Hoffmann PP2-HF Dovetail Routers
Date listed: May 22, 2020
Overview:Both standard brush-style router motors have been replaced with production-duty High-Frequency Router Motors for extended service life, reduced maintenance and higher production levels.
Production-duty, freestanding two-head dovetail routing machine with solid cast aluminum table and heavy steel frame. Machine is designed to rout a single dovetail keyway into two work-pieces with each machining cycle. For Dovetail Keys sizes W-0,W-1, W-2, W-3, and W-4.
Highlights:Large work surface is designed to be at a comfortable working height, the router motors are controlled by a contactor and a 4" dust collection port is located at the back for connection to a central dust collection system.
Operation:The keyway locations are adjusted by positioning the guided center fence plate on the machine table; the keyway lengths (routing heights) are adjusted by setting a height-stop rod to the desired setting.
Routing height adjustment road with scale
Pressing the pneumatic foot pedal starts the machining cycle:
- Pneumatic clamps secure both work-pieces and motors are switched on
- Router heads advance until pre-set height is reached
- Router heads return to home position and motors are switched off
- Pneumatic clamps release work-pieces
Output is approx. 16 routing strokes per minute, which translates into 4 completely processed rectangular frames. These numbers include material handling, but obviously depend on routing depth, feed speed, material flow and operator performance as well. Flow control valves on the main pneumatic cylinder allow the operator to adjust the upward and downward feed rate independently, depending on the material being processed. A 4" diameter dust collection port in the back is used to connect a central dust collection system.
The supplied router bits are solid tungsten carbide, made to exacting specifications. Depending on the routing depth and the material to be routed, the useable cutter life is approx. 10,000 strokes, often times even more. Every machine is shipped with a tool kit and set-up jig, which allows a router bit change in only minutes.
About this Item
Features & Specifications
From the manufacturer:
W9301200 Dovetail Keys, size W3 - 1/2" (12.7mm) for 9/16" and thicker stock
Width: 6.75 (in) Height: 4.25 (in) Depth :5.00 (in) Minimum Purchase: 1 unit
Packaging:Price is per carton of 1,000 Keys
*** It is the buyer's responsibility to check with manufacturer for any difference between the machine being sold and what is stated in the manufacturer's website. Although we strive for accurate information, all equipment is sold "As Is".
- Hoffmann Dovetail Routing Machine PP2-HF, freestanding floor model
- Two High-Frequency Router Motors and matching inverter installed
- Ready for operation
- Lockable Emergency-Stop
- Air regulator-lubricator assembly
- Two W-2 solid carbide router bits installed
- Standard 45 degree center fence plate and square stop
- Toolkit and manual
- Power Supply 230 volts - 3 phase
- Air Supply 90 psi - approx. 0.1 cubic foot/cycle
- Motors 2 x 750 Watt HF motor with double front bearing
- Motor speed 18,000 rpm at idle
- Collet size 1/4”
- Motor carriage guides 16mm diameter guide rods, precision ground
- Operation pneumatic – dual cylinder design
- Max. routing height 4” – 101mm
- Max. material height 5 3/4” – 146mm
- Installed router bit W-2, solid carbide
- Available router bits W-0, W-1, W-2, W-3 and W-4
- Dimensions W/D/H 39 3/8” x 29 1/2” x 59”
- Weight 348lbs.
***Concerning "Used" Items: Although we strive for accuracy, some specifications are provided to us by the Seller. Cross-check with manufacturer for any difference between the machine being sold and what is stated in the manufacturer's information. Descriptions of condition of the equipment are not warranties. Descriptions are intended only as a courtesy and their accuracy is not guaranteed. Buyer inspection encouraged. There are no warranties or guarantees implied unless otherwise stated. All items are sold "As Is, Where Is, and With All Faults." No guarantee is made as to fitness for a particular purpose, implied or otherwise. Feel free to contact us if you have further questions before purchasing.
The Hoffmann Dovetail Joining System is used in woodworking, furniture manufacturing, window and door production, architectural millwork designs, store fixtures, custom and production picture framing shops, pre-fab housing and much more, in shops and plants around the globe.
To best suit an ever expanding range of joining application, a total of five different Hoffmann Dovetail Keys and corresponding Dovetail Router Bit sizes are offered, designated as W-0, W-1, W-2, W-3 and W-4.
The "W" designations refer to the cross-sections of the Keys (the size of the "bowtie"), and Keys in each size are available in a variety of different lengths.
The cross-section dimensions of W-3 Hoffmann Dovetail Keys are approx. 1/2" wide and 3/8" tall (13mm by 9.5mm).
Pricing & Shipping
Interested in the product? Fill out the form or call us at 330-405-9421 for pricing and other information.
Product is located in California. Customers can pick the machine up or have it shipped for an additional fee.
Can't Find the Equipment You Need?
We're constantly getting new listings. Let us know what you're looking for and we'll notify you when the equipment is available.
Turn Your Old Equipment Into Cash
No longer need your equipment? We can help.