Used
Picture Framing Equipment Lot: Cassese CS299M Ultra Underpinner & CTD D45 Double Miter Saw & Daige Gluer
SKU: UE-031721R
Date listed: March 17, 2021
*** From the manufacturer:
The new CS299M XL2 is designed to meet the needs of every framer looking for high quality joins and comfort of use, thanks to the adjustable fences and the new patented retractable Ultra clamps.
Wide joining capacity (190mm stroke ? 7 1/2?)
Ultra powerful Double-action ?Push and Tighten? rebate clamp
New retractable Ultra clamp system retracts into the table leaving a flat surface ? Great for big frames!
All air powered ? no electrical components to fail
Patented adjustable fences
Clamping of mouldings activated by foot pedal
Wedge firing activated by push button
Automatic position lock
Built-in extension arms for large frames
New magnetic XL adjustable top clamp
No tools required to change wedge?s sizes
No pressure adjustment required
Minimum service required
Technical Data:
Mouldings
Width
Height 1/4? ? 6? (5mm ? 150mm)
5/16? ? 3 1/2? (7mm ? 90mm)
Minimum Frame Dimensions: 3 5/16? x 3 5/16? (85mm x 85mm)
Stroke Length: 7 1/2? (190mm)
Net Weight: 133 lbs (60 kg)
Dimensions: L 490mm (19 1/4?) W 450 mm (17 3/4?) H 1100 mm (43 1/4?)
Power Supply: Compressed air at 100 lbs psi
Single Phase / 220V
- Blade Capacity:?10? OD, 12? OD, 14? OD Saw blades not included.
- Arbor: 5/8? with 2-1/4? saw collars.
- Spindle and Pivot: Both mounted on pre-loaded and sealed ball bearings.
- Iron Castings:?Saw arm, pivot brackets and table are precision machined and ground with milled slots in table to guide pivot brackets and fences.
- Motors and Voltages:1-1/2 HP single phase 115/230V and 3 phase 230/460V, totally enclosed fan cooled motors, 60 Hz, 3450 RPM with dual magnetic starter. Also includes rotary disconnect switch and blade guard interlock switch. Consult factory for amperage load of motors.
- Floor Stand:?Close coupled heavy gage steel stand completely enclosed with 6? dust outlet. 1200 CFM required.
- Table Height:?34-1/2? from floor.
- Blade Wear and Angular adjustments: Each saw head has adjustments for blade variation. Allows for precision alignment of blades to minimuze scrap. Saw heads are adjustable up to 3 degrees, always assuring perfect mitres.
- Length of stroke adjustment: The D45AX is unique in that the stroke of the machine and the position of the blade above the work can be adjusted to use only the stroke needed to cut a particular moulding or extrusion. Saw heads reverse immediately, on release of the foot valve, thereby saving wasted time and motion.
- Production Rate: The D45AX is capable of cycling at one second intervals. However, actual production rates vary with the type and width of material to be cut.
- Size: Standard machine, without tables or gages; weight 550 lbs. 46? wide x 22? front to back x 51-1/2? high.
- Actuation: Pneumatic foot valve with cover
- Air Pressure: 75 PSI with Air Filter/Regulator/Lubricator; includes Auto Drain.
- Air Consumption: 1.0 CF per 10 strokes at 75 PSI.
*** Manufacturer?s Information
MAXIT ADHESIVE SYSTEM:
? Superior performance, superior adhesion
? Costs thousands less than comparable coaters
? Lasts for decades
? Available in 12.5?, 24.5? and 36.5? coating widths
GREAT FOR ADHERING:
? Duplexed business cards
? Custom invitations
? Album and hard covers
? Wide format prints
? Presentations
? Custom labels
WHY MAXIT?
? No clean up of coater at end of day
? Provides a permanent bond to all surfaces
? Eliminates spray adhesive mess
? Eliminates warping from cold glues
? Costs less per sq. ft. than adhesive rolls and sheets
? Faster to apply the adhesive to media
expensive laminators.
Eliminates the hassles and expense of
outsourcing.
Faster than squeegeeing by hand.
Easy to use.
Costs thousands of dollars less than
comparable laminators.
Rugged Steel and aluminum
construction with heavy-duty motor.
Optional Footswitch.
How to Use Quickmount:
Comes with aluminum collars and
hubs for holding your laminate rolls
in
place. Belt driven take-up reel
automatically rolls up liner.
You can change laminate rolls in
less
than a minute.
Insert your board and use the two
knobs to set height and pressure of
top roller.
Cold Laminates
Daige carries a full line of cold laminates in three finishes: gloss, luster or
matte. Gloss is normally used when you need to add glossiness to your
finished print. Luster, the most popular finish, is used indoors to eliminate
glare and provides a very natural look. Matte is used when you want to
tone down the finish. Available in 25?, 38?, 51? and 54? widths.
Mounting
Quikmount rolls down prints to boards for fast, easy mounting.
It also applies double sided adhesives to boards by placing a roll of
adhesive
on the shaft instead of laminate
Quickmount Features
Non-stick silicone rubber on both
roller
cores.
Heavy-duty motor
Two knobs for setting top roller height
Large roller cores for even pressure
Automatic take-up reel.
Rugged steel and aluminum casing
Optional footswitch for hands-free
motor control
Specifications
Roller Widths 25", 38", and 55"
Board Thickness up to 1/2" board
Speed 8 seconds per foot (or71/2 ft. per
minute.)
Electrical 110 or 220 volts, 50/60 Hz
Outside dimensions
25" 16" W x 30" L
38" 16" W x 43" L
55" 16" W x 60" L
Roller Diameters 25" & 38" width - 2 1/2" and 55" = 3"
Roller Coverings Non-Stick Silicone
***Concerning "Used" Items: Although we strive for accuracy, some specifications are provided to us by the Seller. Cross-check with manufacturer for any difference between the machine being sold and what is stated in the manufacturer's information. Descriptions of condition of the equipment are not warranties. Descriptions are intended only as a courtesy and their accuracy is not guaranteed. Buyer inspection encouraged. There are no warranties or guarantees implied unless otherwise stated. All items are sold "As Is, Where Is, and With All Faults." No guarantee is made as to fitness for a particular purpose, implied or otherwise. Feel free to contact us if you have further questions before purchasing.
GET PRICINGAbout this Item
Pricing & Shipping
Shipping Notice: Unless specified on the product, items are FOB Origin. It is the responsibility of a customer to pickup, either personally or by a contracted shipping agent, their product.
Interested in the product? Fill out the form or call us at 330-405-9421 for pricing and other information.
Product is located in California. Customers can pick the machine up or have it shipped for an additional fee.
Get Pricing
Interested in the product? Fill out the form or call us at 330-405-9421 for pricing and other information.
Product is located in California. Customers can pick the machine up or have it shipped for an additional fee.
Can't Find the Equipment You Need?
We're constantly getting new listings. Let us know what you're looking for and we'll notify you when the equipment is available.
Turn Your Old Equipment Into Cash
No longer need your equipment? We can help.