Catalog

Equipment Lot: Scott 5000 Tab Machine, Duplo 200 UV Coater & Duplo Lifter and Stacker (Used) Item # UE-011821B (Washington)

SKU: UE-011821B

Equipment Lot: Scott 5000 Tab Machine, Duplo 200 UV Coater & Duplo Lifter and Stacker

Click Here to Contact Us for Pricing

Available Items in Lot:

    • SKU # UE-011821B-2  Duplo Ultra 200A UV Coater
    • SKU # UE-011821B-3 Duplo Lifter and Stacker
    • SKU # UE-011821B-4 Rhin-O-Roll Coiler
    • SKU # UE-011821B-5 Scott Loose Leaf Sheet Reinforcing Machine
    • SKU # UE-011821B-6 Fiery Server
    • SKU # UE-011821B-7 Scott Plastic Index Tab Machine
    • SKU # UE-011821B-8 Scott Plastic Index Cutting Machine
    • SKU # UE-011821B-9 Supplies Used with Scott Machines
    • SKU # UE-011821B-10 DUPLO SF-200 20″ AIR SUCTION AUTO FEEDER

Sold Items in Lot:

    • SKU # UE-011821B-1  Scott 5000 Tab Machine

From the seller: “All equipment in this lot are in good working condition unless otherwise specified below.”

Machines can be purchased as a lot or individually.  See below for individual item pricing.


UE-011821B-1  Scott 5000 Tab Machine (Sold)

Manufactured: 08/02

***From the manufacturer & web:

The Scotty 5000 has taken the best features of the Scott Ten Thousand Automatic Plastic Index Tabbing Machine (aka Scott 10000 Automatic Plastic Index Tabber) and incorporated them into a compact unit. The Scotty 5000 uses a platen plastic sealing system that heats only the tab extension and an adjustable dwell function allows you to hold the sheet for a pre-determined time. Therefore, some difficult stocks that require special handling are easier to run. Unlike many pieces of automated equipment that require large runs because of make ready time, the Scotty 5000 is actually much faster to configure and get moving with jobs. The fast dial counter allows quick changeover of plastic length, tab cut width, as well as the position of the plastic on the paper. It is an excellent machine for long or short runs. Adjustments for film lengths, tab size and position is precisely measured to .01 and is easily repeatable.

This unit will laminate and tab cut up to 4,200 laminated index tabs per hour. Plain tabs will run at over 5,500 per hour. The Scotty 5000 is built in the Scott-Precision tradition. There is also an option available for the Scotty that allows you to run an 18 1/2-inch long sheet.

The Scotty 5000 Tabber automatically feeds, laminates and tab cuts products with the touch of a button. Turn around time is reduced while control of your job is maintained. It’s the machine of choice for trade binderies or any application where control of the materials provided for finishing are going to vary and is excellent for long or short runs. Adjustments for film lengths, tab size and position are precisely measured to .01 inches and are easily repeatable.

Manufacturer: Scott Precision
Type: Plastic Tab Machine


UE-011821B-2  Duplo Ultra 200A UV Coater  

 

***From the Manufacturer:

Offline UV coating system for short- to mid-volume runs

Simple to use and compact in size, the Ultra 200A applies a high quality gloss, matte, or satin finish to a wide range of offset and digitally-printed applications, enhancing the richness of its colors while protecting them from scratches and scuffs. The Ultra 200A UV coating machine offers unique capabilities for coating both sides of the sheet with no additional adjustments required. Print providers can offer double the value by coating both sides of direct mailers, brochures, business cards, book covers, and more!

Key Features

  • Adds a high quality gloss, matte, or satin finish
  • Handles both offset and digital print applications
  • Coats both sides of the sheet with a smear-free finish
  • Accommodates 20″ x 28″ sheet sizes
  • Standard SF-200 Suction Feeder handles high volume jobs
  • IR heater and automatic cleaning system

Coating Speed: 36 – 66 feet per minute

Selectable Speeds: 36/46/56/66 feet per minute

Paper Thickness: 120 – 350 gsm

Sheet Size: Max 20” x 28” Min 8.5” x 11”

3 Coating Rollers: Metering, Application, Pressure

Detection Functions: Paper jam, lamp life indicator, paper stack full, low coating, coating empty, open safety cover, over heating

Warm Up Time: UV lamp 90 seconds

UV Lamp Power: 150W per square inch

Auto Cleaning: Yes

Conveyor Length: 56.70″

Roller Gap Setting by 0.1 mm gaps: Simple manual adjustment for application and pressure rollers

Control Panel: Simple keypad, programming and adjustments done through Intelligent Control System

Standard Functions: UV oil purging, priming, self-diagnostic tool, power save

Standard Features: SF-200 Suction Feeder, IR heater, Hand feed tray

Power Supply: Single phase, 208 – 240V 60Hz 29A

Power Consumption (including IR) 4.6 KW

Noise Emission: 69.6 dB(A)

Dimensions: 70″ L x 42″ D x 49″ H weight: 1,067 Lbs.

