Picture Framing Equipment Lot: ITW AMP VN42 Vnailer, Morso Chopper & Fletcher 3000 60" Cutter

From the seller: "All equipment in this lot are in good working condition unless otherwise specified below."

Machines can be purchased individually.  See below for pricing.

UE-051121A-1  ITW AMP VN42 Vnailer / Joiner / Underpinner  $ 1,500 (Sold)

From the seller: "Bought used about 10 years ago and never used. Still packed in original box. Includes extras shown in photos."

Manufacturer's Information:

The Mitre-Mite VN 42 has been designed for ease of operation and is particularly well suited for assembling larger frames. This machine comes with a height adjustable base and has a convenient tilt / roll feature which allows for easy movement around the shop. it can be operated from the front or back and has a dual stage foot pedal which allows the framer to see if the corner is properly aligned before nailing. After the framer sets the stops, the hand lever is then used to position the nail head for driving or stacking V-Nails' any where along the frame joint.

MACHINE SIZE: Width 14" / Length 19" / Height 33 to 43"" / Weight 150 lbs

Power Source: Pneumatic

FRAMING CAPABILITY: Frame Width 3/8" to 6 1/2" / Frame Height 1/4" to 4 1/2"

NAIL SIZES: 3, 5, 7, 10, 12, 15 mm

OPTIONAL ACCESSORIES: Wood Support Table, Metal extension wings,

UE-051121A-2  Morso Chopper  $ 995 (Sold)

From the seller: "Bought used about 10 years ago and never used. Still packed in original box. Includes extras shown in photos."

From the manufacturer:

Morso Model F Mitering Machine (Price new is $4,000 USD / about $5,100 CAD)

Morso Model F mitring machine cuts double mitre at 45° and single mitre up to 90°. Tenon, mortise joints, and a wide variety of angled cuts can also be made.

When using the Morso F, you will have no dust compared to a saw. Also, the waste of your moulding will be minimized as Morso F cuts double mitres very close, ( less than one mm waste of moulding ).

The mitre saw cannot do the mitres as close, and therefore the waste by using a saw, will always be minimum one centimetre.

One centimetre of waste does not sound of much, but if a calculation is done of 100 cuts a day, it actually turns out that the waste over a year is 260 meters waste of moulding…. ( That is only with 100 cuts a day…)

Morso F leaves the cut surface of the wood perfectly smooth and accurate, requiring no further preparation before joining. The horizontal movement of the knife block is stepwise adjustable. The sliding longitudinal stop and measuring scale ensure accurate repeat work.

The special lever system of the machine ensure a very easy operation. Twin return springs automatically bring the knives back to starting position.

Morso F is delivered with safety guard, waste chute, sliding longitudinal stop, measuring scale, adjustable fences ( 45° – 90° ), and adjustable rebate supports.

Morso F is manually operated with a foot pedal – needs no compressor or electricity and can therefore be operated anywhere.

Technical data for
Morso Model F Mitring Machine
Double mitre 45°
Single mitre up to 90°
Cutting width, max. 100 mm
Cutting height, max. 160 mm
Square cutting 65/65 mm
Measuring scale up to 1,500 mm
Net weight 90 kg

UE-051121A-3  Fletcher - Terry 3000 60" Multi Material Cutter  $ 950 (Sold)

Size: 60"

Includes extra blades and accessories shown in photos.
From the manufacturer:

The 3000 is the ideal product to make short work of the critical task of preparing your materials for framing. With its simplistic design and user-friendly cutting head, you will see an immediate improvement in accuracy and productivity in the first day of use. Our versatile 3000 unit features a three position cutting turret for glass, acrylics and mat board sizing. Equipped with a patented score and break-out feature, the 3000 unit provides effortless and operator-safe cutting with every use.

Available in 48" (1219mm) or 60" (1524mm) vertical cutting capacity.

Manufacturer's Information:

The Fletcher 3000® Wall Machine has a proven track record of success in frame shops worldwide. With its innovative and patented cutting process, the 3000 provides effortless cutting of the materials that matter to you most. The 3000 has quickly become the standard in picture framing for sizing of matboard, foamboard, glass and plastics; all with equal accuracy and consistency.

Patented glass cutting turret has a ramping feature that allows the lifting of turret device on top edge of glass resulting in a cleaner edge break.

Wall mounted or free-standing

Substrate Cutting Capabilities:

Glass: Up to 1/4" (6 mm)

Mirror: Up to 1/4" (6 mm)

Acrylic: Up to 1/4" (6 mm)

Matboard: 4, 8, 12 ply

Foamboard: Up to 1/4" (6 mm)

Technical Specifications:

Vertical Cutting Capacity: 48"

Cutting Head: Rides on high tensile strength steel, hard chrome plated and polished, resulting in smoother gliding action for consistent cutting head performance and longevity.

Vertical Bars: Rails do not bend or flex during the cutting process for straight, accurate cutting over the entire substrate height.

Material Clamping System: Patented lever-type clamping system that secures in place substrate heights up to 48" to prevent buckling and shifting of material during the cutting process.

UE-051121A-4 Print / Artwork Display Bin  $ 60 (Sold)

Print Sleeve Holder Used By Art Frame Shops