CTD Model N80 Double Miter Toe Kick Saw

From the seller: "This used saw is in good condition."
230 Volt
60 Cy
3 Phase
From the manufacturer:
The Model N80 is used for a variety of cutting applications including 45° double mitre cutting, notching and bending of aluminum and plastic extrusions, or toe-notching of wood panels. This heavy duty machine can have blades set for notching or mitering. Blades move vertically on linear bearings on 1" (25mm) hardened and ground rods. Keyed fences allow for each set-up and accurate dimensional changes.
N80-N90 Manual.pdf
N80-N90 Manual.pdf
Specifications
Vertical Frame and Notching Saw
Blade Capacity: 13"
2 H.P. 3phase
Magnetic Starter
3450 RPM
Cutting Capacity:
Toe Notch Con g.: 4½"X4½" deep X3" high
Mitre: 3½ (wide)X 3" ( 3½" X 5" available with extra charge)
Blade Capacity
13" OD (330mm); saw blades not included.
Arbor
1" (25mm) with 3" (76mm) saw collars; mounted on preloaded and sealed bearings; 2-belt drive; 3450 RPM of spindle.
Motors & Voltages
Two, 2 H.P. 3 Phase 230/460 Volt Totally Enclosed Fan Cooled Motors, 60 Hz, 3450 RPM with Dual Magnetic Starter; 3 H.P. Motors available.
Floor Stand
Heavy gage steel; stand is completely enclosed with 6" (152mm) dust collector outlet and scrap chute; 1200 CFM required.
Actuation
Air operated by foot valve with cover.
Air Pressure & Consumption
3 CFM at 80 PSI (.09 cubic meters/minute at 5.6 kg/cm2) based on 10 strokes per minute; includes air filter/ regulator/lubricator with auto drain.
Size & Weight
43" (109cm) Wide x 38" (97cm) front to back x 58" (147cm) High; Weight 750 lbs. (340kg).
Production Rate
Up to 15 strokes per minute.
Cutting Capacity
Staggered Saw Blades/ Toe-Notch Configuration; 4-1/2" (114mm) x 4-1/2" (114mm) Deep x 3" (76mm) High
Mitre Cutting/Staggered Saw Blades; 3-1/2" (89mm) Wide x 3" (76mm) High
Mitre Configuration/Non-Staggered Saw Blades; 3-3/8" (86mm) Wide x 3" (76mm) High; up to 5" (127mm) High with special blade guard modification at extra charge.