Picture Framing Equipment Lot: Alfamacchine / ITW AMP 200T Double Miter Saw w/ Dust Collector, Miter Mite VN42 Underpinner, Fletcher Wall Cutter, Fletcher Mat Cutter, C&H 48" Mat Cutters (2 Available), & JDS Dust Collector

UE-032122C-1 Alfamacchine / ITW AMP 200T Double Miter Saw w/ Dust Collector

***Manufacturer's Information:

The T200M was designed with the Custom Framer in mind. It can cut the widest moulding in the industry (up to 7 1/2") and is priced economically as our entry level machine. The saw is equipped with two measuring stops that are adjusted based on the length of the cut desired, as well as pneumatic horizontal clamps that hold the moulding in place. To make a cut, the operator uses the hand grips to manually pull the blades horizontally (one at a time) across the moulding to create the mitres. This may be our entry level double mitre saw, but one look at this machine and you will agree, the T200M incorporates the highest level of quality and safety to ensure trouble free performance for years to come!

CUTTING CAPABILITY

- Moulding Width: Up to 7 1/2"
- Moulding Height: Up to 3 1/2"
- Outfeed Table: 52" with Measurement Gauges and Stops (standard)
- Cuts per Hour: 400 (Approximately)

SAW SIZE

- Width: 117"
- Length: 31"
- Height: 48"
- Cut Table Height: 36"
- Weight: 794 pounds

POWER REQUIREMENTS

- 3 Phase 230 Volt Electrical
- 100 psi (controls pneumatic clamps)
- Chip Collection System
- Efficient Dust Collection
- Numerous Safety Features with Blades Enclosed During Operation
- Cuts Wood, Plastic, MDF/HDF

UE-032122C-2 Miter Mite VN42 Vnailer / Joiner / Underpinner

(SOLD)

***Manufacturer's Information:

The Mitre-Mite VN 42 has been designed for ease of operation and is particularly well suited for assembling larger frames. This machine comes with a height adjustable base and has a convenient tilt / roll feature which allows for easy movement around the shop. it can be operated from the front or back and has a dual stage foot pedal which allows the framer to see if the corner is properly aligned before nailing. After the framer sets the stops, the hand lever is then used to position the nail head for driving or stacking V-Nails any where along the frame joint.

MACHINE SIZE:

- Width: 14"
- Length: 19"
- Height: 33 to 43"
- Weight: 150 lbs
- Power Source: Pneumatic

FRAMING CAPABILITY:

- Frame Width 3/8" to 6 1/2"
- Frame Height 1/4" to 4 1/2"

NAIL SIZES:

- 3 mm
- 5 mm
- 7 mm
- 10 mm
- 12 mm
- 15 mm

UE-032122C-3 JDS Dust Collector

Model: 14050
Year: 2007

***Manufacturer's Information:

The JDS 3HP Dust Force is the perfect dust collector for shops that require powerful performance as well as versatility. This portable collector can easily be rolled to a convenient location or it is powerful enough to remain stationary as a central collection system. Two collection bags will reduce the downtime associated with the disposal of collected dust and debris, and two 1 micron bags assure that only clean air will be returning into the shop. A unique air flow adjustment knob will assure that both collector bags will receive equal amounts of collected dust. The TEFC 3HP motor blower provides a maximum 2500 CFM with a max static pressure of 14.5 inches. The dust collector has an 8 inch inlet which is ideal for central system ductwork or an adapter that has three 4 inch openings for direct to the source collection hoses.

UE-032122C-4 Fletcher - Terry 3000 Multi Material Cutter

Size: 60"
Manufactured 05 / 01

***Manufacturer's Information:

The Fletcher 3000 features a 3-position cutting turret containing a glass scoring wheel, scoring tip for scoring acrylic materials and a cutting blade for picture frame matboard and foam board materials up to 1/4" (6mm). A ramping feature allows the lifting of scoring wheel on top edge of glass resulting in a cleaner edge break when scoring glass. Handles material sheets up to 60" high (1.52m). Mounts on wall or freestanding installation. Available in 48" (1219mm) or 60" (1524mm) vertical cutting capacity.

Substrate Cutting Capabilities:

- Glass: Up to 1/4" (6 mm)
- Mirror: Up to 1/4" (6 mm)
- Acrylic: Up to 1/4" (6 mm)
- Matboard: 4, 8, 12 ply
- Foamboard: Up to 1/4" (6 mm)

Technical Specifications:

- Vertical Cutting Capacity: 48"
- Cutting Head: Rides on high tensile strength steel, hard chrome plated and polished, resulting in smoother gliding action for consistent cutting head performance and longevity.
- Vertical Bars: Rails do not bend or flex during the cutting process for straight, accurate cutting over the entire substrate height.
- Material Clamping System: Patented lever-type clamping system that secures in place substrate heights up to 48" to prevent buckling and shifting of material during the cutting process.

UE-032122C-5 Fletcher - Terry 2100 Mat Cutter

Size: 48"
Manufactured 03 / 01

***Manufacturer's Information:

Professional level mat or mount board cutter for creating bevels and producing V-Grooves as decorative features and finishes in matboard up to 4-ply. Features a dual cutting feature for matboard specialty cutting or a 90 degree cutting feature for sizing matboard or cutting of foamboard up to 1/2" (13mm). Available machine sizes, 48" (1.2m) or 60" (1.5m).

Besides being used at many global custom frame shops, the 2200 is a great investment and business expansion tool for sign companies, photo studios, boutique shops, quick printers, and arts & crafts shops.

Our Fletcher 2200 mat cutter provides specialty cutting for creating bevels and producing v-grooves in mat board used for picture framing and art / graphics retail matting.

Available in 48"or 60" cutting capacity.

Performance Features:

- Manual mat cutting for sizing cuts, cutting bevels and producing v-grooves.
- Cuts 4-ply mat board.
- Straight line cutting of foam board up to 1/2" (13 mm).
- Maximum material cutting thickness: 1/2" (13mm), 90 degrees cut only.
- Available machine sizes: 48" (1.2m) and 60" (1.5m).

UE-032122C-6 C&H 48" Mat Cutters

There are 2 available.

We are currently waiting on model and photos.