Picture Framing Equipment Lot: Pistorius Double Miter Saw, Morso Chopper, Brevetti Saw, Cassese 299M Joiner & Supplies

UE-112020A-1 CTD D45 Double Miter Saw

***Manufacturer's Information:

Manufacturer's Website: http://ctdsaw.com - Instruction manual can also be found here:

CTD D45 Fixed 45 Degree Frame Saw

The D45 is popular world wide because of its unique features, low cost and precision. Engineered for higher production, this double mitre saw makes two 45 degrees mitres at one time, saving time and materials. D45's are used by thousands in the decorative arts trade throughout world.

Designed to cut Aluminum, Wood, plastics, composites, aluminum extrusions, plastic extrusions, non-ferrous metals.

- Blade Capacity: 10" OD (254mm) ,12'' OD, 14'' OD
- Spindle & Pivot: Both mounted on pre-loaded and sealed ball bearings.
- Arbor: 5/8 (16mm) with 2-1/4 (57mm) saw collars.
- Iron Castings: Saw arm, pivot brackets and table are precision machined and ground with milled slots in table to guide pivot brackets and fences.
- Motors & Voltages: 1-1/2 H.P., 3450 RPM with Dual Magnetic Starter.
- Table Height: 34-1/2 (88cm) from floor.
- Floor Stand: Close coupled heavy gage steel stand completely enclosed with 6 dust outlet. 1200 CFM required.
- Length of stroke adjustment: The D45AX is unique in that the stroke of the machine and the position of the blade above the work can be adjusted to use only the stroke needed to cut a particular moulding or extrusion. Saw heads reverse immediately, on release of the foot valve, thereby saving wasted time and motion.
- Production Rate: The D45AX is capable of cycling at one second intervals. However, actual production rates vary with the type and width of material to be cut.
- Size: Standard machine, without tables or gages; weight 550 lbs. 46'' wide x 22'' front to back x 51-1/2'' high.
- Actuation: Pneumatic foot valve with cover
- Air Pressure: 75 PSI with Air Filter/Regulator/Lubricator; includes Auto Drain.
- Air Consumption: 1.0 CF per 10 strokes at 75 PSI.

UE-112020A-2 OMGA Double Miter Saw

UE-112020A-3 Brevetti Prisma CE Double Miter Saw

***Manufacturer's Information:

Features:

- Functional, attractive double blade miter saw well suited to low to medium volume custom frame shop whose market demands larger moldings for its frames
- Cuts molding up to 7" wide by 3 1/4" high
- Right and left moulding support arms with attached measure marks
- Sliding stop to facilitate multiple accurate, equal length cuts
- Mechanical clamps to hold molding secure during cutting stroke to help maintain smooth and accurate cuts in the moulding and reduce waste
- Includes two high quality 275 mm, 80 tooth blades from Tenryu, manufacturer of industrial saw blades for 100 years. (100 tooth blades optional)

Specifications:
- (2) 275mm (10-13/16") saw blades/ bore 32mm(1-1/4")/ 80 tooth (100 tooth available)
- (2) 1.5HP 220V/60Hz single phase motors
- (2) 52 1/2" molding support arms
- (2) mechanical hold down clamps for moulding
- 78 3/4" measuring scale
- Cuts molding up to 7" wide by 3 1/4" high
- Right sliding stop for repeatable cuts
- Blade Rotation speed - 3200 RPM
- Dimensions - 48" (w) x 27 9/16" (d) x 44 1/16" (h)
- Weight 363 lbs

UE-112020A-4 Morso Chopper

UE-112020A-5 Cassese 299M Underpinner / Joiner / Vnailer

UE-112020A-6 Dust Collector

UE-112020A-7 Sealeze Laminator

UE-112020A-8 Jyden Chopper