Equipment Lot: Morso Chopper with Deluxe Measuring Scale & Stop & Cassese CS89 Pneumatic Frame Joiner

UE-090723B-1 Morso Chopper with Deluxe Measuring Scale & Stop

(SOLD)

Includes: Deluxe Measuring Scale & Stop

***Manufacturer's Information:

Morso Model F Mitering Machine

Morso Model F mitring machine cuts double mitre at 45 degrees and single mitre up to 90 degrees. Tenon, mortise joints, and a wide variety of angled cuts can also be made. When using the Morso F, you will have no dust compared to a saw. Also, the waste of your moulding will be minimized as Morso F cuts double mitres very close, ( less than one mm waste of moulding ). The mitre saw cannot do the mitres as close, and therefore the waste by using a saw, will always be minimum one centimetre. One centimetre of waste does not sound of much, but if a calculation is done of 100 cuts a day, it actually turns out that the waste over a year is 260 meters waste of moulding. ( That is only with 100 cuts a day) Morso F leaves the cut surface of the wood perfectly smooth and accurate, requiring no further preparation before joining. The horizontal movement of the knife block is stepwise adjustable. The sliding longitudinal stop and measuring scale ensure accurate repeat work. The special lever system of the machine ensure a very easy operation. Twin return springs automatically bring the knives back to starting position. Morso F is delivered with safety guard, waste chute, sliding longitudinal stop, measuring scale, adjustable fences ( 45 degrees & 90 degrees), and adjustable rebate supports. Morso F is manually operated with a foot pedal - needs no compressor or electricity and can therefore be operated anywhere.

Technical data for Morso Model F Mitring Machine:

- Double mitre: 45 degrees
- Single mitre: up to 90 degrees
- Cutting width: max. 100 mm
- Cutting height: max. 160 mm
- Square cutting: 65/65 mm
- Measuring scale: up to 1,500 mm
- Net weight: 90 kg

UE-090723B-2 Cassese CS89 Pneumatic Frame Joiner

(SOLD)

From the Seller: "Barely used and in great condition."

***Manufacturer's Information:

The CS88 & CS89 have been the most popular models in the world for over 15 years, and thus their reputation and reliability are proved. Although manufactured to the highest standards, the prices of the CS88 & CS89 remain very competitive.

Features of the CS88 & CS89:

• Cassese wedges cartridge system
  • Easy change of wedge size with no need to adjust or change any part on the machine. All Cassese underpinners are able to use the full range of Cassese cartridge wedges in 7 different sizes, available in both softwood and hardwood.
• Adjustable joining angle
  • It is possible to adjust the joining angle of the fences to correct the gap if the cutting angle is not perfectly at 45 degrees.
• Patented self-adjusting fences
  • Are adaptable to the shape of any moulding profile, to prevent gaps in the top or bottom of the join.
• Horizontal rebate clamp
  • Secures the moulding pieces together to ensure perfect alignment of the mitres while joining.
• Quick-Change top clamp
  • To adjust between softwood and hardwood and different mouldings' shapes.
• 2 positioning stops
  • (front and back) allow wedges to be stacked up, even in hardwood.
• Unique triangular design table
  • Makes it easy to adapt to the corner of a workbench, which assists in supporting the frame while joining.
• CS 88 Foot operated
  • Mobile foot pedal.
  • The pedal position can be easily changed between the back or the front of the machine, and can also be set up for either left or right foot operation.
  • Unique pulley and cable drive system.
  • Multiplies the force applied on the foot pedal more than 3 times, thus making it easy for the operator to drive wedges into the hardest timbers.
• CS 89 Air operated
  • Pneumatic double-stage pedal.
  • Permits the operator to clamp the mouldings and visually check the join before inserting the wedge.
  • No pressure adjustment required.
  • When changing between softwood and hardwood.

Specifications:

• Mouldings
  • Width 5mm-95mm
  • Height 7mm-85mm
• Smallest internal frame size 70mm x 70mm
• Dimensions
  • Length 450mm
  • Width 600mm
  • Height 1090mm
• Weight 25 Kg 31 kg
• Air supply nil 6 bars using
• 3 litres / cycle