Equipment Lot: Scott 5000 Tab Machine, Duplo 200 UV Coater, Duplo Lifter and Stacker, Rhin-O-Roll Coiler, Scott Loose Leaf Sheet Reinforcing Machine, Fiery Server, Scott 1800 Mylar Index Tab Machine, Scott Index Tab Cutting Machine, Supplies Used with Scott Machines, DUPLO SF-200 20" AIR SUCTION AUTO FEEDER

UE-011821B-1  Scott 5000 Tab Machine (Sold)

Manufactured: 08/02

***From the Manufacturer:

The Scotty 5000 has taken the best features of the Scott Ten Thousand Automatic Plastic Index Tabbing Machine (aka Scott 10000 Automatic Plastic Index Tabber) and incorporated them into a compact unit. The Scotty 5000 uses a platen plastic sealing system that heats only the tab extension and an adjustable dwell function allows you to hold the sheet for a pre-determined time. Therefore, some difficult stocks that require special handling are easier to run. Unlike many pieces of automated equipment that require large runs because of make ready time, the Scotty 5000 is actually much faster to configure and get moving with jobs. The fast dial counter allows quick changeover of plastic length, tab cut width, as well as the position of the plastic on the paper. It is an excellent machine for long or short runs. Adjustments for film lengths, tab size and position is precisely measured to .01 and is easily repeatable.

This unit will laminate and tab cut up to 4,200 laminated index tabs per hour. Plain tabs will run at over 5,500 per hour. The Scotty 5000 is built in the Scott-Precision tradition. There is also an option available for the Scotty that allows you to run an 18 1/2-inch long sheet.

The Scotty 5000 Tabber automatically feeds, laminates and tab cuts products with the touch of a button. Turn around time is reduced while control of your job is maintained. It's the machine of choice for trade binderies or any application where control of the materials provided for finishing are going to vary and is excellent for long or short runs. Adjustments for film lengths, tab size and position are precisely measured to .01 inches and are easily repeatable.

Manufacturer: Scott Precision
Type: Plastic Tab Machine
________________________________________________________________________________________
UE-011821B-2  Duplo Ultra 200A UV Coater  

***From the Manufacturer:

Offline UV coating system for short- to mid-volume runs
Simple to use and compact in size, the Ultra 200A applies a high quality gloss, matte, or satin finish to a wide range of offset and digitally-printed applications, enhancing the richness of its colors while protecting them from scratches and scuffs. The Ultra 200A UV coating machine offers unique capabilities for coating both sides of the sheet with no additional adjustments required. Print providers can offer double the value by coating both sides of direct mailers, brochures, business cards, book covers, and more!

Key Features

- Adds a high quality gloss, matte, or satin finish
- Handles both offset and digital print applications
- Coats both sides of the sheet with a smear-free finish
- Accommodates 20" x 28" sheet sizes
- Standard SF-200 Suction Feeder handles high volume jobs
- IR heater and automatic cleaning system

Coating Speed: 36 – 66 feet per minute
Selectable Speeds: 36/46/56/66 feet per minute
Paper Thickness: 120 – 350 gsm
Sheet Size: Max 20" x 28" Min 8.5" x 11"
3 Coating Rollers: Metering, Application, Pressure
Detection Functions: Paper jam, lamp life indicator, paper stack full, low coating, coating empty, open safety cover, over heating
Warm Up Time: UV lamp 90 seconds
UV Lamp Power: 150W per square inch
Auto Cleaning: Yes
Conveyor Length: 56.70"
Roller Gap Setting by 0.1 mm gaps: Simple manual adjustment for application and pressure rollers
Control Panel: Simple keypad, programming and adjustments done through Intelligent Control System
Standard Functions: UV oil purging, priming, self-diagnostic tool, power save
Standard Features: SF-200 Suction Feeder, IR heater, Hand feed tray
Power Supply: Single phase, 208 – 240V 60Hz 29A
Power Consumption (including IR) 4.6 KW
Noise Emission: 69.6 dB(A)
Dimensions: 70" L x 42" D x 49" H weight: 1,067 Lbs.
SF-200 Suction Feeder:
Speed Up to 66 feet per minute
Stacker Capacity: 7.5" or 70.5 lbs.
Feed Process: Top feeding air suction belt
Counters: Total, batch
Paper Sizes:
- Max 20" x 20" (Max. paper length of 28" with optional extended tray- feeder capacity will be limited to 3")
- Min 8.5" x 11"
Detection Functions: Double sheet detector
Power: 115/230V 50/60Hz 1.9A
Dimensions: 21" x 31" x 46" Weight: 225 Lbs.___
________________________________________________________________________________________
UE-011821B-3 Duplo System 5000 Lifter and Stacker

________________________________________________________________________________________
UE-011821B-4 Rhin-O-Roll Coiler 

Model HD-4170

There are two of these available.

________________________________________________________________________________________
UE-011821B-5 Scott Loose Leaf Sheet Reinforcing Machine 

There are two machines available.

