Seal Sealeze FAH 82 Wide Format Heated Laminator

***Manufacturer's Information:

From the manufacturer & Web:

Features:

- The Sealeze FAH series was designed for continuous roll-to-roll and sheet-fed finishing of extra-large graphics, banners, billboards, and architectural prints:
- Heat-Assisted Roller: The upper heated roller eliminates "silvering" (tiny air bubbles trapped under pressure-sensitive overlaminates) by slightly warming and softening adhesive layers during application.
- Mounting & Encapsulation: Capable of single-sided overlamination, double-sided encapsulation (depending on web setup), and mounting prints directly onto rigid substrates such as foam board, Gatorfoam, and PVC.
- Roll-to-Roll & Feed: Equipped with unwind shafts, release-liner take-up spools, infeed worktable, and an outfeed cooling/catch area.
- Foot Pedal Operation: Includes a heavy-duty footswitch allowing hands-free operation to guide and square up oversize prints into the nip.

Specifications:

- Manufacturer: Seal Products, Inc. (Naugatuck, CT)Series /
- Model: Sealeze 82 FAH
- Max Working Width 82 inches (~2,083 mm)
- Roller Configuration: Dual roller system; heated top roller with high-release silicone coating
- Maximum Nip Opening~1.0 in to 1.5 in (supports mounting to thick rigid boards)
- Operating Speed: Variable speed, typically up to 15–20 ft/min (approx. 4.5–6 m/min)
- Nip Pressure Adjustment: Mechanical / pneumatic screw or lever-assisted pressure adjustment
- Temperature Control: Adjustable electronic thermostat (ambient up to ~250°F / 120°C for heat-activated films and thermal assist)
- Controls: Forward / Reverse switch, variable speed dial, temperature controller, foot pedal control, emergency stop
- Electrical Requirements220V–240V AC, 1-Phase, 50/60 Hz, typically 20A–30A (due to the high-wattage heating element across 82 inches)