Picture Framing Equipment Lot

AGFS-98a Pistorius EMN-12 Double Miter Saw $1,250

(SOLD)

This saw is widely used in the picture framing, as well as door and window manufacturing.

Includes measuring table and stop

***Manufacturer's Information:

Pistorius EMN12 Double Miter Saw

- Cutting Capacity: 4 7/8" W x 3 3/8" H
- Sawblade capacity: 12" blades
- Arbor 5/8"
- Air pressure requirements 65 PSI.

AGFS-98b Morso Chopper $700

(SOLD)

Used by picture framing to miter cut frame moulding to make picture frames.

Includes measuring table and stop.

***Manufacturer's Information:

Morso Model F Mitering Machine

Morso Model F mitring machine cuts double mitre at 45° and single mitre up to 90°. Tenon, mortise joints, and a wide variety of angled cuts can also be made.

When using the Morso F, you will have no dust compared to a saw. Also, the waste of your moulding will be minimized as Morso F cuts double mitres very close, (less than one mm waste of moulding.)

The mitre saw cannot do the mitres as close, and therefore the waste by using a saw, will always be minimum one centimetre.

One centimetre of waste does not sound of much, but if a calculation is done of 100 cuts a day, it actually turns out that the waste over a year is 260 meters waste of moulding! That is only with 100 cuts a day!

Morso F leaves the cut surface of the wood perfectly smooth and accurate, requiring no further preparation before joining. The horizontal movement of the knife block is stepwise adjustable. The sliding longitudinal stop and measuring scale ensure accurate repeat work.

The special lever system of the machine ensures a very easy operation. Twin return springs automatically bring the knives back to starting position.

Morso F is delivered with safety guard, waste chute, sliding longitudinal stop, measuring scale, adjustable fences (45° x 90°), and adjustable rebate supports.

Morso F is manually operated with a foot pedal, needs no compressor or electricity and can therefore be operated anywhere.

Technical data for Morso Model F Mitring Machine
- Double mitre: 45°
- Single mitre: up to 90°
- Cutting width, max.:100 mm
- Cutting height, max.: 160 mm
- Square cutting: 65/65 mm
- Measuring scale up to: 1,500 mm
- Net weight: 90 kg

AGFS-98c Oval Master Oval / Circle Cutter $250

(SOLD)

AGFS-98d Stanley 400 Framing Vises $150

(SOLD)

Quantity: 4

AGFS-98e Cassese CS 910 / CS 810 Vnailer / Joiner / Underpinner $500

(SOLD)

This Vnailer / Joiner / Underpinner are used by framers to join frame moulding corner in picture framing process.

***Manufacturer's Information:

Cassese CS810 / CS910 Underpinner

Quick and easy set up for a new moulding.

Pre-set plunger requires no adjustment for moulding height.

Locking plunger forces corner to be flush on top.

Strong pneumatic clamp pulls moulding together and holds corner tightly.

Adjustable mitre angle and tilting fences.

Adjustable table height (36" to 45").

Safe, two step firing system eliminates accidental wedge firing.

Built-in air filter/regulator plus on/off air switch.

Optional Hexagon and Octagon attachments included

Weight: 110 lb

Dimensions: L -16" x W -13" x H -55"

AGFS-98f Assorted Lengths of Wood Moulding $50

(SOLD)

AGFS-98g Assorted Framing Hardware & Materials $25

(SOLD)