***From the Manufacturer:

Specifications
- Speed: 5,000 reinforced sheets per hour
- Length: 8" Minimum
- Width: 17" max 3-1/2" min
- Paper Weight: 6-point to 17-point paper
- Plastic Size Width: 9/16 inches to 3/4 inches (14.3 to 19.1mm)
- Electrical Requirement: 18 amp, 120 VAC, 60hz

________________________________________________________________________________________
UE-011821B-6 Fiery Server 

From the Seller: "Was the computer server used for some of the different equipment"

________________________________________________________________________________________
UE-011821B-7 Scott 1800 Mylar Index Tab Machine 

***From the Manufacturer:

Manufacturer: Scott
Model: 1800 – Plastic Index Tab Machine
Speed: 2,200 laminated sheets per hour
Sheet Size Maximum: 18 inches (457.2mm) Minimum: 5-1/2 inches (139.7mm)
Paper Weight: 6-point to 25-point paper
Plastic Size: 1 inch to 5-1/2 inches (25.4mm to 139.7 mm)
Air Requirements: 4 cubic ft. per minute (1888 cubic cm per second) at 80 psi
Table Top: 48 inches x 30 inches (1219mm x 762mm)

ELECTRICAL:
- 120 V
- 50/60 Hz
Dimensions:
- Width: 48"
- Depth: 30"
- Height: 36"
- Weight: 330

________________________________________________________________________________________
UE-011821B-8 Scott Heavy Duty Index Tab Cutting Machine 

***From the Manufacturer:

Index Tabcutting Machine

Fast and Easy Setups
It takes just seconds to change tab positions. Changing tab sizes takes only two minutes.
Handles Many Size Sheets
The extra long steel knives quickly and easily cut a 1 inch (25.4mm) tab in the first position on a 15 inch long sheet.
Precision Cut a Variety of Tab and Step Cuts.
Adjust tabs to any width from 1/2 inch to 6 inches (12.7mm to 152.4mm) by simply moving knives closer or father apart.
Safe and Easy Operation
The full length safety bar protects the operator's fingers from knives while rapidly inserting sheet after sheet.
Proven Durability
Knives are made from tool steel, hardened and precision ground. They are mounted on 2 inch diameter steel arbor supported by ball bearings. Accurate cutting is further ensured by the solid cast-iron machine body.

- Speed: Up to 5,000 tabs per hour
- Sheet Size: Maximum:15 inches with a half inch inset on a 1 inch tab (381mm with a 12.7mm inset cut on a 25.4mm tab)
- Minimum: any width x 5-1/2 inches (139.7mm minimum depth)
- Paper Weight: 6-point to 25-point paper 6 inches (152.4mm) maximum 1/2 inch (12.7mm) minimum
- Tab Cut Size: Stepcut: 13-1/2 inches (342.9mm) maximum 1/4", 3/8", 1/2", 5/8", 3/4"
- Stock Tab Extensions: (6.3mm, 9.5mm, 12.7mm, 15.9mm, 19.1mm)
- Knives: Hardened, precision ground steel
- Electrical Requirement: 0.5 amp, 120 VAC, 50-60 Hz
- Air Requirements: 2 cubic ft. per minute (944 cubic cm per second) at 80 lbs. pressure. Built in pressure regulator and filter allow use of shop air or separate compressor. permits variations in cutting power.
- Ball Bearings of Bushings: All Moving Parts
- Lubrication: Fully Automated
- Table Top: 48 inches x 15-3/4 inches x 3/8 inches (1219 mm x 400 mm x 9.5 mm)
- Table Height: (Adjustable) 39-1/2 inches (1003.3 mm0 maximum 32-1/2 inches (825.5 mm) minimum
- Floor Space Required: 58 inches x 26 inches (1473.2 mm x 660.4 mm)
- Shipping Weight: 335 lbs. (152 kg)

________________________________________________________________________________________
UE-011821B-9 Supplies Used with Scott Machines

Mylar Film used with Scott Tab Machine.

For use in creating tabs

***From the Manufacturer:

Our high performance adhesive formulation boosts your productivity excels in sealing quality and high speed operation at far lower operating temperatures than conventional tabbing films. We engineered this adhesive to liquefy and permeate paper fibers almost instantly as low as 180°F, making it perfect for use on both digital and offset printing. Besides allowing consistent and high quality adhesion to heat sensitive printing, the lower operating temperatures are safer for your personnel and will also save a great deal of money by substantially reducing wear and tear on.

All colors and clear are manufactured in:
- Low Temperature
- Recommended sealing temperatures 180° - 250°· F
- Reduces ink pick-off on printed body jobs
- Reduces paper curl
- Seals to a variety of paper stocks including gloss paper
- Color consistency (no blotches)

Manufacturing capabilities:
- Variety of colors
- Available in 2000' or 4000' rolls
- Variety of slit widths
- Low minimum order quantity on standard stock items (1-5/8" x 2000')

________________________________________________________________________________________
UE-011821B-10 DUPLO SF-200 20" AIR SUCTION AUTO FEEDER

***From the Manufacturer:

Provides minimal reloading and increased productivity.
The 7.5" stack capacity utilizes an air suction feeding system that feeds from the top of the stack to reduce marking on the sheets.
The feeder automatically sets the gap between each sheet to ensure no sheets overlap while the double feed detection ensures the coating process stops when two or more sheets have been fed.
Speed is Up to 66 feet per minute

The Duplo SF-200 20" Air Suction Auto Feeder provides minimal reloading and increased productivity. With a 7.5" stack capacity, the SF-200 utilizes an air suction feeding system that feeds from the top of the stack to reduce marking on the sheets. The feeder automatically sets the gap between each sheet to ensure no sheets overlap while the double feed detection ensures the coating process stops when two or more sheets have been fed.

Product Details

- Speed: Up to 66 feet per minute
- Stacker Capacity: 7.5" or 70.5 lbs.
- Feed Process: Top feed air suction belt
- Counters: Total, batch
- Paper Sizes: 8.5" x 11" to 20" x 20" (max paper length of 28" with optional extended tray-feeder capacity will be limited to 3")
- Detection Functions: Double sheet detector
- Weight: 225 lbs.
- Power: 115/230V 50/60Hz 1.9A
- Options: Extended feed tray
- Part Number: SF-200