Equipment Lot: Santec 200 Ton 4 Hydraulic Press, Baileigh BP-3305CNC Press Brake, Baileigh BR-18E-24 Power Bead Roller, AireWorks FX-5-2000 Fabric Filter 5HP 2000 CFM Dust Collection Unit, Drytac DES-1 Edge Foiler

UE-012323C-1 Santec 200 Ton 4 Column Pillar Hydraulic Press

(SOLD)

***Manufacturer's Information:

Santec 4 Column Pillar Hydraulic Presses

4-nos Hard Chrome Pillars Type Presses are designed to provide maximum flexibility for different blanking, broaching and other applications. The change in the speed can be preset to take place at any point of the stroke with the help of limit switches / proximity switches / liner encoders / potentiometer. Maximum frame rigidity is achieved through computer aided frame design and finite element analysis. These presses can be custom designed to suit specific requirements of the customers.

- These 4-nos Hard Chrome Pillars Type Presses are precision designed to provide maximum flexibility for achieving different blanking, broaching and other applications
- Change in speeds can be preset for taking place at any point of stroke with help of limit switches/proximity switches/liner encoders/potentiometer
- Maximum frame rigidity achieved through computer aided frames as well as finite element analysis
- Presses custom designed to suit specific requirements of customers

UE-012323C-2 Baileigh BP-3305CNC Press Brake

(SOLD)

Wire: 220V / 3PH / 60 HZ

***Manufacturer's Information:

- BP-3305CNC delivers 33 tons of pressure across its 63" table.
- Runs on 220-volt 3-phase power.
- Easy-to-use programmable 2-axis Estun E21 controller is integrated right from the factory.
- Internal memory can hold 40 programs, each with its own unique number for easy identification.
- Controller will keep a piece count for large production runs.
- Made with NOK, Siemens, and Omron components.
- Foot pedal lets you control all bending functions, whether on full auto or jog mode.
- Fully welded steel plate frame minimizes deflection and maintains rigidity.
- Gooseneck punch and a 4 sided multi-V bottom die come standard.
- Integrated safety light curtains help prevent accidents.

Specifications:

- Item Number: BP-3305CNC
- Table Size: 63" x 7"
- Programming: 40 Programs/ 25 Steps per Program
- Back Gauge Length: 21.5"
- Return Speed: 3.3" / sec.
- Pressure: 33 Tons
- Included Tooling: 78° Gooseneck & Multi-Vee Die (5/16", .39", .47", 5/8", .94", 1-1/4", 2")
- Throat Depth: 8"
- Stroke Distance: 3.15"
- Approach Speed: 3.5" / sec
- Back Gauge Motor: 1/2 hp
- Bending Speed: .394" / sec.
- Main Motor: 7.5 hp
- Distance Between Housings: 51.25"
- Distance From Table To Ram: 13.325"
- Power: 220V / 3-phase
- Shipping Weight: 5050lbs
- Shipping Dimensions (Inches): 91x56x87

UE-012323C-3 Baileigh BR-18E-24 Power Bead Roller

(SOLD)

Includes: BR18E-Hemming Roll1, Roll 2, Roll 3

***Manufacturer's Information:

1000923, BAILEIGH BR-18E-24, 110V, 24IN, 16-GA POWER BEAD ROLLER
Built with foot pedal controls, this 16 gauge electric bead roller leaves your hands free to work the material. The industrial-grade motor, gearbox, and plate steel frame on the BR-18E-24 ensure accuracy.

Features:

- 16 gauge mild steel and 14 gauge aluminum capacity.
- 24" throat depth is perfect for 4' x 8' sheets of sheet metal, but the design still makes it simple for you to create intricate patterns.
- Runs on 110-volt single-phase power, so you can plug it in almost anywhere.
- Intuitive variable-speed foot pedal design: press harder to roll faster. Apply less force for slower, more careful forming.
- Up to 30 rpm feed rate, which amounts to 280" per minute.
- Rolls can run forward or in reverse. Just flip the switch to change direction.
- Adjustable top roll lets you set your desired forming depth.
- Depth stop within the throat helps you make straight, repeatable beads.
- We offer tooling to fit most applications.
- 3/4" shaft diameter is compatible with most commercial roll sets.
- Robust steel floor stand includes a rack for roll sets.
- All moving parts turn on long-lasting bronze bushings with grease fittings for convenient maintenance.
- Fully welded plate steel frame keeps the bead roller rigid, so it makes quality profiles over many years of use.

