Picture Framing Equipment Lot

AGFS-19-1 GAPP 60" Canvas Stretcher Price $4,500 (Reduced from $6,000 !!!)

(SOLD)

From the Seller: "This used stretcher has been reconditioned. We replaced grippers. It is in good working condition"

***Manufacturer's Information:

The Stretch Master Production is a machine designed to cater for companies that have a need for producing high volumes at a high rate of speed with less effort by the operator. It is the only machine on the market that can stretch two sides at once.

Under the right production setup, it has the capacity to complete a stretched canvas in 30 seconds. It is a very strong, robust machine allowing for high rate of use. It stretches 1.6m (60") wide.

AGFS-19-2 Precision / Ledsome Double Miter Saw Price $1,500

Includes: Measuring table w/ flip stop, Dust collection System, mister for cutting metal, extra blades, and a replacement belt

From the Seller: "This is a quality heavy performing machine, with a built-in vacuum prefilter and parts handler, it cuts wood frames or Aluminium (change blades included). An oiler is included for metal cutting. It comes with a calibrated mitre measuring system and two Flip stops for ease and accuracy of measuring/cutting. The hood has adjustable openings for different profiles of frame. It is a hands-free operation, using a step pedal to bring the blades into play with the material. This tool was reconditioned two years ago and comes with two metal cutting blades, and an extra belt. It is unknown how old this particular machine is."

***Manufacturer's Information:

The Model #1000 12" Double Mitre Saw is a wood saw with a 4-1/4" cutting capacity -- a full 1" more than some other 12" saws. The Model #1000 gives you the same perfect 45 mitre as our other models but we have taken some of the extra cost off. The Model #1000 is equipped with one set of 90-tooth lazer blades - the finest mitre blade available - one production stop, a 60" stainless measuring scale (increments of 1/8"), one chipbreaker, ...The Model #1000 runs two 1-HP, 3450 RPM motors on single-phase 220 electricity and it is foot operated. Optional equipment available includes a 120" scale. Saw vac included.

Dimensions: Height 46", Depth 31", Width 81"
Scale 60" Cut Cap. 4-1/4" Foot Operated
Motors; 2, 1 HP, 3450 RPM, 220v Single Phase
Blades; 2, 12" x 90 tooth

Specifications for this saw can be found on the manufacturers website at: www.ledsome.com/12saws.htm#1000

AGFS-19-3 Fletcher 2100 48" Mat Cutter Price $600

Manufactured: January 2002

Includes: 3 Measuring stops, Base extension, Right squaring Extension arm, and Clamp Lifters & extra Blades.

AGFS-19-4 Fletcher 3000 60" Glass Cutter Price $700

This multi-material cutter will cut matboard, glass, plexiglass

Manufactured 12 / 95

Features a 3-position cutting turret containing a glass scoring wheel, scoring tip for scoring acrylic materials and a cutting blade for picture frame mat board and foam board materials up to 1/4? (6mm). A ramping feature allows the lifting of scoring wheel on top edge of glass resulting in a cleaner edge break when scoring glass. Handles material sheets up to 60? high (1.52m). Mounts on wall or freestanding installation.

AGFS-19-5 Clearmount Miter Saw & Fence System Price $500

Includes: Miter Saw Scale, a Makita LS1040 10" Miter Saw and one carbide tipped blade.

***Manufacturer's Information:

These scales are silk screened on the aluminum and guaranteed not to wear off.

The custom extruded aluminum base assures you of true and accurate miters.

Eliminate Chip Out on the back of your moulding

The scale is shipped preassembled. It takes no time to set up.

Our scales are compatible with most 10" and 12" miter saws, including compound and sliding compound

AGFS-19-7 Drytac JetMounter Series Table-Top Laminator Price $500

Size: 26" Rollers

Table-top electric laminators.

***Manufacturer's Information:

This JetMounter model is a motorised table-top laminator operated by a foot switch, leaving both hands free to handle the work being processed. Designed for mounting and laminating inkjet output, it is capable of handling photographic or any printed media. All models include a supply shaft for safety protection. Features include a 1 in (25mm) nip opening, speed control up to 18ft (5.5m) per minute, and a media guide to keep images on the roller when mounting.

AGFS-19-8 Geo Knight Heat Press 16x20" Swing Away Price $750

Model: K20S
Includes: Supplies and Accessories

***Manufacturer's Information:

Our extra Platten and riser makes it faster and easier to use as you can layout work on one Press while the other is "cooking", then lift the head, swing the press to the other position, and unload & reload the first platten. This is custom built to fit this press.

The Digital Knight Swing away 16x20" press represents the most popular line of heat press machines. Because this design Swings completely out of the way of the table, these presses provide complete access to load and unload materials and layout transfers. The heat platen is always face down, and regardless of the height of the product being pressed, it is always pressed evenly & level. The Digital Combo multipurpose press also falls within this category as well.

The design of the Digital Knight swing-away presses combines a heavy-duty solid steel industrial grade pressing framework with accurate and easy to use electronics. This provides the operator with the best possible features and equipment needed for today's various heat transfer applications.

