Used
Baileigh 5 x 10 CNC Router
SKU: UR-27
Manufacturer: Baileigh
Baileigh 5 x 10 CNC Router
From the seller "This used router was in good working condition."
Size: 5 ft x 10 ft
Year: 2016
$ Call for Pricing
Customers can pick this machine up in Pennsylvania or have it shipped for an additional fee. Buyer is responsible for all rigging and freight cost
About this Item
Manufacturer's Information:
Specifications:
Actual Working Area 118" x 59"
Speeds Variable
RPM 3,000 - 18,000
Z Axis Stroke 7.5"
Maximum Moving Speed 787 Inches Per Minute
Maximum Engraving Speed 787 Inches Per Minute
Repostion Accuracy 0.0015
Tool Diameters 1/8", 1/4", & 1/2"
Power 220V - Three Phase
Length 168"
Width 72"
Height 45"
Weight 2500 lbs.
Table Style Vacuum
Magazine Size 8 Tools
Vacuum Pump Included
UCANCAM SOFTWARE (INCLUDED)
***Concerning "Used" Items: Although we strive for accuracy, some specifications are provided to us by the Seller. Cross-check with manufacturer for any difference between the machine being sold and what is stated in the manufacturer's information. Descriptions of condition of the equipment are not warranties. Descriptions are intended only as a courtesy and their accuracy is not guaranteed. Buyer inspection encouraged. There are no warranties or guarantees implied unless otherwise stated. All items are sold "As Is, Where Is, and With All Faults." No guarantee is made as to fitness for a particular purpose, implied or otherwise. Feel free to contact us if you have further questions before purchasing.
Features:
Large 5? x 10? table.
Arrives pre-built with correct alignment. No complicated set-up process.
Comes with software for plotting out designs on your computer, then turning them into cut patterns for the machine.
Runs on 220-volt 3-phase power.
Powerful 7.3 hp spindle can tackle hard materials without flinching.
5.5 kilowatt water-cooled spindle will stay accurate through years of production.
Variable spindle speed, from 3,000 to 18,000 rpm.
Yaskawa brand servo motors ensure smooth running at both fast and slow speeds.
High gantry is up and away from material, allowing you to see what it?s doing.
Y axis moves far enough for the gantry to clear the table. You can take the material directly off; no need slant it awkwardly.
Upload your design to the table with a USB drive.
You can operate the machine from the console podium.
Automatic tooling changes let you swap out bits with computer-controlled precision.
Sensor compensates for the change in tool lengths. That change might seem tiny, but it makes a huge difference to the finished product.
Pre-load up to 7 collets with your chosen profiles; the router will switch between them as programmed.
Powerful vacuum in the bed of the table holds the material in place during the cutting process.
6 vacuum zones allow you to turn on the valve only for the area where you?re working.
Arrange each zone?s vacuum seal into the shape of the material to provide well-distributed suction.
Dust shroud fits over the spindle; you can vacuum out all the dust and chips while you?re cutting.
Fully-welded steel frame keeps the machine stable, helping the router last longer and preventing vibrations from taking the cut off-course.
Pricing & Shipping
Interested in the product? Fill out the form or call us at 330-405-9421 for pricing and other information.
Product is located in Pennsylvania. Customers can pick the machine up or have it shipped for an additional fee.
Can't Find the Equipment You Need?
We're constantly getting new listings. Let us know what you're looking for and we'll notify you when the equipment is available.
Turn Your Old Equipment Into Cash
No longer need your equipment? We can help.