under cuts when using pencil lines on the back of the mat
- Cutting blades are held by removable magazines – permits quick, safe, interchangeability and cutting depth adjustments
- Ball bearings glide the cutting head along the hardened aluminum bar clamp for cutting ease
- Two large adjustable Delrin bushings fit the head firmly to the chrome plated steel shaft – eliminates right and left head movement and hooked cuts
- A pin locator system and mat gauge provides accurate and repeatable settings for mat borders
- Machine base is made from anodized aluminum and will not warp or flex during the cutting process


UE-042822A-5 Taurus 2KSX Pneumatic Vnailer
(SOLD)

***Concerning "Used" Items: Although we strive for accuracy, some specifications are provided to us by the Seller. Cross-check with manufacturer for any difference between the machine being sold and what is stated in the manufacturer's information. Descriptions of condition of the equipment are not warranties. Descriptions are intended only as a courtesy and their accuracy is not guaranteed. Buyer inspection encouraged. There are no warranties or guarantees implied unless otherwise stated. All items are sold "As Is, Where Is, and With All Faults." No guarantee is made as to fitness for a particular purpose, implied or otherwise. Feel free to contact us if you have further questions before purchasing.

Pricing & Shipping

Interested in the product? Fill out the form or call us at 330-405-9421 for pricing and other information.

Product is located in Texas. Customers can pick the machine up or have it shipped for an additional fee.

  • Do not include +1 country code. If outside of USA, please include phone number in message box.

Can't Find the Equipment You Need?

We're constantly getting new listings. Let us know what you're looking for and we'll notify you when the equipment is available.