The heat platen uses SuperCoil-Microwinding heater technology, a system of embedded heater windings that wind tightly and closely together throughout the entire platen for extremely even heat, fast recovery & fast heat up times.

The controller utilizes an easy to read oversized-digit LCD display to show time and temperature simultaneously, and the temperature readout is accurate within +-2 degrees. The controller also features a digital height/pressure gauge for displaying current height settings. The operator can use the 70 programmable presets for saving common application settings of Temp/Time/Pressure, ensuring consistent, repeatable results for all applications. The press is adjustable to accommodate materials from fabric thickness all the way up to 1" thick substrates!

AGFS-19-9 Frame Square Fillet Cutter w/Scale Price $100

AGFS-19-10 AMS Omer Long Nose Stapler / Staple Gun Price $125

From the Seller: "The AMS Long Nose Stapler has the advantages of other AMS pneumatic staplers, but it has an elongated 2 inch nose and a ring to connect a balancer for precision. This stapler can be used where it is difficult to staple with a normal stapler. The long nose is used with canvas stretching on the Gapp Stretching Machine. This Stapler's 10mm (3/8") wide crown is for use with staples ranging in leg length from 4mm to 16mm (3/32" to 5/8"). A supply of pins is included"

AGFS-19-11 AMS Omer Pinner Price $125

From the Seller: "The AMS micro pinner tool inserts headless pins into wood mouldings. These pins can barely be seen -- hence this tool is ideal to use for assembling shadow box frames. This gun is made by Omer and uses the pins. A supply of pins is included. I used this in conjunction with the AMS Balancer which is included with purchase (part# 938045). Designed & Used for balancing or taking the weight off staplers and Pinners so that workers don't suffer from repetitive stress injuries."

AGFS-19-12 Pallet Jack Niuli JH 2500kg Price $200

Manufactured in 2010

***Manufacturer's Information:

Whole casting hydraulic pump
Integrated valve core
Plastic coated handle comfortable
Powder coated chassis made of high-grade steel
Body welding by auto machine

Model: CBY AC
Min fork height: mm 85
Max fork height: mm 195
Max lifting height: mm 110 (4.25?)
Fork width: mm 685 (27")
Fork length: mm 1220 (48")
Fork size: mm 160x50 (63x19.75?)
Load roller single wheel: mm 80x93
Load roller tandem wheel: mm 80x70
Steering wheel: mm 180x50
Material of wheel: Nylon/polyurethane

AGFS-19-13 Seal Masterpiece 500T Mechanical Heat Press Price $500

From the Seller "Pad is in good shape, needs a new heating element."

(Parts are available for purchase from this website)

AGFS-19-14 Traco SS-40DS SuperSeale 40" Deluxe I-Bar Sealer Shrink Wrap Machine Price $200

(SOLD)

Model: SS-40DS

***Manufacturer's Information:

Seal larger bags with this extra-long tabletop sealer.

Durable steel construction. No warmup time needed.

Convenient carry handle to easily move production area.

AGFS-19-15 Dehnco Automatic 60" Sheeter / Feeder & Cutter System Price $4,500

(SOLD)

From the Seller: "This used cutter is in Good Working Condition."

Manufactured: About 2003

***Manufacturer's Information:

Typical application:

Dehnco Sheeters store, feed and cut roll materials into sheets automatically. Eliminate inefficient manual converting operations.

The sheeter will can be configured to produce batches of sheets to a preset length. Other preset combinations are also available. (Control Modules)

The system feeds material up to 30-inches per second. The unique flying cutting system cuts the material cleanly in both directions.

Manufacturer's Website: http://www.dehnco.com/products/automaticcuttersystem.cfm

AGFS-19-16 ITW AMP (AMP International) Mitre Mite VN2+1 Vnailer Price $650

(SOLD)

From the Seller "This joiner / underpinner comes with foot pedal, a variety of padded magnetic heads to hold frames in place while nailing, 4 boxes of even nails, and an Allen key for adjustments.

***Manufacturer's Information:

The Mitre-Mite VN2+1 is a bench top frame assembly machine and is ITW's most popular model with the custom framer. It is compact and well constructed, built for many years of trouble-free operation. With this machine, the Framer sets the front and back stops for v-nail insertion. The frame is then moved across the nail head and v-nails can be driven or stacked anywhere along the frame joint. Other features include a pneumatic load/feed system to eliminate jams, "soft clamp" pneumatics for damage free joints, and a "quick change" hold down to fit most profiles.

MACHINE SIZE: Width 12" / Length 19" / Height 14" / Weight 75 lbs
Power Source: Pneumatic
FRAMING CAPABILITY: Frame Width 3/8" to 5" / Frame Height 1/4" to 5 1/4"
NAIL SIZES: 3, 5, 7, 10, 12, 15 mm

AGFS-19-6 Drytac Hot / Heated Vacuum Press 4050 Price $1,500

(SOLD)

40"x 50" working area

Includes: New vacuum bladder & blanket, vacuum pump. and tacking Iron

Features: Automatic Electric Timer, Manual Override Switch

Used for mounting Photos, Prints, and More