Specifications:

- Item Number: BR-18E-24
- Motor Hp: 1/8 hp
- Max. Thickness (Mild Steel): 16 gauge
- Roll Holder Included
- Throat Depth: 24"
- Stand Included
- Adjustable Depth Stop Included
- Power: 110V
- Shipping Weight: 200lbs
- Shipping Dimensions (Inches): 50" x 23" x 23"

UE-012323C-4 AireWorks FX-5-2000 Dust Collector

(SOLD)

***Manufacturer's Information:

Our new FX Series dust collectors are expandable in design. A typical machine consists of a fan or blower(s) and a filter bag/discharge point plenum. The size of the discharge plenum is determined by a given design volume of airflow and the waste volumetric requirements of the application. The leg assemblies can be bolted onto the unit, either on the end, or at the mid span of the dust collector.

These component parts can be assembled at the factory or can be assembled by the client.

To reduce shipping costs, the system can be stacked on a single, smaller skid as opposed to shipping a 14-foot long machine.

Future system expansion is accomplished by simply adding an additional blower and filters to the system. In today's work cell manufacturing environment, this design can conserve energy by allowing a shop owner to run only a portion of the dust extraction as opposed to a large 50+ Horsepower system to service only a fraction of the shop's overall requirement.

In addition, the factory and regional master distributors stocking the standard components will be able to drastically reduce lead-time for a custom dust collector. The design promotes customized machinery from off-the-shelf components.

- 1 Discharge Point FX Series
- FX-5-2000
- 5 HP TEFC Motor
- 11 Cu. Ft. Collection Capacity
- 2000 CFM / 6.37 IWG
- (4) 12" Diameter x 8'-0" Filter Bags
- 100.5 Sq Ft. Cloth
- 19.9:1 Air-to-cloth ratio
- 11" Inlet Diameter

UE-012323C-5 AireWorks FX-5-2000 Dust Collector

(SOLD)

***Manufacturer's Information:

Our new FX Series dust collectors are expandable in design. A typical machine consists of a fan or blower(s) and a filter bag/discharge point plenum. The size of the discharge plenum is determined by a given design volume of airflow and the waste volumetric requirements of the application. The leg assemblies can be bolted onto the unit, either on the end, or at the mid span of the dust collector.

These component parts can be assembled at the factory or can be assembled by the client.

To reduce shipping costs, the system can be stacked on a single, smaller skid as opposed to shipping a 14-foot long machine.

Future system expansion is accomplished by simply adding an additional blower and filters to the system. In today's work cell manufacturing environment, this design can conserve energy by allowing a shop owner to run only a portion of the dust extraction as opposed to a large 50+ Horsepower system to service only a fraction of the shop's overall requirement.

In addition, the factory and regional master distributors stocking the standard components will be able to drastically reduce lead-time for a custom dust collector. The design promotes customized machinery from off-the-shelf components.

- 1 Discharge Point FX Series
- FX-5-2000
- 5 HP TEFC Motor
- 11 Cu. Ft. Collection Capacity
- 2000 CFM / 6.37 IWG
- (4) 12" Diameter x 8'-0" Filter Bags
- 100.5 Sq Ft. Cloth
- 19.9:1 Air-to-cloth ratio
- 11" Inlet Diameter

UE-012323C-6 Drytac DES-1 Edge Foiler

From the Seller: "The unit was bought new – it was used for approximately 50 hours."

***Manufacturer's Information:

Plaque Finishing and Block Mounting Made Easy.

For a competitive edge in specialty plaque manufacturing, the DES-1 automated edge finishing system is the professional choice for mid-to-high-volume operations. the continuous feed unit is easy to set up and operate, performing both shaping and foil application steps in a single pass. The DES-1 first trims and bevels the mounted substrate, then automatically applies the thermal-set decorative edge foil border.

Used by plaque and block mounters worldwide, this high-quality edge finishing machine is designed to finish the edges of medium density fiber board (MDF) or tempered Masonite (hardboard) after the images have been mounted and laminated onto the board. The edger features several stations on a conveyor that bevel (45-degree bevel), sand and apply an edge foil all in one single pass.

DES-1 Specifications
- Max Cut Thickness: 1.19" (32mm)
- Weight (Un-crated): 950 lbs. (430 Kg)
- Weight (Crated): 1050 lbs. (477 Kg)
- Width: 30" (762mm)
- Length: 90" (2286mm)
- Height: 48" (1219mm)
- Electrical Requirements: (U.S. and Canada) 220 Volts/30amp/Single phase/60Hz
- Electrical Requirements: (Europe) 220 Volts/30 Amp/Single phase/50Hz
- Other Requirements: Dust collection system
- Machine Speed: 18 feet (5.5m) per minute
- Foil colors: Black, white, silver, gold
- Foil widths: 3/4", 1 1/2", 1 1/4" (19mm, 38mm, 31.75mm)