Picture Framing Equipment Lot: Wizard 5000 CMC, Fletcher 3100 Cutter, Cassese CS79 Joiner, Seal Masterpiece 500T-X Press, Morso Chopper, Shrink Wrapper, & Fletcher 3000 Multi Material Cutter

UE-032123A-1 Wizard 5000 Computerized Mat Cutter

(SOLD)

***Manufacturer's Information:

Computerized Mat Board Processing Equipment

UE-032123A-2 Fletcher 3100 Multi Material Cutter (X-ACTO Elite)

(SOLD)

***Manufacturer's Information:

The Fletcher 3100 Multi-Material Cutter is a versatile Wall Cutter designed with an interchangeable cutting head platform that uses multiple cutting blades, scoring tips and cutting wheel holders for cutting and scoring a large variety of materials. Handles material sheets up to 63"" high (1.6m) and features an acrylic breakout function. Mounts on wall or freestanding installation.

Multi-Material Cutting Capabilities:
- Glass Up to 1/4" (6mm)
- PVC Up to 1/4" (6mm)
- Plastics & Acrylics Up to 1/4" (6mm)
- Aluminum Sheets Up to .040"
- MDF Up to 3/32" (2.4mm)
- ACM Up to .078" (2mm)
- Gator Board Up to 1/2" (13mm)

Unique Performance Features:
- Interchangeable Cutting Head Technology
- Cuts clean, debris-free, no secondary processing
- Mounts on wall or free-standing
- Cuts wide range of substrates

Tech Specs & Dimensions:
- Vertical Cutting Capacity: 63" (1.6m)
- Cutting Head: Rides on high tensile strength steel, hard chrome plated and polished, resulting in smoother gliding action for consistent cutting head performance and longevity.
- Vertical Bars: Rails do not bend or flex during the cutting process for straight, accurate cutting over the entire substrate height.
- Material Clamping System: Patented lever-type clamping system that secures in place substrate heights up to 60" (152cm) to prevent buckling and shifting of material during
the cutting process.

Wall Mounting Specs & Dimensions:
- Height: 78" (241cm)
- Width: 80" (203cm)
- Depth: 17" (43 cm)
- Weight: 90 lbs (41kg)
- Wall Space: 42.6 sq. ft. (3.96sqm)
- Cut Capacity: 63" (160cm)
- Shipping Weight: 100 lbs. (45kg)

UE-032123A-3 Cassese CS79 Manual Frame Joiner

(SOLD)

***Manufacturer's Information:

The CS79 Foot Operated Underpinner requires no air or electrical for its fast and easy operation. Creates perfect joinings with foot power! This easy-to-use underpinner is perfect for the entry-level custom framer.

- Foot operated Underpinner
- No air or electrical power required
- Fast and easy to use
- Solid construction with minimal servicing required
- Adjustable fences
- No adjustment required for top presser when changing from small to tall mouldings within 35mm difference in height (1 ½”)
- No adjustment required when changing from softwood to hardwood
- No adjustment or change of parts required when changing the size of wedges used
- Can be used from front or rear just by turning the top of the machine (no tools needed)
- “Wedge Fully Inserted” indicator light

UE-032123A-4 Seal Masterpiece 500T-X Mechanical Heat Press

(SOLD)

***Manufacturer's Information:

Seal Masterpiece 500T-X. It is Seal's largest format mechanical press and used by framing professionals. Applications for this press include mounting, laminating and applying texture to large photos, artwork and posters.

Specifications

- 26" x 34" Platen Size
- Solid State Thermostat for Accuracy and Electrical Economy.
- Easy Reading Thermostat
- Mount up to 52" x Infinity
- Shipping Weight - 275 lbs.
- Power Requirements - 120 Vac 12 Amps

UE-032123A-5 Morso Chopper w/ Measuring Table & Stop

(SOLD)

From the Seller: "Includes Extra Set of Blades"

***Manufacturer's Information:

Morso Model F Mitering Machine

Morso Model F mitring machine cuts double mitre at 45° and single mitre up to 90°. Tenon, mortise joints, and a wide variety of angled cuts can also be made.

When using the Morso F, you will have no dust compared to a saw. Also, the waste of your moulding will be minimized as Morso F cuts double mitres very close, (less than one mm waste of moulding.)

The mitre saw cannot do the mitres as close, and therefore the waste by using a saw, will always be minimum one centimetre.

One centimetre of waste does not sound of much, but if a calculation is done of 100 cuts a day, it actually turns out that the waste over a year is 260 meters waste of moulding! That is only with 100 cuts a day!

Morso F leaves the cut surface of the wood perfectly smooth and accurate, requiring no further preparation before joining. The horizontal movement of the knife block is stepwise adjustable. The sliding longitudinal stop and measuring scale ensure accurate repeat work.

The special lever system of the machine ensures a very easy operation. Twin return springs automatically bring the knives back to starting position.

Morso F is delivered with safety guard, waste chute, sliding longitudinal stop, measuring scale, adjustable fences (45° x 90°), and adjustable rebate supports.

Morso F is manually operated with a foot pedal, needs no compressor or electricity and can therefore be operated anywhere.

Technical data for Morso Model F Mitring Machine
- Double mitre: 45°
- Single mitre: up to 90°
- Cutting width, max.:100 mm
- Cutting height, max.: 160 mm
- Square cutting: 65/65 mm
- Measuring scale up to: 1,500 mm
- Net weight: 90 kg

UE-032123A-6 UMS Shrink Wrap Machine

(SOLD)

***Manufacturer's Information:

40 inch shrink wrap machine

1. Insert products into folds of film.
2. Depress arm to cut and seal film - tear away.
3. Use a heat gun to shrink film around a product.

UE-032123A-7 Fletcher 3000 Multi Material Cutter

(SOLD)

The Fletcher 3000 features a 3-position cutting turret containing a glass scoring wheel, scoring tip for scoring acrylic materials and a cutting blade for picture frame matboard and foam board materials up to 1/4" (6mm). A ramping feature allows the lifting of scoring wheel on top edge of glass resulting in a cleaner edge break when scoring glass. Handles material sheets up to 60" high (1.52m). Mounts on wall or freestanding installation. Available in 48" (1219mm) or 60" (1524mm) vertical cutting capacity.

Substrate Cutting Capabilities:
- Glass: Up to 1/4" (6 mm)
- Mirror: Up to 1/4" (6 mm)
- Acrylic: Up to 1/4" (6 mm)
- Matboard: 4, 8, 12 ply
- Foamboard: Up to 1/4" (6 mm)

3-Position Turret Cutting Head:

The 3000 Wall Machine features a 3-position cutting turret that contains a glass cutting wheel unit, plastic scoring blade, and mat/form board cutting blade mounted in their respective positions on the turret for quick changeover from one material to another.