ITW AMP T-350 Double Mitre Saw w/ Programmable measuring Gauge

***Manufacturer's Information:

Alfamacchine and AMP brands . Please note there are difference between the T400 and the T350. Contact the manufacturer for details.

T-400 Double Mitre Saws cut precise 45 degree mitres in wood, plastics and metal with moulding height up to 3" (80mm) and moulding width up to 4" (100mm).

The T-400 Saw is designed to cut 45 degree mitres precisely for picture framing and woodworking applications such as windows, doors, and furniture components. The T-400 can handle all wood, plastic, and metal materials with a moulding height up to 3 ?" (80mm) and a moulding width up to 3.937" (100mm).

This heavy duty saw is built for medium to high production environments. Its unique pneumatic control system results in a very smooth down-stroke movement, precise cut, and a quick return process. Two saw blades are fixed at 45 degree angles and vertically move up and down. With each stroke, the two mitres are cut from the moulding with the least amount of scrap. During the cutting process, the moulding is held firmly in place by four pneumatic clamps ensuring high quality cutting.

Features & Specifications:

Vertical movement Double Mitre Saw with two blades fixed at 45 degree angle.

The saw is suitable for cutting mitres for picture frames, furniture frames, window and door frames.? The saw is unique because it uses a special pneumatic system of low pressure air springs which support the weight of the motor's blades and brackets.

This feature allows the activating cylinder to move the assembly downward with extreme smoothness during the cutting interval and return quickly after cutting.? Vertical pneumatic clamps hold the molding firmly on the cutting table during the cutting and return cycle.

Standard Equipment:

2 HP 220 volt - 3 Phase Motors * Electronic Controls * Four Pneumatic Hold Down Clamps (2 Each Side-Adjustable) * Totally Enclosed Heavy Gauge Steel Cabinet * Vacuum Collection Port 4" * Built-in Chip Chute * Center Chip Support * Staggered Blades *  Adjustable Speed Down-stroke * Adjustable Length of Stroke * 80mm & 110mm Blade Flanges * In-feed Table * Out-feed Table with 52" Measure Gauge and Manual Stop * Extra Flip Stop for Measure Gauge * Built-In reserve Air Tanks in Saw Cabinet * Fine Adjustments for 45 Degree Angle and Blade Wear.

Safety Features:

Lock-Out Main Power Switch * Dual Actuator Buttons Lower Blades * Emergency Stop Button * Adjustable Lucite Blade Shield Safety Cover * Front Cover Safety Switch (cuts Power If Opened) * Separate Footpedal to Activate Clamping Of Moldings.

Options Available:

Saw Blades - Wood or Non-Ferrous * Measurement Table Extension (Additional 40" to 92" Length) * Mist Lubrication System for Aluminum Moldings * Special Order t-400 Size Saw (400mm Blades Cuts to 4 1/2" Width) * Special Order 440 Volt - 3 Phase Motor.

Cutting Capacity:

Width

T-350 110mm Flanges  3 3/16"

80mm Flanges 3 1/2"

T-400 80mm Flanges  4 1/2"

Height Adjustable to 4" Depending on Width

Specifications:

Standard Motors 2HP, 220 V 60 HZ 3 Phase with Thermal Overload Protection * Minimum Circuit Required 30 Amps * Speed of Motors - Approx. 3300 RPM