SF-200 Suction Feeder:

Speed Up to 66 feet per minute

Stacker Capacity: 7.5” or 70.5 lbs.

Feed Process: Top feeding air suction belt

Counters: Total, batch

Paper Sizes:

Max 20” x 20” (Max. paper length of 28” with optional extended tray- feeder capacity will be limited to 3”)

Min 8.5” x 11”

Detection Functions: Double sheet detector

Power: 115/230V 50/60Hz 1.9A

Dimensions: 21″ x 31″ x 46″ Weight: 225 Lbs.___


UE-011821B-3 Duplo Lifter and Stacker


UE-011821B-4 Rhin-O-Roll Coiler  $ Call for Pricing

Model HD-4170

There are two of these available.


UE-011821B-5 Scott Loose Leaf Sheet Reinforcing Machine 

There are two machines available.

 

***From the manufacturer:

Specifications

Speed: 5,000 reinforced sheets per hour

Length: 8″ Minimum

Width: 17″ max 3-1/2″ min

Paper Weight: 6-point to 17-point paper

Plastic Size Width: 9/16 inches to 3/4 inches (14.3 to 19.1mm)

Electrical Requirement: 18 amp, 120 VAC, 60hz


UE-011821B-6 Fiery Server  $ Call for Pricing

From the seller “Was the computer server used for some of the different equipment”


UE-011821B-7 Scott Plastic Index Tab Machine  $ Call for Pricing


UE-011821B-8 Scott Plastic Index Cutting Machine  $ Call for Pricing


UE-011821B-9 Supplies Used with Scott Machines  $ Call for Pricing

Mylar Film used with Scott Tab Machine.

For use in creating tabs

***From the manufacturer:

Our high performance adhesive formulation boosts your productivity excels in sealing quality and high speed operation at far lower operating temperatures than conventional tabbing films. We engineered this adhesive to liquefy and permeate paper fibers almost instantly as low as 180°F, making it perfect for use on both digital and offset printing. Besides allowing consistent and high quality adhesion to heat sensitive printing, the lower operating temperatures are safer for your personnel and will also save a great deal of money by substantially reducing wear and tear on.

All colors and clear are manufactured in:

Low Temperature

Recommended sealing temperatures 180° – 250°· F

Reduces ink pick-off on printed body jobs

Reduces paper curl

Seals to a variety of paper stocks including gloss paper

Color consistency (no blotches)

Manufacturing capabilities:

Variety of colors

Available in 2000’ or 4000’ rolls

Variety of slit widths

Low minimum order quantity on standard stock items (1-5/8″ x 2000’)


UE-011821B-10 DUPLO SF-200 20″ AIR SUCTION AUTO FEEDER $ Call for Pricing

*** From the manufacturer & web

Provides minimal reloading and increased productivity.

The 7.5” stack capacity utilizes an air suction feeding system that feeds from the top of the stack to reduce marking on the sheets.

The feeder automatically sets the gap between each sheet to ensure no sheets overlap while the double feed detection ensures the coating process stops when two or more sheets have been fed.

Speed is Up to 66 feet per minute

The Duplo SF-200 20″ Air Suction Auto Feeder provides minimal reloading and increased productivity. With a 7.5” stack capacity, the SF-200 utilizes an air suction feeding system that feeds from the top of the stack to reduce marking on the sheets. The feeder automatically sets the gap between each sheet to ensure no sheets overlap while the double feed detection ensures the coating process stops when two or more sheets have been fed.

Product Details

  • Speed: Up to 66 feet per minute
  • Stacker Capacity: 7.5″ or 70.5 lbs.
  • Feed Process: Top feed air suction belt
  • Counters: Total, batch
  • Paper Sizes: 8.5″ x 11″ to 20″ x 20″ (max paper length of 28″ with optional extended tray-feeder capacity will be limited to 3″)
  • Detection Functions: Double sheet detector
  • Weight: 225 lbs.
  • Power: 115/230V 50/60Hz 1.9A
  • Options: Extended feed tray
  • Part Number: SF-200

 

 

 

This machine can be picked up in Washington or have it shipped for additional fee.

 

*** Although we strive for accuracy, some specifications are provided to us by seller. It is a good idea to double check specifications by manufacturing company for possible errors of information. Feel free to call us if you have further questions before purchasing.

Catalog Item #

UE-011821B

Date of Initial Listing

January 18, 2021

Location

Washington

Reviews

There are no reviews yet.

Be the first to review “Equipment Lot: Scott 5000 Tab Machine, Duplo 200 UV Coater & Duplo Lifter and Stacker (Used) Item # UE-011821B (Washington)”

Your email address will not be published.