Equipment Lot: ITW AMP VN42 Frame Joiner, Morso Chopper w/ Measuring Table, Fletcher 3000 60" Multi Media Cutter, Bienfang / D&K Expression 550 Mechanical Heat Press, Wizard 5000 CMC - Computerized Mat Cutter, & Supplies: Matboard, Moulding, Glass

UE-051524A-1 ITW AMP VN42 Frame Joiner

(SOLD)

***Manufacturer's Information:

ITW AMP VN42:

The Mitre-Mite VN 42 has been designed for ease of operation and is particularly well suited for assembling larger frames. This machine comes with a height adjustable base and has a convenient tilt / roll feature which allows for easy movement around the shop. it can be operated from the front or back and has a dual stage foot pedal which allows the framer to see if the corner is properly aligned before nailing. After the framer sets the stops, the hand lever is then used to position the nail head for driving or stacking V-Nails anywhere along the frame joint.

MACHINE SIZE:

- Width 14"
- Length 19"
- Height 33 to 43"
- Weight 150 lbs
- Power Source: Pneumatic

FRAMING CAPABILITY:

- Frame Width 3/8" to 6 1/2"
- Frame Height 1/4" to 4 1/2"

NAIL SIZES:

- 3
- 5
- 7
- 10
- 12
- 15 mm

UE-051524A-2 Morso Chopper w/ Measuring Table

(SOLD)

***Manufacturer's Information:

Morso Model F Mitering Machine

Morso Model F mitring machine cuts double mitre at 45 degrees and single mitre up to 90 degrees. Tenon, mortise joints, and a wide variety of angled cuts can also be made. When using the Morso F, you will have no dust compared to a saw. Also, the waste of your moulding will be minimized as Morso F cuts double mitres very close, ( less than one mm waste of moulding ). The mitre saw cannot do the mitres as close, and therefore the waste by using a saw, will always be minimum one centimetre. One centimetre of waste does not sound of much, but if a calculation is done of 100 cuts a day, it actually turns out that the waste over a year is 260 meters waste of moulding. ( That is only with 100 cuts a day) Morso F leaves the cut surface of the wood perfectly smooth and accurate, requiring no further preparation before joining. The horizontal movement of the knife block is stepwise adjustable. The sliding longitudinal stop and measuring scale ensure accurate repeat work. The special lever system of the machine ensure a very easy operation. Twin return springs automatically bring the knives back to starting position. Morso F is delivered with safety guard, waste chute, sliding longitudinal stop, measuring scale, adjustable fences ( 45 degrees & 90 degrees), and adjustable rebate supports. Morso F is manually operated with a foot pedal - needs no compressor or electricity and can therefore be operated anywhere.

Technical data for Morso Model F Mitring Machine:

- Double mitre: 45 degrees
- Single mitre: up to 90 degrees
- Cutting width: max. 100 mm
- Cutting height: max. 160 mm
- Square cutting: 65/65 mm
- Measuring scale: up to 1,500 mm
- Net weight: 90 kg

UE-051524A-3 Fletcher 3000 60" Multi Media Cutter

***Manufacturer's Information:

The Fletcher 3000 features a 3-position cutting turret containing a glass scoring wheel, scoring tip for scoring acrylic materials and a cutting blade for picture frame matboard and foam board materials up to 1/4" (6mm). A ramping feature allows the lifting of scoring wheel on top edge of glass resulting in a cleaner edge break when scoring glass. Handles material sheets up to 60" high (1.52m). Mounts on wall or freestanding installation. Available in 48" (1219mm) or 60" (1524mm) vertical cutting capacity.

Substrate Cutting Capabilities:
- Glass: Up to 1/4" (6 mm)
- Mirror: Up to 1/4" (6 mm)
- Acrylic: Up to 1/4" (6 mm)
- Matboard: 4, 8, 12 ply
- Foamboard: Up to 1/4" (6 mm)

UE-051524A-4 Bienfang / D&K Expression 550 Mechanical Heat Press

***Manufacturer's Information:

The Expression (EXP) 550 Mechanical Press is designed to provide consistent heat and uniform pressure for mounting, laminating, or texturing large items including photos, plaques, and artwork. The 550 Mechanical Press has an easy-to-read digital display with touch pad controls. Factory presets programs are also installed for processing popular applications. The 550 Mechanical Press can process large pieces up to 51? wide by any length.

Features:

- Digital display.
- Touch-pad controls.
- Preset programs for running common applications.
- Capable of finishing pieces even larger than the press itself.
- Durable framework.
- U/L listed.

UE-051524A-5 Dewalt Miter Saw w/ Phaedra Measuring System

UE-051524A-6 Wizard 5000 CMC - Computerized Mat Cutter

***Manufacturer's Information:

Computerized Mat Board Processing Equipment

UE-051524A-7 Assorted Framing Supplies: Matboard, Moulding, Glass

(SOLD)