Ledco Workhorse HD-25 25" Laminator

Ledco Workhorse HD-25 25" Laminator

• Model Number: HD25
• Item Under Warranty: No
• Can Item Be Inspected On-Site: Yes

*Primary photo of machine is representation for example. Photos of the wrapped machine represent actual machine available for purchase.

***Manufacturer's Information:

Here are the features that contribute to making a machine people naturally call a "Workhorse".

• Intelligent heat controllers: These heat controllers display both the set temperature and the actual temperature. The microprocessor in the control quickly learns to anticipate the heat demand of each job and keeps the actual temperature within a few degrees of the set temperature.
• Laminating and pull rollers: These rollers are covered with quality silicone rubber for superior release quality, higher lamination quality, and easier cleaning. The laminating rollers and pull rollers are interchangeable.
• Removable heat shoes: These shoes are teflon coated to reduce film abrasion. They are easily unplugged and removed to clean or replace the laminating rollers.
• Built-in retractable slitters: These slitters save an enormous amount of cutting time by trimming away side scrap during the lamination process. The two heads can be adjusted independently with great precision.
• Dual tension knobs: The dual tension knobs (clutches) for each supply roll mandrel are easy to use and provide as little or as much tension as needed to keep work wrinkle-free.
• Forced air cooling: Cooling is essential when running thicker films, because the lamination needs to be cooled to get good results.
• Easy access controls: The controls are conveniently located and grouped for effective operation.
• Safety guard: A safety guard is built into the feed tray to help insure it will always be in place when laminating.
• Upper and lower rollers are driven: Both the upper and lower rollers are driven to minimize the wrinkling or curling that can occur when only one roller is driven.
• Made in the U.S.A.: The HD-25 is made in the U.S.A., making parts a lot closer to you should they be needed.
• All electrical components conform to NRTL standards

Specifications

• Max. lamination width 25"
• Speed 0-25 FPM
• Laminating roller diameter 1 1/2"
• Supply Roll Core Size 3" Standard, Available (Optional 2 1/4" or 1")
• Laminating film thickness To 10 mil
• Max. laminating thickness 1/2"
• Max. film roll diameter 12"
• Dimensions 38"L 51"H 25"D
• Weight 285 lbs
• Shipping Weight 560 lbs, 56"L x 43"W x 60"H
• Electrical 208-240V, Single Phase
• 16 amps
• 50/60 Hz, 3000 watts
• Motor 1/4 HP DC