Equipment Lot: Wizard 8000 CMC Computerized Mat Cutter, Pistorius EMN-14 14" Double Miter Saw, Morso Chopper, Pistorius VNB Pneumatic Frame Joiner, CTD D45 Double Miter Saw, & Seal Masterpiece 500T-X Mechanical Heat Press

UE-033123B-1 Wizard 8000 CMC Computerized Mat Cutter

(SOLD)

Includes: stand, manual, computer, monitor, keyboard, and mouse

***Manufacturer's Information:

An economical and efficient mat cutting solution that allows custom framing businesses to cut more and cut faster.

Some of the features our CMC Model 8000 offers:
- Cut speed of 7.5 inches per second
- 45 degree standard bevel cartridge
- Optional debossing package with three cartridge options for pressing subtle designs into mats: thin, medium and wide
- MatDesigner software

UE-033123B-2 Pistorius EMN-14 14" Double Miter Saw

(SOLD)

Includes: Measuring Table & Stop. Also includes Powermatic Dust Collector.

UE-033123B-3 Morso Chopper

(SOLD)

Includes: measuring table and stop. This is a newer generation chopper with deluxe scale, and safety shield.

***Manufacturer's Information:

Morso Model F Mitering Machine

Morso Model F mitring machine cuts double mitre at 45° and single mitre up to 90°. Tenon, mortise joints, and a wide variety of angled cuts can also be made.

When using the Morso F, you will have no dust compared to a saw. Also, the waste of your moulding will be minimized as Morso F cuts double mitres very close, (less than one mm waste of moulding.)

The mitre saw cannot do the mitres as close, and therefore the waste by using a saw, will always be minimum one centimetre.

One centimetre of waste does not sound of much, but if a calculation is done of 100 cuts a day, it actually turns out that the waste over a year is 260 meters waste of moulding! That is only with 100 cuts a day!

Morso F leaves the cut surface of the wood perfectly smooth and accurate, requiring no further preparation before joining. The horizontal movement of the knife block is stepwise adjustable. The sliding longitudinal stop and measuring scale ensure accurate repeat work.

The special lever system of the machine ensures a very easy operation. Twin return springs automatically bring the knives back to starting position.

Morso F is delivered with safety guard, waste chute, sliding longitudinal stop, measuring scale, adjustable fences (45° x 90°), and adjustable rebate supports.

Morso F is manually operated with a foot pedal, needs no compressor or electricity and can therefore be operated anywhere.

Technical data for Morso Model F Mitring Machine
- Double mitre: 45°
- Single mitre: up to 90°
- Cutting width, max.:100 mm
- Cutting height, max.: 160 mm
- Square cutting: 65/65 mm
- Measuring scale up to: 1,500 mm
- Net weight: 90 kg

UE-033123B-4 Pistorius VNB Pneumatic Frame Joiner

(SOLD)

*We are currently waiting for pictures of this machine*

UE-033123B-5 CTD D45 Double Miter Saw

(SOLD)

Includes: mister / misting system. This set up for cutting metal. Also includes measuring table.

***Manufacturer's Information:

CTD D45 Double Miter Saw Manual

The D45 is popular world wide because of its unique features, low cost and precision. Engineered for higher production, this double mitre saw makes two 45 degrees mitres at one time, saving time and materials. D45's are used by thousands in the decorative arts trade throughout world.

Designed to cut Aluminum, Wood, plastics, composites, aluminum extrusions, plastic extrusions, non-ferrous metals.

Blade Capacity: 12" OD

Spindle & Pivot: Both mounted on pre-loaded and sealed ball bearings.

Arbor: 5/8 (16mm) with 2-1/4 (57mm) saw collars.

Iron Castings: Saw arm, pivot brackets and table are precision machined and ground with milled slots in table to guide pivot brackets and fences.

Motors & Voltages: 1-1/2 H.P., 3450 RPM with Dual Magnetic Starter.

Table Height: 34-1/2 (88cm) from floor.

Floor Stand: Close coupled heavy gage steel stand completely enclosed with 6 dust outlet. 1200 CFM required.

Length of stroke adjustment: The D45AX is unique in that the stroke of the machine and the position of the blade above the work can be adjusted to use only the stroke needed to cut a particular moulding or extrusion. Saw heads reverse immediately, on release of the foot valve, thereby saving wasted time and motion.

Production Rate: The D45AX is capable of cycling at one second intervals. However, actual production rates vary with the type and width of material to be cut.

Size: Standard machine, without tables or gages; weight 550 lbs. 46" wide x 22" front to back x 51-1/2" high.

Actuation: Pneumatic foot valve with cover

Air Pressure: 75 PSI with Air Filter/Regulator/Lubricator; includes Auto Drain.

Air Consumption: 1.0 CF per 10 strokes at 75 PSI.

UE-033123B-6 Seal Masterpiece 500T-X Mechanical Heat Press

(SOLD)

***Manufacturer's Information:

Seal Masterpiece 500T-X. It is Seal's largest format mechanical press and used by framing professionals. Applications for this press include mounting, laminating and applying texture to large photos, artwork and posters.

Specifications

- 26" x 34" Platen Size
- Solid State Thermostat for Accuracy and Electrical Economy.
- Easy Reading Thermostat
- Mount up to 52" x Infinity
- Shipping Weight - 275 lbs.
- Power Requirements - 120 Vac 12 Amps