Equipment Lot: OMEC 750 Dovetail Machine, Brandt Edgebander, Grizzly Sander, & SCM Planer

• 
  
  UE-072921E-1 OMEC 750 Dovetail Machine
  
  
  
  
  From the seller " Works great! Our application has changed and no longer need"
  
  
  
  
  Manufactured 1997
  
  
  
  
  
  
  ***Manufacturer?s Information:
  
  The OMEC 750 is utilized to indent dovetails for drawers and various furniture elements. The machine is equipped with a mill spindle which allows machining of indents of adjustable height. The 750 model can machine single male or female work pieces, or both simultaneously. The locking and release of the pieces takes place manually by means of pneumatic valves. The machine can work at two different feed speeds. Controls are located on a built-in control panel
  * Eccentric HHS mill cutter assembled on the machine
  * Plates Kit for indent break
  * 1.1 KW, approximately 1.5 HP (1) spindle motor runs at 18,500 RPM
  * 1.1 KW, approximately 1.5 HP feed drive motor
  * Dimensional limits of workpieces: Length 7-7/8? (200mm) ? 59? (1500mm); Width 2-3/8? (60mm) ? 18-7/8? (480mm); Indent Height ?? (6mm) ? 11/16? (18mm); Front thickness .275? (7mm) ? 2-3/8? (60mm); Side thickness 3/8? (10mm) ? 1-1/8? (30mm)
  
  Drawer joint milling machine OMEC 750
  The machine is designed to perform connections, among others drawers, boxes. The operator gives two elements to be joined at the same time, then the machine automatically mills the entire length
  
  machine dimensions: 1300x700x1200h mm
  machine weight: 400 kg
  
  

  ---

  
  
  
  
  
  UE-072921E-2 Brandt Optimat KDN 210 Edgebander
  
  
  
  
  
  

  
  
  ***Manufacturer detail & info from the web
  
  Equipped with:
  - gluing unit
  - end trimming unit
  - milling unit
  - scraping unit
  - milling unit
  
  Workpiece thickness 8 - 50 mm (Approximately 1/3" to 2")
  Edge thickness 0,4 - 3 mm (1/8")
  60 mm (2.3") min. panel width
  140 mm (5-1/2") min. panel length
  Feed speed 9 m/min.
  machine length approx. 3500 mm (about 138" / 11' 6" )
  suction sockets 3 x 60 mm diameter
  connected load 3,5 kW
  weight approx. 800 kg (about 1,763 lbs)
  
  

  ---

  
  
  

  
  
  
  
  UE-072921E-3 Grizzly Industrial Model G0447 37" Belt Sander
  
  
  
  
  
  

  From the seller " In good working condition. Our application has changed and no longer need"

  
  

  Type: Double Head Wide-Belt Sander
  Maximum Stock Width: 36 1/2"
  Maximum Stock Height: 6"
  Feed Rate: 14-60 FPM
  Drum Surface Speed: 3500F/2600R FPM
  Power: 20 HP / 3-Phase
  Weight: 2,709 lbs
  Machine Dimensions: 63 x 57 x 83"

  
  
  
  

  ---

  
  
  
  
  
  UE-072921E-4 SCM Model S520 20" Heavy Duty Planer
  
  
  
  
  From the seller "This used SCMI S 520 Planer In good working condition. Our application has changed and no longer need"
  
  
  
  
  
  

  
  
  *** Manufacturer detail & info from the web
  
  SCMI MODEL S520 HEAVY DUTY 20" PLANER
  
  9HP, 230 VOLT, 3-PHASE MACHINE
  
  SCMI "S520" Planer
  
  520 mm/20.5" working width
  
  250 mm/10" maximum height opening
  
  Motorized raise/lower of bed via four (4) screws
  
  Sectional infeed rollers and chip breaker
  
  Straight-knife cutterhead
  
  4,500 RPM cutterhead speed
  
  9 HP motor
  
  Variable feed speed
  
  

  ---

  
  
  

  
  

***Concerning "Used" Items: Although we strive for accuracy, some specifications are provided to us by the Seller. Cross-check with manufacturer for any difference between the machine being sold and what is stated in the manufacturer's information. Descriptions of condition of the equipment are not warranties. Descriptions are intended only as a courtesy and their accuracy is not guaranteed. Buyer inspection encouraged. There are no warranties or guarantees implied unless otherwise stated. All items are sold "As Is, Where Is, and With All Faults." No guarantee is made as to fitness for a particular purpose, implied or otherwise. Feel free to contact us if you have further questions before purchasing.