Eastman M9000 Routing & Cutting Table (used) Item # UE-101221C (Washington)

SKU: UE-101221C

Eastman M9000 Routing & Cutting Table

From the seller: ”  In good working order. We used this Eastman M9000, which is a single ply drag knife,  sporadically.  The software is Easicut 2.4 with a screen shot attached. The software has the punch option and it looks like we have the position for the tool in the cutting head, with room for 3 tools and the pen. You can see we had the round knife attachment, but we really only used the drag knife, and didn’t venture much beyond that tool for what we needed it for. I don’t see that I have a punch. “

Year Manufactured: 2012

Gerber M Series Digital Finishing System with Turbo router

Model M3000GS

Tooling included

Gerber Omega software with Composer and ARTpath

Built 2012 and used lightly for R & D, and intermittently for samples / small lot production of foam pads.

Still operational and in good working order, but has not been used for several years.

Reason for selling is that the program ended and has not been used since.

Click Here to Contact Us for Pricing

Customers can pick this item up in Washington or have it shipped for an additional fee.

***From the Manufacturer:

Eastman‘s M9000™ Static Cutting Table provides superior cutting performance and increased throughput. Capable of marking, cutting, drilling and punching virtually any flexible material at speeds of up to 60 inches per second (152.4 cm/s); the M9000 registers accuracy of +/- .015 inches (.4 mm), with higher accuracies available. The user interface of Easicut™ is virtually intuitive. It is easy to control tool
types, speeds, accelerations, and restart a file, or recut pieces. Easicut™ aids efficiency by removing common lines, duplicate entities, and edge cuts. Material is spread across the static table and its internal blower system ensures material hold-down for cutting accuracy.

• Single-or low-ply layer cutting
• Open vacuum system design for evenly dispersed
• Optimal material hold-down across the cutting surface
• Standard three tool cutting head
• Standard porous plastic table top
• Optional Lexan®, Urethane, PVC and microfiber
table tops
• Consistent high-speed cutting and repeatable
• Ideal for prototyping and sample making
• Optimum material yields, labor savings and lower
operating costs
• Compatible EasiCut™ software accepts CMD, DXF,
EPS, GBR, NST, CEI and many other file formats
• Standard and custom vacuum zoning available
• Four remote emergency stops: two on gantry, two
table mounted
• Diode laser pointing alignment tool
• Onboard control panel with alphanumeric user
interface terminal

Software: Windows operating system
Drive Power: Dual-X, Y and Theta Axis “Brushless” Servo Motors
(includes industrial amplifiers and closed loop encoders)
Drive System: Rack and Pinion Drive
Cutting & Plotting Speed: 60 inches per second (152.4 cm/s)
Acceleration: 1.3Gs
Electrical Requirements:
Control PC and Drive System: 120/240V, 50/60Hz, 3.6 KVA; Vacuum
Blower: 230V/460V standard (other voltages available); 3 Phase
50/60/Hz, 7.5 HP
Compressed Air Requirements: 75-100 psi. @ 15 scfm
Sound Level: <75 dbA
Standard Sizes**:
Active Cutting Widths: 60 in. (1.5 m), 72 in. (1.8 m), 78 in. (2.0 m),
96 in. (2.4 m), 108 in. (2.7 m) and 114 in. (2.9 m). Custom widths
available in 6 in. (15.2 cm) increments.
Overall Table Lengths: 12 ft. (3.7 m), 24 ft. (7.3 m), 36 ft. (11.0 m),
48 ft. (14.6 m) and 60 ft. (18.3 m). Custom lengths available in 4 ft.
(1.2 m) increments

*** Check with manufacturer for any difference between the machine being sold and what is stated in the manufacturer’s website.

Digital Equipment Cutters

Catalog Item #


Condition of Item

Good Working

Date of Initial Listing

October 12, 2021




There are no reviews yet.

Be the first to review “Eastman M9000 Routing & Cutting Table (used) Item # UE-101221C (Washington)”

Your email address will not be published.